Abstract:Cork materials have the property of elastic deformation under pressure due to their unique closed, porous, cell structure with thin cell wall; and they accordingly need a surface coating that matches their deformation during there being used as floor materials. However, traditional wood coatings are hard, brittle, and mostly suitable for stiff wood surfaces, which are difficult to be directly adapted to the requirements of flexible cork. Although waterborne polyurethane (WPU) has the advantage of property tailorability, its fully applicable to cork materials are still a challenge. Herein, this study utilized a simple physical blending of waterborne polyurethane and nanocellulose with high aspect ratio, to develop a high-strength coating that matches the elastic deformation requirements of cork materials. When both two kinds of nanocellulose, poplar wood nanocellulose (WCNF) with an aspect ratio of 800 and bacterial nanocellulose (BCNF) with an aspect ratio of 2000, was individually added into the WPU emulsion at 0.5 wt%, the tensile strength and elastic modulus of the nanocellulose-modified polyurethane coating increased by 48.58 % and 118.88 %, 54.50 % and 120.48 %, respectively, compared to those of the pure WPU coating (14.09 MPa and 312.74 MPa). It is notable that both the nanocellulose-modified coatings showed no signs of damage on the cork surface even they underwent continuous bending over 2000 cycles, which indicates their excellent flexural fatigue resistance. Interestingly, such nanocellulose-modified coatings maintain comparable transparency, gloss, adhesion, solvent resistance and even present slightly improved hardness and wear resistance than their pure WPU coatings. Overall, the two nanocelluloses are comparative to the modification of the coatings, both of which could match the elastic deformation requirements of cork materials. Therefore, the nanocellulose physically blended polyurethane technology provides a simple and effective solution for the design and property tailoring of flexible coatings for cork floor.

Biomimetic design of micro- and nano-wrinkle wood surface via coating reinforced with hyperbranched polymer grafted cellulose nanofibers for skin-tactile performance

Preparation of a self-matting, anti-fingerprint and skin-tactile wood coating via biomimetic self-wrinkling patterns

A novel self-wrinkled polyurethane-acrylate wood coating with self-matting, anti-fingerprint performance and skin-tactile feeling via excimer lamp/UV curing

Bio-based Wrinkled Surfaces Harnessed from Biological Design Principles of Wood and Peroxidase Activity

Construction of CNC@SiO2@PL Based Superhydrophobic Wood with Excellent Abrasion Resistance Based on Nanoindentation Analysis and Good UV Resistance

Precision Imprinted Nanostructural Wood.

Sustainable cellulose nanofiber/hydrophobic silica nanoparticle coatings with robust hydrophobic and water-resistant properties for wood substrates

Self-wrinkling coating for impact resistance and mechanical enhancement

UV-Assisted Multiscale Superhydrophobic Wood Resisting Surface Contamination and Failure

Towards high performance wood composites through interface customization with cellulose-based adhesive

Performance study of a superhydrophobic nanocellulose membrane on the surface of a wood-based panel prepared via the sol-gel method

Novel Low-Temperature Chemical Vapor Deposition of Hydrothermal Delignified Wood for Hydrophobic Property

Superhydrophobic elastomer with leaf-spring microstructure made from natural wood without any modification chemicals

Enhancement of mechanical and thermal properties of UV‐curable wood coatings by cellulose nanofibrils and carboxylated organo‐montmorillonite

Multiple regulation of dynamic wrinkles based on conjugated copolymer network

Fabrication of Mildew-Resistant Wood with Multi-Functional Properties Based on In Situ Growth of Metal–Organic Frameworks

Wrinkles with Changing Orientation and Complexity in a Single Piece of Thin Film

Using Nanoimprint Lithography to Create Robust, Buoyant, Superhydrophobic PVB/SiO2 Coatings on wood Surfaces Inspired by Red roses petal

Wood Cell Wall Nanoengineering toward Anisotropic, Strong, and Flexible Cellulosic Hydrogel Sensors

Imparting durable superhydrophobic/oleophobic properties to wood surfaces by means of PFDMS@MTCS vapor deposition

Nanocellulose-reinforced polyurethane as flexible coating for cork floor