Emergency nurses test NHS response to Ebola outbreak.

E. Dean

DOI: https://doi.org/10.7748/en.22.7.11.s11

2014-11-01

Emergency Nurse

Abstract:URGENT CARE staff should be aware that Ebola must be ruled out in all patients at their first point of contact in emergency departments (EDs), new guidance warns.

What problem does this paper attempt to address?

Degeneracy of T cell receptor recognition of an influenza virus hemagglutinin epitope restricted by HLA‐DQ and ‐DR class II molecules

Claerwen M. Jones,R. Lake,J. Lamb,A. Faith

DOI: https://doi.org/10.1002/eji.1830240519

1994-05-01

European Journal of Immunology

Abstract:The T cell receptor (TcR) recognizes antigens in the form of short peptide fragments bound to major histocompatibility (MHC) molecules. TcR have an immunoglobulin (Ig)‐like structure and, in an analogous manner to antigen recognition by Ig, the third complementarity determining regions (CDR3) of the TcR are believed to provide the primary contact with the peptide lying in the MHC groove. CDR1 and CDR2 are thought to contact the presenting MHC molecule. We have analyzed seven human CD4+ T cell clones that recognize a conserved peptide epitope (residues 255–270) within the influenza virus hemagglutinin (H3) HA1 subunit. Two T cell clones recognized the peptide in the context of HLA‐DRB1*1001 and HLA‐DQB1* 0602/DQA1*0102, respectively, and shared Vα, Vβ and Jβ gene segments. Only the junctional regions encoding the CDR3 regions of the two TcR chains were different. This suggests that the CDR3 regions of these TcR interact with the MHC class II molecule. Six of the T cell clones were restricted by the HLA‐DRB1*1001. Two of these T cell clones expressed Vβ9.1 and three expressed Vβ13 gene segments; the remaining clone expressed Vβ7.2, a close homologue of Vβ9.1. A diverse selection of Vα and J gene segments contributed to the junctional heterogeneity of the TcR, indicating a diversity of sequence combinations recognizing the epitope. Nevertheless, five out of six T cell clones bore a motif in the Vα CDR3 loop consisting of adjacent acidic and polar amino acid residues, eight residues from the carboxyl end of each CDR3.
Effects of Surface Defects on Performance and Dynamics of CsPbI 2 Br Perovskite: First-Principles Nonadiabatic Molecular Dynamics Simulations

Bao Liu,Zhaoxin Wang,Shuping Huang,Yulun Han,Dmitri S. Kilin

DOI: https://doi.org/10.1021/acs.jpclett.4c00675

IF: 6.888

2024-04-26

The Journal of Physical Chemistry Letters

Abstract:Inorganic mixed-halogen perovskites exhibit excellent photovoltaic properties and stability; yet, their photoelectric conversion efficiency is limited by inherent surface defects. In this work, we study the impact of defects on properties of CsPbI(2)Br slabs using first-principles calculations, focusing on specific defects such as I vacancy (V(I)), I interposition (I(i)), and I substitution by Pb (Pb(I)). Our findings reveal that these defects affect the geometric and optoelectronic properties...

chemistry, physical,physics, atomic, molecular & chemical,nanoscience & nanotechnology,materials science, multidisciplinary
Tracing Ion Migration in Halide Perovskites with Machine Learned Force Fields

Viren Tyagi,Mike Pols,Geert Brocks,Shuxia Tao

2024-09-24

Abstract:Halide perovskite optoelectronic devices suffer from chemical degradation and current- voltage hysteresis induced by migration of highly mobile charged defects. Atomic scale molecular dynamics simulations can capture the motion of these ionic defects, but classical force fields are too inflexible to describe their dynamical charge states. Using CsPbI3 as a case study, we develop machine learned force fields from density functional theory calculations and study the diffusion of charged halide interstitial and vacancy defects in bulk CsPbI3. We find that negative iodide interstitials and positive iodide vacancies, the most stable charge states for their respective defect type, migrate at sim- ilar rates at room temperature. Neutral interstitials are faster, but neutral vacancies are one order of magnitude slower. Oppositely charged interstitials and vacancies, as they can occur in device operation or reverse bias conditions, are significantly slower and can be considered relatively immobile.

Materials Science
Intrinsic Charged Defects and Lithium-Ion Transport Mechanisms in CdPS3

Wenqi Xiong,Qi Yao,Shengjun Yuan

DOI: https://doi.org/10.1103/physrevapplied.21.044011

IF: 4.6

2024-01-01

Physical Review Applied

Abstract:Recent studies have unveiled that the electronically insulating CdPS3 can serve as a versatile solid ion conductor, exhibiting exceptionally high conductivity at room temperature towards various cations. Cd vacancies are believed to play a crucial role in achieving high ionic conductivity, but their specific assisting mechanisms remain unknown. Here, we investigated the synergistic mechanism of Cd-vacancy and Li-ion intercalation using first-principles calculations based on density-functional theory. We found that under a Cd- or P-poor chemical potential, as the Fermi energy approaches the conduction band of CdPS3, the formation of Cd vacancies with the -1 charge state V-Cd is energetically favored. The reason for achieving high electrical conductivity is the introduction of a high density of Li ions into Cd vacancies. Keeping the concentration (x) of Cd vacancies below 0.5 in Cd1-xPS3Li2xis crucial to ensure high Li-ion conductivity, as concentrations above this threshold lead to a loss of long-range thermal stability and increased energy barriers that impede the diffusion of Li ions. In particular, the Li-ion diffusion barrier in Cd0.833PS3Li0.333 is determined to be 0.2 eV, which is highly consistent with the experimental value of 0.21 +/- 0.022 eV. Further analysis revealed that Li ions on the surface show a preference for moving along the Cd or S atoms rather than the P atoms. Our research provides insights into the role of vacancies in facilitating cation diffusion, establishing a theoretical framework for the design of high-ionic-conductivity materials.
In reply: alcohol and pregnancy.

A. Mukherjee,G. Hodgen

DOI: https://doi.org/10.1126/SCIENCE.221.4617.1246-A

IF: 56.9

1983-09-23

Science

Abstract:
Requirement of thiols for activation of coronary arterial guanylate cyclase by glyceryl trinitrate and sodium nitrite: possible involvement of S-nitrosothiols.

L. J. Ignarro,Carl S. Gruetter

DOI: https://doi.org/10.1016/0304-4165(80)90297-4

1980-08-13

Biochimica et Biophysica Acta

Abstract:
Defect-Triggered Phase Transition in Cesium Lead Halide Perovskite Nanocrystals

Ju-Ping Ma,Jun Yin,Ya-Meng Chen,Qing Zhao,Yang Zhou,Hong Li,Yoshihiro Kuroiwa,Chikako Moriyoshi,Zhi-Yong Li,Osman M. Bakr,Omar F. Mohammed,Hong-Tao Sun

DOI: https://doi.org/10.1021/acsmaterialslett.9b00128

IF: 11.4

2019-01-01

ACS Materials Letters

Abstract:All-inorganic perovskite nanocrystals (NCs) have emerged as a class of low-cost and high-efficiency light-emitting materials. However, the structure and phase transition behavior of these NCs remain poorly understood. Here, we provide unambiguous evidence that all these properties are associated with structural defects in NCs. Using CsPbCl3 NCs as a model system, we find that the cubic subdomains in highly defective NCs gradually convert to the orthorhombic upon cooling room-temperature quasi-cubic NCs, whereas high-quality cousins, with mixed cubic and orthorhombic subdomains at room temperature, exhibit a significant resistance for such a phase transition. Car-Parrinello molecular dynamics simulations unveil the important role of point defects in triggering a stepwise, reversible phase transition of CsPbCl3 NCs. Importantly, we show that the defect-triggered phase transition also exists in other all-inorganic perovskite NCs. Our findings provide new insight into the structure and phase transition of CsPbX3 NCs and highlight the important role of defects in impacting these properties.
Dynamics of Bound Exciton Complexes in CdS Nanobelts.

Xinlong Xu,Yanyuan Zhao,Edbert Jarvis Sie,Yunhao Lu,Bo Liu,Sandy Adhitia Ekahana,Xiao Ju,Qike Jiang,Jianbo Wang,Handong Sun,Tze Chien Sum,Cheng Hon Alfred Huan,Yuan Ping Feng,Qihua Xiong

DOI: https://doi.org/10.1021/nn2008832

IF: 17.1

2011-01-01

ACS Nano

Abstract:Intrinsic defects such as vacancies, interstitials, and anti-sites often introduce rich luminescent properties in II-VI semiconductor nanomaterials. A clear understanding of the dynamics of the defect-related excitons is particularly important for the design and optimization of nanoscale optoelectronic devices. In this paper, low-temperature steady-state and time-resolved photoluminescence (PL) spectroscopies have been carried out to investigate the emission of cadmium sulfide (CdS) nanobelts that originates from the radiative recombination of excitons bound to neutral donors (I(2)) and the spatially localized donor-acceptor pairs (DAP), in which the assignment is supported by first principle calculations. Our results verify that the shallow donors in CdS are contributed by sulfur vacancies while the acceptors are contributed by cadmium vacancies. At high excitation intensities, the DAP emission saturates and the PL is dominated by I(2) emission. Beyond a threshold power of approximately 5 μW, amplified spontaneous emission (ASE) of I(2) occurs. Further analysis shows that these intrinsic defects created long-lived (spin triplet) DAP trap states due to spin-polarized Cd vacancies which become saturated at intense carrier excitations.
Defect formation in CsSnI$_3$ from Density Functional Theory and Machine Learning

Chadawan Khamdang,Mengen Wang

2024-11-12

Abstract:Sn-based perovskites as low-toxic materials are actively studied for optoelectronic applications. However, their performance is limited by $p$-type self-doping, which can be suppressed by substitutional doping on the cation sites. In this study, we combine density functional theory (DFT) calculations with machine learning (ML) to develop a predictive model and identify the key descriptors affecting formation energy and charge transition levels of the substitutional dopants in CsSnI$_{3}$. Our DFT calculations create a dataset of formation energies and charge transition levels and show that Y, Sc, Al, Nb, Ba, and Sr are effective dopants that pin the fermi level higher in the band gap, suppressing the $p$-type self-doping. We explore ML algorithms and propose training the random forest regression model to predict the defect formation properties. This work shows the predictive capability of combining DFT with machine learning and provides insights into the important features that determine the defect formation energetics.

Materials Science
Interstitals as non-radiative recombination centers for all-inorganic halide perovskites

Yijun Tong,Xiaofeng Xiang,Scott Dunham

DOI: https://doi.org/10.1016/j.commatsci.2024.113384

IF: 3.572

2024-09-26

Computational Materials Science

Abstract:Inorganic halide perovskites have been considered as higher-stability alternatives to hybrid halide perovskites for optoelectronic applications. However, the formation of defects in these materials can significantly affect carrier density and recombination lifetime. Thus, understanding their properties is of great importance for achieving improved device performance. Through GGA+U calculations with spin–orbital coupling, we calculate the properties of native defects in CsPbI 3 /CsSnI 3 and the defect-assisted non-radiative recombination rates for selected deep levels. Importantly, we discover that the iodine interstitials in CsPbI 3 and tin interstitials in CsSnI 3 have high non-radiative carrier capture rates. Besides, we also notice that complete defect structural relaxations are only achievable when large supercells are used. This work not only provides insights into potential non-radiative recombination pathways due to the formation of corresponding interstitials, but also highlights the importance of utilizing large supercells for defect calculations in perovskites.

materials science, multidisciplinary
Fluctuations at Metal Halide Perovskite Grain Boundaries Create Transient Trap States: Machine Learning Assisted Ab Initio Analysis

Yifan Wu,Dongyu Liu,Weibin Chu,Bipeng Wang,Andrey S Vasenko,Oleg V Prezhdo

DOI: https://doi.org/10.1021/acsami.2c16203

2022-12-21

Abstract:All-inorganic perovskites are promising candidates for solar energy and optoelectronic applications, despite their polycrystalline nature with a large density of grain boundaries (GBs) due to facile solution-processed fabrication. GBs exhibit complex atomistic structures undergoing slow rearrangements. By studying evolution of the Σ5(210) CsPbBr3 GB on a nanosecond time scale, comparable to charge carrier lifetimes, we demonstrate that GB deformations appear every ∼100 ps and increase significantly the probability of deep charge traps. However, the deep traps form only transiently for a few hundred femtoseconds. In contrast, shallow traps appear continuously at the GB. Shallow traps are localized in the GB layer, while deep traps are in a sublayer, which is still distorted from the pristine structure and can be jammed in unfavorable conformations. The GB electronic properties correlate with bond angles, with notable exception of the Br-Br distance, which provides a signature of halide migration along GBs. The transient nature of trap states and localization of electrons and holes at different parts of GBs indicate that charge carrier lifetimes should be long. At the same time, charge mobility can be reduced. The complex, multiscale evolution of geometric and electronic structures of GBs rationalize the contradictory statements made in the literature regarding both benign and detrimental roles of GBs in perovskite performance and provide new atomistic insights into perovskite properties.
Mitigating deep-level defects through a self-healing process for highly efficient wide-bandgap inorganic CsPbI3-xBrx perovskite photovoltaics

Jun Liu,Ming Wang,Jinhong Lin,Guojie Chen,Baoxing Liu,Jincheng Huang,Meng Zhang,Guangxing Liang,Lei Lu,Ping Xu,Bingbing Tian,Hoi-Sing Kwok,Guijun Li,Guang-xing Liang,Hoi Sing Kwok,Guijun LI

DOI: https://doi.org/10.1039/d2ta02022j

IF: 11.9

2022-07-25

Journal of Materials Chemistry A

Abstract:Wide bandgap inorganic perovskites have attracted intensive attention owing to their potential applications in high-efficiency tandem solar cells and indoor photovoltaics. However, the performance of wide bandgap inorganic perovskite solar cells (PSCs) suffers from large energy loss due to a high degree of atom (or lattice) disorder and trap defects induced by the phase transformation. Herein, the defect states of the 1.82 eV inorganic CsPbI3-xBrx perovskite are investigated by thermal admittance spectroscopy, photoluminescence spectra, transient photovoltage, and space-charge-limited current measurement. It is found that the deep-level interstitial defects with an activation energy of 321 meV can be reduced by two orders of magnitude under prolonged storage in a low-humidity ambient condition. The admittance spectroscopy at low-fequency region also reveals the evolution of the activation energy for ion migration. The self-healing process, which is assisted by the ion migration, is proposed to explain the mitigation of the deep-level interstitial defects. Device characterization and drift-diffusion model-based simulation further elucidate the reduction of the nonradiative Shockley−Read−Hall recombination and the enhancement of the carrier extraction, both attributed to the mitigation of the trap defects. This work highlights the critical roles of the self-healing process in diminishing the deep-level interstitial defects for high-performance inorganic perovskite optoelectronics.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Kinetic Process with Anti-Frenkel Disorder in a CsPbI3 Perovskite

Taoyuze Lv,Yuhang Liang,Fang Zeng,Feng Li,Xudong Yang,Jun Huang,Rongkun Zheng

DOI: https://doi.org/10.1021/acs.jpclett.3c03473

2024-03-14

Abstract:Halide perovskites are rich in ionic diffusion phenomena due to their low activation energy. The soft lead iodide lattice can, in theory, endow the system with more complex defect collaborative motions. In this work, we systematically investigated the hopping mechanics of iodide interstitials with respect to various defect behaviors, such as anti-Frenkel disorder creation and annihilation. We found that the existence of iodide vacancies and interstitials can effectively lower the creation barrier of additional anti-Frenkel disorder in the halide perovskite. The free energy barriers for generating additional Frenkel defect pairs vary from 0.25 to 0.43 eV, in the proximity of those of the original iodide defects at 300 K. This finding suggests that the spontaneous creation of a specific level of anti-Frenkel disorder facilitates long-range annihilation and defect hopping processes.
Inhomogeneous Defect Distribution in Mixed-Polytype Metal Halide Perovskites

Young Won Woo,Zhenzhu Li,Young-Kwang Jung,Ji-Sang Park,Aron Walsh

DOI: https://doi.org/10.48550/arXiv.2211.00956

2022-11-02

Abstract:The competition between corner, edge and face-sharing octahedral networks is a cause of phase inhomogeneity in metal halide perovskite thin-films. Here we probe the charged iodine vacancy distribution and transport at the junction between cubic and hexagonal polytypes of CsPbI$_3$ from first-principles materials modelling. We predict a lower defect formation energy in the face-sharing regions, which correlates with a longer Pb$-$I bond length and causes a million-fold increase in local defect concentration. These defects are predicted to be more mobile in the face-sharing regions with a reduced activation energy for vacancy-mediated diffusion. We conclude that hexagonal phase inclusions or interfaces will act as defect sinks that could trap charges and enhance current-voltage hysteresis in perovskite-based solar cells and electrical devices.

Materials Science
Dynamic Local Structure in Caesium Lead Iodide: Spatial Correlation and Transient Domains

William Baldwin,Xia Liang,Johan Klarbring,Milos Dubajic,David Dell'Angelo,Christopher Sutton,Claudia Caddeo,Samuel D. Stranks,Alessandro Mattoni,Aron Walsh,Gábor Csányi

2023-04-11

Abstract:Metal halide perovskites are multifunctional semiconductors with tunable structures and properties. They are highly dynamic crystals with complex octahedral tilting patterns and strongly anharmonic atomic behaviour. In the higher temperature, higher symmetry phases of these materials, several complex structural features have been observed. The local structure can differ greatly from the average structure and there is evidence that dynamic two-dimensional structures of correlated octahedral motion form. An understanding of the underlying complex atomistic dynamics is, however, still lacking. In this work, the local structure of the inorganic perovskite CsPbI$_3$ is investigated using a new machine learning force field based on the atomic cluster expansion framework. Through analysis of the temporal and spatial correlation observed during large-scale simulations, we reveal that the low frequency motion of octahedral tilts implies a double-well effective potential landscape, even well into the cubic phase. Moreover, dynamic local regions of lower symmetry are present within both higher symmetry phases. These regions are planar and we report the length and timescales of the motion. Finally, we investigate and visualise the spatial arrangement of these features and their interactions, providing a comprehensive picture of local structure in the higher symmetry phases.

Materials Science
The Role of Surface Defects in Photoluminescence and Decay Dynamics of High-Quality Perovskite MAPbI3 Single Crystals.

Jie Ding,Zhipeng Lian,Yu Li,Shufeng Wang,Qingfeng Yan

DOI: https://doi.org/10.1021/acs.jpclett.8b01898

2018-01-01

Abstract:Halide perovskites have recently been a star semiconductor material in photovoltaic field owing to their excellent optoelectronic properties. An in-depth understanding of the photoluminescence and carrier diffusion in these materials may facilitate the implementation of high-performance optolelctronic devices. Here, we report an unusual photoluminescence quenching phenomenon in MAPbI3 single crystals. Interestingly, MAPbI3 single crystal with higher crystalline quality shows a lower photoluminescence emission and a shorter decay time, indicating the surface imperfection plays an important role to the photoluminescence. The quick quenching process is attributed to the synergistic effect of localized effect at the defects and rapid inward diffusion.
Modulation of Point Defect Properties Near Surfaces in Metal Halide Perovskites

Bilal Ahmad,Md Salman Rabbi Limon,Zeeshan Ahmad

2024-07-02

Abstract:It is now widely recognized that surface and interfacial defects exhibit distinct behavior compared to bulk defects in metal halide perovskites. However, the transition from bulk to surface behavior and the spatial extent of the surface's influence are not well understood. To address this, we conducted first-principles calculations on iodine vacancies and interstitial defects in methylammonium lead iodide and cesium lead iodide at various depths from the surface, enabling us to map out depth-dependent behavior. We find that the defect formation energy follows a saturating exponential curve as the defect moves away from the surface to the bulk. Using first-principles calculated defect formation energies, we quantify the extent of the surface's influence by calculating the decay length associated with each defect. The difference between the surface and bulk defect formation energy is found to be as high as 1.12 eV for the negatively charged iodine vacancy in methylammonium lead iodide, leading to the enrichment of the surface with defects. Through analysis of defective structures, we find that the differences in the bulk and surface defect properties are a consequence of different bond lengths and in some cases, even changes in bonding and coordination environments. Finally, we determine how the defect transition levels change as a function of the layer index, which could contribute to increased non-radiative recombination. Our findings pave the way for a systematic treatment of non-radiative losses in perovskite solar cells that incorporate spatially dependent defect densities and transition levels.

Materials Science,Chemical Physics
Atomistic insights into the degradation of halide perovskites: a reactive force field molecular dynamics study

Mike Pols,José Manuel Vicent-Luna,Ivo Filot,Adri C.T. van Duin,Shuxia Tao

DOI: https://doi.org/10.1021/acs.jpclett.1c01192

2021-04-04

Abstract:Halide perovskites make efficient solar cells due to their exceptional optoelectronic properties, but suffer from several stability issues. The characterization of the degradation processes is challenging because of the limitations in the spatio-temporal resolution in experiments and the absence of efficient computational methods to study the reactive processes. Here, we present the first effort in developing reactive force fields for large scale molecular dynamics simulations of the phase instability and the defect-induced degradation reactions in inorganic CsPbI$_{3}$. We find that the phase transitions are driven by a combination of the anharmonicity of the perovskite lattice with the thermal entropy. At relatively low temperatures, the Cs cations tend to move away from the preferential positions with good contacts with the surrounding metal halide framework, potentially causing its conversion to a non-perovskite phase. Our simulations of defective structures reveal that, although both iodine vacancies and interstitials are very mobile in the perovskite lattice, the vacancies have a detrimental effect on the stability, initiating the decomposition reactions of perovskites to PbI$_{2}$. Our work puts ReaxFF forward as an effective computational framework to study reactive processes in halide perovskites.

Materials Science
Steric engineering of point defects in lead halide perovskites

Lucy D. Whalley

2023-05-20

Abstract:Due to their high photovoltaic efficiency and low-cost synthesis, lead halide perovskites have attracted wide interest for application in new solar cell technologies. The most stable and efficient ABX$_3$ perovskite solar cells employ mixed A-site cations, however the impact of cation mixing on carrier trapping and recombination -- key processes that limit photovoltaic performance -- is not fully understood. Here we analyse non-radiative carrier trapping in the mixed A-cation hybrid halide perovskite MA$_{1-x}$Cs$_x$PbI$_3$. By using rigorous first-principles simulations we show that cation mixing leads to a hole trapping rate at the iodine interstitial that is eight orders of magnitude greater than in the single cation system. We demonstrate that the same defect in the same material can display a wide variety of defect activity -- from electrically inactive to recombination centre -- and, in doing so, resolve conflicting reports in the literature. Finally, we propose a new mechanism in which steric effects can be used to determine the rate of carrier trapping; this is achieved by controlling the phase and dynamical response of the lattice through the A-site composition. Our findings elucidate crucial links between chemical composition, defect activity and optoelectronic performance, and suggest a general approach that can help to rationalise the development of new crystalline materials with target defect properties.

Physics
Effect of cation vacancy on lattice and luminescence properties in CsPbBr3 quantum dots

Hao Wu,Jiacheng Pi,Dacheng Zhou,Qi Wang,Zhangwen Long,Jianbei Qiu

DOI: https://doi.org/10.1016/j.ceramint.2021.10.114

IF: 5.532

2022-02-01

Ceramics International

Abstract:All-inorganic perovskite quantum dots have been widely used in solar cells, LED, laser and scintillator in recent years. However, the essence of ion migration in perovskite lattice can cause the ion vacancies exist, which can directly affect the luminescence process. Herein, we focus on the effect of monovalent cation vacancies on the CsPbBr3 lattice, and realize the adjusting lattice structure of the CsPbBr3 QDs to change the luminescence lifetime by controlling the formation of monovalent cation vacancies. The results show that the existence of monovalent cation vacancies can be controlled by controlling dosages of Cs + precursor and can make the CsPbBr3 lattice produce local lattice micro distortion and reduce luminescence lifetime, which is beneficial to realize the rapid and efficient X-ray imaging of scintillating crystals. Experimental result is also verified by density functional theory (DFT).

materials science, ceramics

Emergency nurses test NHS response to Ebola outbreak.

Degeneracy of T cell receptor recognition of an influenza virus hemagglutinin epitope restricted by HLA‐DQ and ‐DR class II molecules

Effects of Surface Defects on Performance and Dynamics of CsPbI 2 Br Perovskite: First-Principles Nonadiabatic Molecular Dynamics Simulations

Tracing Ion Migration in Halide Perovskites with Machine Learned Force Fields

Intrinsic Charged Defects and Lithium-Ion Transport Mechanisms in CdPS3

In reply: alcohol and pregnancy.

Requirement of thiols for activation of coronary arterial guanylate cyclase by glyceryl trinitrate and sodium nitrite: possible involvement of S-nitrosothiols.

Defect-Triggered Phase Transition in Cesium Lead Halide Perovskite Nanocrystals

Dynamics of Bound Exciton Complexes in CdS Nanobelts.

Defect formation in CsSnI$_3$ from Density Functional Theory and Machine Learning

Interstitals as non-radiative recombination centers for all-inorganic halide perovskites

Fluctuations at Metal Halide Perovskite Grain Boundaries Create Transient Trap States: Machine Learning Assisted Ab Initio Analysis

Mitigating deep-level defects through a self-healing process for highly efficient wide-bandgap inorganic CsPbI3-xBrx perovskite photovoltaics

Kinetic Process with Anti-Frenkel Disorder in a CsPbI3 Perovskite

Inhomogeneous Defect Distribution in Mixed-Polytype Metal Halide Perovskites

Dynamic Local Structure in Caesium Lead Iodide: Spatial Correlation and Transient Domains

The Role of Surface Defects in Photoluminescence and Decay Dynamics of High-Quality Perovskite MAPbI3 Single Crystals.

Modulation of Point Defect Properties Near Surfaces in Metal Halide Perovskites

Atomistic insights into the degradation of halide perovskites: a reactive force field molecular dynamics study

Steric engineering of point defects in lead halide perovskites

Effect of cation vacancy on lattice and luminescence properties in CsPbBr3 quantum dots