Accumulation of nutrients in soils affected by perennial colonies of piscivorous birds with reference to biogeochemical cycles of elements.

S. Ligęza,H. Smal

DOI: https://doi.org/10.1016/S0045-6535(03)00241-8

IF: 8.8

2003-07-01

Chemosphere

Abstract:

What problem does this paper attempt to address?

[Overview of percutaneous ablation therapy].

T. Ishikawa,T. Teratani,R. Tateishi,S. Shiina,M. Omata

2001-10-01

Abstract:
Effects of Incorporation of Nano-Fluorapatite or Nano-Fluorohydroxyapatite on a Resin-Modified Glass Ionomer Cement

Jun Lin,Jiajun Zhu,Xiaoxia Gu,Wenjian Wen,Qingshan Li,Helge Fischer-Brandies,Huiming Wang,Christian Mehl

DOI: https://doi.org/10.1016/j.actbio.2010.10.029

IF: 10.633

2011-01-01

Acta Biomaterialia

Abstract:This study aimed to investigate the fluoride release properties and the effect on bond strength of two experimental adhesive cements. Synthesized particles of nano-fluorapatite (nano-FA) or nano-fluorohydroxyapatite (nano-FHA) were incorporated into a resin-modified glass ionomer cement (Fuji Ortho LC) and characterized using X-ray diffraction and scanning electron microscopy. Blocks with six different concentrations of nano-FA or nano-FHA were manufactured and their fluoride release properties evaluated by ultraviolet spectrophotometry. The unaltered glass ionomer cement Fuji Ortho LC (GC, control) and the two experimental cements with the highest fluoride release capacities (nano-FA+Fuji Ortho LC (GFA) and nano-FHA+Fuji Ortho LC (GFHA)) were used to bond composite blocks and orthodontic brackets to human enamel. After 24h water storage all specimens were debonded, measuring the micro-tensile bond strength (μTBS) and the shear bond strength (SBS), respectively. The optimal concentration of added nano-FA and nano-FHA for maximum fluoride release was 25wt.%, which nearly tripled fluoride release after 70days compared with the control group. GC exhibited a significantly higher SBS than GFHA/GFA, with GFHA and GFA not differing significantly (P>0.05). The μTBS of GC and GFA were significantly higher than that of GFHA (P⩽0.05). The results seem to indicate that the fluoride release properties of Fuji Ortho LC are improved by incorporating nano-FA or nano-FHA, simultaneously maintaining a clinically sufficient bond strength when nano-FA was added.
Synthesis and Characterization of an Anti-Caries and Remineralizing Fluorine-Containing Cationic Polymer PHMB-F.

Y. D. Chen,C. Shu,Z. H. Duan,J. J. Xu,X. J. Li,F. Chen,Q. J. Luo,X. D. Li

DOI: https://doi.org/10.1039/d0bm01627f

2021-01-01

Biomaterials Science

Abstract:Dental caries have become a major global public health problem. Plaque control and remineralization of initial enamel lesions are paramount for the prevention and control of caries. Polyhexamethylene biguanide (PHMB) is a type of cationic amphipathic antibacterial agent with broad-spectrum antibacterial properties and good biological safety. Fluoride delays demineralization and promotes the remineralization of hard dental tissues. However, a high concentration is needed for it to function as an antibacterial agent. In order to create a PHMB with the benefits associated with fluoride, we synthesized a fluorine-containing cationic polymer, PHMB-F. Fourier transform-infrared spectroscopy and solid state nuclear magnetic resonance characterization confirmed the successful synthesis of PHMB-F. Antibacterial tests showed that PHMB-F had better antiseptic efficacy for Streptococcus mutans compared with just PHMB. Moreover, positively-charged PHMB-F allows fluoride ions to exist closer to the enamel surface with negative potential, which markedly lowers the ion concentrations in the microenvironment adjacent to hard dental tissues needed to maintain equilibrium. Thus, only low concentrations of PHMB-F are required for enamel remineralization.
Novel Nano Calcium Fluoride Remineralizing and Antibacterial Dental Composites

Heba Mitwalli,Rashed AlSahafi,Ebtehal G Albeshir,Quan Dai,Jirun Sun,Thomas W Oates,Mary Anne S Melo,Hockin H K Xu,Michael D Weir

DOI: https://doi.org/10.1016/j.jdent.2021.103789

Abstract:Objective: Composites with remineralizing and antibacterial properties are favorable for caries inhibition. The objectives of this study were to develop a new bioactive nanocomposite with remineralizing and antibiofilm properties by incorporating dimethylaminohexadecyl methacrylate (DMAHDM) and nano-calcium fluoride (nCaF2). Methods: nCaF2 was produced via a spray-drying method and integrated at 15% mass fraction into composite. DMAHDM was added at 3% mass fraction. Mechanical properties and F and Ca ion releases were assessed. Colony-forming units (CFU), lactic acid and metabolic activity of biofilms on composites were performed. Results: The new composites had flexural strengths of (95.28±6.32) MPa and (125.93±7.49) MPa, which were within the ISO recommendations. Biofilm CFU were reduced by 3-4 log (p<0.05). The composites achieved high F releases of (0.89±0.01) mmol/L and (0.44±0.01) mmol/L, and Ca releases of (1.46±0.05) mmol/L and (0.54±0.005) mmol/L. Conclusions: New nanocomposites were developed with good mechanical properties, potent antibacterial activity against salivary biofilms, and high F and Ca ion releases with potential for remineralization. Clinical significance: Novel nanocomposites using nCaF2 and DMAHDM were developed with potent antibacterial and remineralizing effects and high F and Ca ion releases. They are promising to inhibit recurrent caries, promote remineralization, and possess long-term sustainability.
Novel CaF2 Nanocomposites with Antibacterial Function and Fluoride and Calcium Ion Release to Inhibit Oral Biofilm and Protect Teeth

Heba Mitwalli,Abdulrahman A. Balhaddad,Rashed AlSahafi,Thomas W. Oates,Mary Anne S. Melo,Hockin H. K. Xu,Michael D. Weir

DOI: https://doi.org/10.3390/jfb11030056

2020-08-01

Journal of Functional Biomaterials

Abstract:(1) Background: The objective of this study was to develop a novel dental nanocomposite containing dimethylaminohexadecyl methacrylate (DMAHDM), 2-methacryloyloxyethyl phosphorylcholine (MPC), and nanoparticles of calcium fluoride (nCaF2) for preventing recurrent caries via antibacterial, protein repellent and fluoride releasing capabilities. (2) Methods: Composites were made by adding 3% MPC, 3% DMAHDM and 15% nCaF2 into bisphenol A glycidyl dimethacrylate (Bis-GMA) and triethylene glycol dimethacrylate (TEGDMA) (denoted BT). Calcium and fluoride ion releases were evaluated. Biofilms of human saliva were assessed. (3) Results: nCaF2+DMAHDM+MPC composite had the lowest biofilm colony forming units (CFU) and the greatest ion release; however, its mechanical properties were lower than commercial control composite (p 0.05). Fluoride and calcium ion releases from nCaF2+DMAHDM were much more than commercial composite. Biofilm CFU on composite was reduced by 4 logs (n = 9, p < 0.05). Biofilm metabolic activity and lactic acid were also substantially reduced by nCaF2+DMAHDM, compared to commercial control composite (p < 0.05). (4) Conclusions: The novel nanocomposite nCaF2+DMAHDM achieved strong antibacterial and ion release capabilities, without compromising the mechanical properties. This bioactive nanocomposite is promising to reduce biofilm acid production, inhibit recurrent caries, and increase restoration longevity.
Evaluation of remineralization potential and mechanical properties of pit and fissure sealants fortified with nano-hydroxyapatite and nano-amorphous calcium phosphate fillers: An in vitro study

Shivani Utneja,Sangeeta Talwar,Ruchika Roongta Nawal,Sameer Sapra,Mona Mittal,Amit Rajain,Mahesh Verma

DOI: https://doi.org/10.4103/JCD.JCD_31_18

Abstract:Objectives: The aim of this study was: (i) to formulate pit and fissure sealants (PFS) containing nano-hydroxyapatite (nHAP) filler; nHAP filler and silica co-filler; nHAP and nano-Amorphous Calcium Phosphate (nACP) co-filler, (ii) to evaluate physical properties; degree of conversion (DOC), curing depth (CD) and mechanical properties; microshear bond strength (MBS) of fortified PFS, and (iii) to assess remineralization potential and release of Ca2= and PO4 ions from newly synthesized sealants. Materials and methods: Four PFS were prepared using monomers with mixture of 35.5 wt % BisGMA, 35.5 wt % triethylene glycol dimethacrylate and 28 wt % hydroxyethyl methacrylate. Bioactive nanofillers (nHAP and n-ACP) were added in various concentrations (0%-30%). Three commercial sealants were used as follows: unfilled (Clinpro; 3M ESPE), Fluoride releasing (Delton FS plus, Dentsply), ACP filled (Aegis, Bosworth). The samples (n = 35.5/gp) were tested for MBS, DOC, and CD. Remineralization potential was assessed by scanning electron microscopy (SEM). The concentrations of Ca2= and PO4 released from the sealant specimens were analyzed with Ultraviolet-visible Spectrophotometer. Data obtained was statistically analyzed (one-way analysis of variance, Tukey's test, P < 0.05). Results: 10% hydroxyapatite (HAP) =20% ACP sealant showed significantly higher DOC. A remineralized region on the surface between fissure sealant and tooth enamel was observed by SEM in all three HAP filled bioactive sealants. Decreasing the solution pH significantly increased ion release from sealant filled with 10% nHAP = 20% nACP (P ≤ 0.001). Conclusion: Results suggested that admixture of nHAP and nACP to PFS showed remineralizing capability, without declining their mechanical and physical properties.
Development of Novel Polymerizable Antibacterial Monomer and Its Antibacterial Effects on Dental Adhesive

Xu Jiajia,Li Xiaojun,Zhu Weipu,Duan Zhuhui,Mao Yingjie,Li Xiaodong

DOI: https://doi.org/10.7503/cjcu20190138

2019-01-01

Abstract:The object of the present study was to Functionalize adhesive system with antibacterial activity without interfering the bonding effect, to kill bacteria residue on cavity and prevent bacteria from colonization on the margins of bonding. The fluorine -containing imidazolium salt antibacterial monomer was synthesized by the combination reaction of 1-chlorododecane and 1-vinylimidazole, and the replacement reaction to introduce fluoride ion. The synthesized intermediate product and final product were characterized by nuclear magnetic resonance spectroscopy. Fluoride ion was introduced into the bonding system in the form of organic fluorine, and the release behavior of fluoride ion from the functionalized adhesive was studied. The antibacterial experiment showed that the functionalized adhesive was endowed with good antibacterial property, which realized targeted anti -caries ability. The bond strength test indicated that the functionalization with the fluorine -containing imidazolium salt monomer did not affect the bonding performance of the adhesive. These results suggested that adhesive functionalized with the fluorine -containing imidazolium salt monomer had potential for reducing the occurrence of clinical secondary caries.
Effect of an Antibacterial Monomer on the Antibacterial Activity of a Pit-and-Fissure Sealant.

Fan Yu,Haohan Yu,Pingting Lin,Yan Dong,Ling Zhang,Xiang Sun,Zhengya Liu,Huihui Guo,Li Huang,Jihua Chen

DOI: https://doi.org/10.1371/journal.pone.0162281

IF: 3.7

2016-01-01

PLoS ONE

Abstract:Resin-based pit-and-fissure sealants are often used to form a barrier on the occlusal surface of molars to treat caries lesions; however, bacteria can remain in the pit and fissures without detection, increasing the risk of secondary caries. Sealants with antimicrobial properties or microbial repellent actions might be advantageous. The aim of this study was to assess the inhibitory effect of a 2-methacryloxylethyl dodecyl methyl ammonium bromide (MAE-DB)-incorporated sealant against Streptococcus mutans. MAE-DB (4% wt) was incorporated into a commercially available sealant, Eco-S resin-based pit-and-fissure sealant (Vericom Co., Ltd., Korea); a sealant without MAE-DB served as a negative control, and Clinpro™ Sealant (3M™ ESPE™), a fluoride-releasing resin, was used as a commercial control. The effects of the cured sealants and their eluents on the growth of S. mutans were determined according to colony-forming unit counts and metabolic tests. The effects of the cured sealants on the adherence and membrane integrity of S. mutans were investigated using confocal laser-scanning microscopy (CLSM) in conjunction with fluorescent indicators. Compared with the negative control and commercial control, the cured MAE-DB-incorporated pit-and-fissure sealant exhibited a significant inhibitory effect on the growth of S. mutans (P < 0.05), whereas the eluents did not show any detectable antibacterial activity. The commercial control also showed no detectable bactericidal activity. Moreover, the aged experimental material retained its property of contact inhibition of biofilm formation. The fluorescence analysis of CLSM images demonstrated that the cured MAE-DB-incorporated sealant could hamper the adherence of S. mutans and exert a detrimental effect on bacterial membrane integrity. The incorporation of MAE-DB can render a pit-and-fissure sealant with contact antibacterial activity after polymerization via influencing the growth, adherence, and membrane integrity of S. mutans. Therefore, MAE-DB-containing pit-and-fissure sealant shows promise for preventing or controlling dental caries on occlusal pit and fissures of molars.
A fluoride rechargeable resin adhesive with long-term antibacterial effect for improved dental treatment

Daixing Zhang,Jiayi Guo,Yanyun Pang,Ming Liu,Yingjie Yu,Xiaoping Yang,Qing Cai

DOI: https://doi.org/10.1016/j.compositesb.2024.111939

IF: 11.322

2024-11-10

Composites Part B Engineering

Abstract:Polymerization shrinkage of composite resin during curing can form microcracks between the restoration and tooth tissue, facilitating bacterial colonization at the bonding interface and increasing the risk of secondary caries. Thus, developing antibacterial adhesives is crucial. This study synthesized a fluoride-containing dimethylaminohexadecyl methacrylate salt (DMAHDM-F) as a co-monomer to create a fluoride-rechargeable resin adhesive (FD-A) with long-term antibacterial properties. FD-A exhibits stable shear bonding strength, curing kinetics, high mechanical properties, and excellent biocompatibility. Its fluoride release can be sustained for over 1 year, achieving efficient antibacterial effect associated with the quaternary ammonium groups, being superior to those adhesives containing only NaF nanoparticles or quaternary ammonium groups. Of note, the FD-A adhesive is recharged with 10 ppm NaF solution after the one-year release test, and the re-fluorinated sample continues to release more fluoride ion, maintaining its antibacterial efficacy for extended period, which is a welcomed feature for dental applications. In summary, the photopolymerizable fluorinated quaternary ammonium salt provides a potential solution for making dental resin adhesives and composites with stable antibacterial effect to enhance the longevity of dental restorations.

engineering, multidisciplinary,materials science, composites
Kidney function during and after withdrawal of long-term irbesartan treatment in patients with type 2 diabetes and microalbuminuria.

S. Andersen,J. Bröchner-Mortensen,H. Parving

DOI: https://doi.org/10.2337/DIACARE.27.6.1521-A

2004-06-01

Diabetes Care

Abstract:OBJECTIVE Irbesartan is renoprotective in patients with type 2 diabetes and microalbuminuria. Whether the observed reduction in microalbuminuria is reversible (hemodynamic) or persistent (glomerular structural/biochemical normalization) after prolonged antihypertensive treatment is unknown. Therefore, the present substudy of the Irbesartan in Patients with Type 2 Diabetes and Microalbuminuria Study (IRMA-2) investigated the reversibility of kidney function changes after withdrawal of 2 years' antihypertensive treatment. RESEARCH DESIGN AND METHODS The substudy included 133 hypertensive type 2 diabetic patients with persistent microalbuminuria in IRMA-2, randomized to double-masked treatment with either placebo, irbesartan 150 mg, or irbesartan 300 mg o.d. for 2 years. Arterial blood pressure, overnight urinary albumin excretion rate, and glomerular filtration rate (GFR) were determined repeatedly. RESULTS Baseline characteristics were similar in the placebo, irbesartan 150-mg, and irbesartan 300-mg groups. At the end of the study, mean arterial blood pressure (MABP) was similarly lowered to 105 +/- 2 (mean +/- SE), 103 +/- 2, and 102 +/- 2 mmHg, respectively (P < 0.05 versus baseline), and urinary albumin excretion rate reduced by 8% (-16 to 27) (NS), 34% (95% CI 8-53), and 60% (46-70) (P < 0.05). Rates of decline in GFR were 1.3 +/- 0.7, 1.2 +/- 0.7, and 1.0 +/- 0.8 ml. min(-1). 1.73 m(-2) per month, respectively, during the initial 3 months of the study and 0.3 +/- 0.1, 0.3 +/- 0.1, and 0.4 +/- 0.1 ml. min(-1). 1.73 m(-2) per month in the remaining study period. One month after withdrawal of all antihypertensive medication, MABP remained unchanged in the placebo group, 105 +/- 2 mmHg, but increased significantly in the irbesartan groups, to 109 +/- 2 and 108 +/- 2 mmHg, respectively. Compared with baseline, urinary albumin excretion rate was increased by 14% (-17 to 54) in the placebo group and by 11% (-26 to 65) in the irbesartan 150-mg group but was persistently reduced by 47% (24-73) in the irbesartan 300-mg group (P < 0.05). GFR levels increased to baseline values in the placebo group and approached initial levels in irbesartan groups. CONCLUSIONS Persistent reduction of microalbuminuria after withdrawal of all antihypertensive treatment suggests that high-dose irbesartan treatment confers long-term renoprotective effects.
Ethanol and signal transduction in the liver

Jan B. Hoek,A. Thomas,T. A. Rooney,K. Higashi,E. Rubin

DOI: https://doi.org/10.1096/fasebj.6.7.1563591

1992-04-01

The FASEB Journal

Abstract:The liver is a major target for both short‐ and long‐term actions of ethanol. The mechanisms that mediate the response of cells and tissues to chronic intake of ethanol are unknown, but it is likely that both adaptive and deleterious responses are triggered by short‐term interactions of the cell with ethanol. Cellular signaling processes are candidates to mediate the connection between short‐ and long‐term actions of ethanol. Receptor‐coupled signal transduction systems in the plasma membrane of many different cell types are affected by ethanol. In the liver, the signaling processes associated with phospholipases C and D are particularly responsive to ethanol. In this review, we investigate the direct and indirect short‐term effects of ethanol on the signal transduction systems in liver and discuss the possible implications for the responses of the liver to chronic ethanol exposure.—Hoek, J. B.; Thomas, A. P.; Rooney, T. A.: Higashi, K.; Rubin, E. Ethanol and signal transduction in the liver. FASEB J. 6: 2386‐2396; 1992.
Physical–Mechanical Properties and Mineral Deposition of a Pit-and-Fissure Sealant Containing Niobium–Fluoride Nanoparticles—An In Vitro Study

Alyssa Teixeira Obeid,Tatiana Rita de Lima Nascimento,Carlos Alberto Spironelli Ramos,Rafael Francisco Lia Mondelli,Alessandra Nara de Souza Rastelli,Abdulaziz Alhotan,Marilia Mattar de Amoêdo Campos Velo,Juliana Fraga Soares Bombonatti

DOI: https://doi.org/10.3390/ma17215378

IF: 3.4

2024-11-05

Materials

Abstract:This study investigated the combined effects of adding niobium–fluoride (NbF5) nanoparticles to a pit-and-fissure sealant. One resin sealant was reinforced with varying amounts of nanoparticles (0.3, 0.6, and 0.9 wt%). The surface hardness (SH), energy-dispersive X-ray spectroscopy (EDX), surface roughness (Ra), color change (ΔE), and mineral deposition were assessed. Bovine enamel blocks were subjected to demineralization and pH-cycling for SH. The elemental composition and Ca/P ratio were evaluated using EDX, while the mineral deposition was measured using Fourier transform infrared spectroscopy (FTIR). Data were analyzed using ANOVA and Tukey's test for the SH and EDX, ΔE, and Kruskal–Wallis for the Ra. The NbF5 modification increased the SH, with the 0.9 wt% sealant exhibiting higher SH values, and the 0.3 wt% one exhibiting significant differences compared to the control and the 0.9 wt% (p = 0.00) samples, even after pH-cycling. For the EDX analysis, the 0.3 and 0.6 wt% samples exhibited higher Ca/P ratios, with the 0.3% one showing evidence of P-O crystal formation. There was no significant difference in the Ra (p = 0.458), and the 0.6 and 0.9 wt% ones showed lower ΔE values compared to the control. The 0.3 wt% NbF5 demonstrated improved overall properties, making these results particularly promising for preventing tooth decay, reducing demineralization through increased ions release and promoting remineralization in posterior teeth.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Fluorinated Montmorillonite and 3YSZ as the Inorganic Fillers in Fluoride-Releasing and Rechargeable Dental Composition Resin

Keng-Yuan Li,Cheng-Chia Tsai,Tzu-Chieh Lin,Yin-Lin Wang,Feng-Huei Lin,Chun-Pin Lin

DOI: https://doi.org/10.3390/polym12010223

IF: 5

2020-01-16

Polymers

Abstract:Dental caries (tooth decay) is the most frequent oral disease in humans. Filling cavities with a dental restorative material is the most common treatment, and glass ionomer cements are the main fluoride ion release restorative materials. The goal of this study was to develop a restorative compound with superior fluoride ion release and recharge abilities. Previously developed fluorinated bentolite and hydrophobized 3YSZ were used as two different inorganic fillers mixed in a bisphenol A-glycidyl methacrylate (Bis-GMA) matrix. XRD, FTIR, and TGA were used to determine the hydrophobic modification of these two inorganic fillers. In mechanical tests, including diameter tensile strength, flexural strength, and wear resistance, the developed composite resin was significantly superior to the commercial control. A WST-1 assay was used to confirm that the material displayed good biocompatibility. Furthermore, the simulation of the oral environment confirmed that the composite resin had good fluoride ion release and reloading abilities. Thus, the composite resin developed in this study may reduce secondary caries and provide a new choice for future clinical treatments.

polymer science
"Normal" values for African patients.

C. Roberts

Central African Journal of Medicine

Abstract:
Novel antibacterial dental resin containing silanized hydroxyapatite nanofibers with remineralization capability

Ludan Qin,Shuo Yao,Wenqing Meng,Jiajia Zhang,Ruirui Shi,Chuanjian Zhou,Junling Wu

DOI: https://doi.org/10.1016/j.dental.2022.11.014

Abstract:Objectives: Secondary caries is the primary issue that causes restoration failure. The objectives of this study were to: (1) synthesize silanized hydroxyapatite nanofibers loaded with erythromycin (s-HAFs@EM); (2) evaluate the mechanical property, antibacterial activity, and remineralization capability of the novel dental resin containing s-HAFs@EM. Methods: s-HAFs were prepared by the solvothermal approach and loaded with EM. Characterization and antibacterial activity were evaluated. Subsequently, s-HAFs@EM were incorporated into dental resin at different mass fractions (5 %, 10 %, 15 %, and 20 %), and then they were submitted to characterization, including mechanical property, antibacterial activity, remineralization capability, and cytotoxicity. Results: s-HAFs@EM were successfully synthesized, and they exhibited excellent antibacterial activity. Resin containing 15 % s-HAFs@EM exhibited the best flexural strength (118.67 ± 15.71 MPa) and elastic modulus (2.02 ± 0.30 GPa) (P < 0.05), which were increased by 65.43 % and 90.7 %, compared to those of neat resin, respectively. Resin with 15-20 % s-HAFs@EM showed high antibacterial rate (>85 %) when compared control group (P < 0.05). Furthermore, resin also exhibited a definite remineralization capability and good biosafety in vitro. Significance: This novel multifunctional resin with improved mechanical property, desirable antibacterial activity and remineralization capability is promising to combat secondary caries.
Improving antibacterial performance of dental resin adhesive via co-incorporating fluoride and quaternary ammonium

Daixing Zhang,Shuangting Li,Hongyang Zhao,Ke Li,Yiwei Zhang,Yingjie Yu,Xiaoping Yang,Qing Cai

DOI: https://doi.org/10.1016/j.jdent.2022.104156

IF: 4.991

2022-07-01

Journal of Dentistry

Abstract:OBJECTIVE: Aiming to achieve improved antibacterial performance for dental application, sodium fluoride (NaF) nanoparticles and photopolymerizable N,N-dodecylvinylimidazole (DCV) were co-introduced into the dental resin adhesive at different ratios.METHODS: The respective effect of NaF and DCV on adhesive curing kinetic, antibacterial activities against Staphylococcus aureus (S. aureus), Escherichia coli (E. coli), and Bacterial Flora of Human saliva (HSBF) were comprehensively evaluated. Then, the synergistic effects of NaF nanoparticles and DCV on adhesive performance were studied in terms of fluoride ion (F-) release, antibacterial activity, hydrophilicity, surface potential, cytotoxicity, and bonding strength.RESULTS: DCV monomer could polymerize with other adhesive monomers without influencing C = C double conversion rate, while the addition amount of DCV would affect the hydrophilicity and bonding strength of the cured adhesives. The cationic quaternary ammonium group could reduce the burst release of negative F- for the adhesive at a NaF/DCV ratio (1:1, 2%), hence achieving both non-contact and contact antibacterial activity in an extended term without causing cytotoxicity.CONCLUSION: Mixing NaF nanoparticles and DCV into the dental resin adhesive can slow down the initial burst release of F- and prolong the release-type antibacterial effect. The ionic interaction between F- and quaternary ammonium groups, as well as, the effect of DCV on adhesive hydrophilicity, simultaneously influence the release behavior of F-. Co-incorporation of quanternary ammonium and fluoride improves adhesive's antibacterial performance for dental application.CLINICAL SIGNIFICANCE: Incorporating both NaF nanoparticles and DCV into dental resin adhesive could provide an efficient strategy for dental restoration as well as the prevention of secondary caries.

dentistry, oral surgery & medicine
A Multifunctional Dental Resin Composite with Sr-N-Doped TiO2 and n-HA Fillers for Antibacterial and Mineralization Effects

Yuanhang Zhao,Hong Zhang,Lihua Hong,Xinying Zou,Jiazhuo Song,Rong Han,Jiawen Chen,Yiyan Yu,Xin Liu,Hong Zhao,Zhimin Zhang

DOI: https://doi.org/10.3390/ijms24021274

IF: 5.6

2023-01-09

International Journal of Molecular Sciences

Abstract:Dental caries, particularly secondary caries, which is the main contributor to dental repair failure, has been the subject of extensive research due to its biofilm-mediated, sugar-driven, multifactorial, and dynamic characteristics. The clinical utility of restorations is improved by cleaning bacteria nearby and remineralizing marginal crevices. In this study, a novel multifunctional dental resin composite (DRC) composed of Sr-N-co-doped titanium dioxide (Sr-N-TiO2) nanoparticles and nano-hydroxyapatite (n-HA) reinforcing fillers with improved antibacterial and mineralization properties is proposed. The experimental results showed that the anatase-phase Sr-N-TiO2 nanoparticles were synthesized successfully. After this, the curing depth (CD) of the DRC was measured from 4.36 ± 0.18 mm to 5.10 ± 0.19 mm, which met the clinical treatment needs. The maximum antibacterial rate against Streptococcus mutans (S. mutans) was 98.96%, showing significant inhibition effects (p < 0.0001), which was experimentally verified to be derived from reactive oxygen species (ROS). Meanwhile, the resin exhibited excellent self-remineralization behavior in an SBF solution, and the molar ratio of Ca/P was close to that of HA. Moreover, the relative growth rate (RGR) of mouse fibroblast L929 indicated a high biocompatibility, with the cytotoxicity level being 0 or I. Therefore, our research provides a suitable approach for improving the antibacterial and mineralization properties of DRCs.

biochemistry & molecular biology,chemistry, multidisciplinary
Study on the mechanical and aging properties of an antibacterial composite resin loaded with fluoride-doped nano-zirconia fillers

Liyuan Zheng,Yi Zhang,Yuming Bai,Zhisheng Zhang,Qianju Wu

DOI: https://doi.org/10.3389/fbioe.2024.1397459

IF: 5.7

2024-05-24

Frontiers in Bioengineering and Biotechnology

Abstract:Preventing the occurrence of secondary caries serves as one of the significant issues in dental clinic, thus make it indispensable to improving the properties of conventional composite resin (CR) by developing a novel CR. In present study, two groups of experimental CRs loaded with different contents of fluoride-doped nano-zirconia fillers (25 wt% and 50 wt%) were fabricated. The surface topography, mechanical performance, fluoride release, antibacterial effect, aging property and cytotoxicity of the experimental CRs were evaluated subsequently. A uniform distribution of the F-zirconia fillers over the whole surface of resin matrix could be observed. The experimental CRs showed continuous fluoride release within 28 days, which was positively correlated with the content of F-zirconia fillers. Moreover, the amount of fluoride release increased in the acidic buffer. Addition of F-zirconia fillers could improve the color stability, wear resistance and microhardness of the experimental CRs, without reducing the flexure strength. Furtherly, the fluoride ions released continuously from the experimental CRs resulted in effective contact and antibacterial properties, while they showed no cytotoxicity. As a consequence, considerations can be made to employ this new kind of composite resin loaded with fluoride-doped nano-zirconia fillers to meet clinical requirements when the antimicrobial benefits are desired.

multidisciplinary sciences
Spray-drying-assisted fabrication of CaF2/SiO2 nanoclusters for dental restorative composites

Jing Cao,Dan-Lei Yang,Dan Wang,Jie-Xin Wang

DOI: https://doi.org/10.1016/j.dental.2022.04.007

Abstract:Objective: The objective of this study is to develop novel CaF2/SiO2 nanoclusters (NCs) fillers, which can endow the dental resin composites (DRCs) with excellent mechanical properties, stable and sustained fluoride ion release, and good antibacterial activity. Methods: The CaF2/SiO2 NCs were efficiently fabricated by assembling CaF2/SiO2 nanoparticles (NPs) as building blocks with a spray-drying technology. CaF2/SiO2 NCs with different SiO2 coating amounts (20 wt%, 50 wt% and 80 wt%) were incorporated into the DRCs at the filler content of 55 wt% for the measurement of mechanical properties including flexural strength, flexural modulus, compressive strength, and hardness. The effect of the filling amount of CaF2/50SiO2 NCs (50 represents 50 wt% SiO2 coating amount) in the DRCs was investigated, while CaF2/50SiO2 NPs were adopted as comparison group. The fluoride ion release and antibacterial activity of the DRCs with the optimal mechanical performances were evaluated. Furthermore, the statistical analyses were performed for mechanical properties. Results: Spherical CaF2/50SiO2 NCs with an average size of 2.4 µm were obtained at the feed rate of 7.4 mL/min and the CaF2/50SiO2 NPs solid content of 2 wt% in the suspension. The optimum comprehensive performances of the DRCs can be achieved by filling 55 wt% CaF2/50SiO2 NCs. Compared with CaF2/50SiO2 NPs, the filling amount of CaF2/50SiO2 NCs was increased by 5 wt% (50-55 wt%), and under the same filling amount of 50 wt%, the flexural strength, flexural modulus, compressive strength, and hardness of the DRCs containing CaF2/50SiO2 NCs were improved by 9.8%, 17.7%, 7.5% and 69.8%, respectively. Furthermore, the DRCs filled with 50 wt% CaF2/50SiO2 NCs exhibited more cumulative F-release by 126% and more stable F-release rate than the counterpart filled with 50 wt% CaF2/50SiO2 NPs after immersed for 1800 h. And 55 wt% CaF2/50SiO2 NCs filled DRCs could inhibit the growth of S. mutans, reaching an antibacterial ratio of 93%. Significance: The spray-dried CaF2/50SiO2 NCs are promising fillers for the development of high-performance multifunctional DRCs.
Using your electronic medical record for research: a primer for avoiding pitfalls.

A. Terry,Vijaya Chevendra,A. Thind,M. Stewart,J. Marshall,Sonny Cejic

DOI: https://doi.org/10.1093/fampra/cmp068

2010-02-01

Family Practice

Abstract:In Canada, use of electronic medical records (EMRs) among primary health care (PHC) providers is relatively low. However, it appears that EMRs will eventually become more ubiquitous in PHC. This represents an important development in the use of health care information technology as well as a potential new source of PHC data for research. However, care in the use of EMR data is required. Four years ago, researchers at the Centre for Studies in Family Medicine, The University of Western Ontario created an EMR-based research project, called Deliver Primary Health Care Information. Implementing this project led us to two conclusions about using PHC EMR data for research: first, additional time is required for providers to undertake EMR training and to standardize the way data are entered into the EMR and second, EMRs are designed for clinical care, not research. Based on these experiences, we offer our thoughts about how EMRs may, nonetheless, be used for research. Family physician researchers who intend to use EMR data to answer timely questions relevant to practice should evaluate the possible impact of the four questions raised by this paper: (i) why are EMR data different?; (ii) how do you extract data from an EMR?; (iii) where are the data stored? and (iv) what is the data quality? In addition, consideration needs to be given to the complexity of the research question since this can have an impact on how easily issues of using EMR data for research can be overcome.

Accumulation of nutrients in soils affected by perennial colonies of piscivorous birds with reference to biogeochemical cycles of elements.

[Overview of percutaneous ablation therapy].

Effects of Incorporation of Nano-Fluorapatite or Nano-Fluorohydroxyapatite on a Resin-Modified Glass Ionomer Cement

Synthesis and Characterization of an Anti-Caries and Remineralizing Fluorine-Containing Cationic Polymer PHMB-F.

Novel Nano Calcium Fluoride Remineralizing and Antibacterial Dental Composites

Novel CaF2 Nanocomposites with Antibacterial Function and Fluoride and Calcium Ion Release to Inhibit Oral Biofilm and Protect Teeth

Evaluation of remineralization potential and mechanical properties of pit and fissure sealants fortified with nano-hydroxyapatite and nano-amorphous calcium phosphate fillers: An in vitro study

Development of Novel Polymerizable Antibacterial Monomer and Its Antibacterial Effects on Dental Adhesive

Effect of an Antibacterial Monomer on the Antibacterial Activity of a Pit-and-Fissure Sealant.

A fluoride rechargeable resin adhesive with long-term antibacterial effect for improved dental treatment

Kidney function during and after withdrawal of long-term irbesartan treatment in patients with type 2 diabetes and microalbuminuria.

Ethanol and signal transduction in the liver

Physical–Mechanical Properties and Mineral Deposition of a Pit-and-Fissure Sealant Containing Niobium–Fluoride Nanoparticles—An In Vitro Study

Fluorinated Montmorillonite and 3YSZ as the Inorganic Fillers in Fluoride-Releasing and Rechargeable Dental Composition Resin

"Normal" values for African patients.

Novel antibacterial dental resin containing silanized hydroxyapatite nanofibers with remineralization capability

Improving antibacterial performance of dental resin adhesive via co-incorporating fluoride and quaternary ammonium

A Multifunctional Dental Resin Composite with Sr-N-Doped TiO2 and n-HA Fillers for Antibacterial and Mineralization Effects

Study on the mechanical and aging properties of an antibacterial composite resin loaded with fluoride-doped nano-zirconia fillers

Spray-drying-assisted fabrication of CaF2/SiO2 nanoclusters for dental restorative composites

Using your electronic medical record for research: a primer for avoiding pitfalls.