Abstract:Lithium-ion batteries (LIBs) are critically important rechargeable energy storage devices, finding widespread application in consumer electronics and electric vehicles. However, safety issues associated with their flammability impede their development for many applications. As a fully solid-state device, the thin film battery (TFB) is a compelling candidate for advanced microscale applications, including wearable devices, smart ID cards, and microelectromechanical systems (MEMS). A typical TFB design consists of solid thin films of crystalline cathode, amorphous LiPON electrolyte, Li metal anode and current collectors supported on a rigid substrate. Polycrystalline cathodes are often employed, such as LiCoO 2 , Li 2 Mn 2 O 4 , LiNiO 2 , V 2 O 5 , etc., because they provide high specific capacity and good reversibility. However, these cathodes require thermal treatment to generate the crystalline microstructure for optimal electrochemical performance, demanding substrates that are stable to several hundreds of degrees Celsius. The industry is interested in lower-cost, flexible all-solid-state thin-film batteries that can be readily integrated into a wide range of applications, including wearable devices. Thus, there is strong demand for thin film cathodes that can be processed at low temperatures. Herein, we report a new amorphous inorganic thin-film cathode material, which is a solid state composite of Li 2 RuO 3 and LiCoO 2 . (LRCO). Without any post-deposition annealing steps, as-deposited LRCO thin films possess a high discharge capacity of over 110 μAh cm -2 μm -1 at 0.3 C and capacity retention over 92% after 150 cycles owing to both cationic and anionic (oxygen oxidation) redox processes, which is competitive with conventional polycrystalline thin-film cathodes. The surface of LRCO cathode is smooth and isotropic, leading to uniform Li ion transport and thereby reducing the possibility of short-circuiting. More importantly, the entire preparation process is conducted at room temperature, enabling wider substrate options for TFBs, such as Kapton ® films, polyethylene terephthalate (PET) films, or even paper sheets. Using PET plastic sheets to support LRCO TFBs; a specific capacity of 101 μAh cm -2 μm -1 at 0.3 C and capacity retention of 97.5% after 120 cycles was achieved, even when the substrate was mechanically bent (flexed).

High-Voltage All-Solid-State Thin-Film Lithium Batteries Enabled by LiF Interlayer

Vanadium pentoxide interfacial layer enables high performance all-solid-state thin film batteries

Self-Standing 3D Cathodes for All-Solid-State Thin Film Lithium Batteries with Improved Interface Kinetics

An in-situ polymerized interphase engineering for high-voltage all-solid-state lithium-metal batteries

Tunnel Intergrowth LixMnO2 Nanosheet Arrays As 3D Cathode for High‐Performance All‐Solid‐State Thin Film Lithium Microbatteries

In-situ formed decrystallized interphase enabled high performance all-in-one all-solid-state batteries

In Situ construction of PVDF/LLTO electrolyte with stable electrolyte/electrode interphase for integrated solid-state lithium batteries

Artificial Interlayer and Special Electrode Structure Design in a Solid-State Battery to Homogenize Li-Ion Transport

Insights into the Enhanced Interfacial Stability Enabled by Electronic Conductor Layers in Solid‐State Li Batteries

A sequential thin-film deposition equipment for in-situ fabricating all-solid-state thin film lithium batteries

Anion-Mediated Interphase Construction Enabling High-Voltage Solid-State Lithium Metal Batteries

Tunnel Intergrowth Li x MnO 2 Nanosheet Arrays as 3D Cathode for High‐Performance All‐Solid‐State Thin Film Lithium Microbatteries

Achieving multi-dimensional Li + transport nanochannels via spatial-partitioning in crystalline ionic covalent organic frameworks for highly stable lithium metal anode

Guiding Uniformly Distributed Li–Ion Flux by Lithiophilic Covalent Organic Framework Interlayers for High-Performance Lithium Metal Anodes

Stable all-solid-state lithium metal batteries enabled by ultrathin LiF/Li3Sb hybrid interface layer

Constructing Robust LiF‐Enriched Interfaces in High‐Voltage Solid‐State Lithium Batteries Utilizing Tailored Oriented Ceramic Fiber Electrolytes

High-Capacity Cathodes for All-Solid-State Thin-Film Batteries

Interfacial study and modulation of high-voltage layered cathode based all-solid-state batteries

Smart construction of multifunctional Li1.5Al0.5Ge1.5(PO4)3|Li intermediate interfaces for solid-state batteries

LiF involved interphase layer enabling thousand cycles of LAGP-based solid-state Li metal batteries with 80% capacity retention

Integrated Design of a Functional Composite Electrolyte and Cathode for All-Solid-State Li Metal Batteries