Abstract:Robotic prostheses have the potential to significantly improve mobility for people with lower-limb amputation. Humans exhibit complex responses to mechanical interactions with these devices, however, and computational models are not yet able to predict such responses meaningfully. Experiments therefore play a critical role in development, but have been limited by the use of product-like prototypes, each requiring years of development and specialized for a narrow range of functions. Here we describe a robotic ankle-foot prosthesis system that enables rapid exploration of a wide range of dynamical behaviors in experiments with human subjects. This emulator comprises powerful off-board motor and control hardware, a flexible Bowden cable tether, and a lightweight instrumented prosthesis, resulting in a combination of low mass worn by the human (0.96 kg) and high mechatronic performance compared to prior platforms. Benchtop tests demonstrated closed-loop torque bandwidth of 17 Hz, peak torque of 175 Nm, and peak power of 1.0 kW. Tests with an anthropomorphic pendulum "leg" demonstrated low interference from the tether, less than 1 Nm about the hip. This combination of low worn mass, high bandwidth, high torque, and unrestricted movement makes the platform exceptionally versatile. To demonstrate suitability for human experiments, we performed preliminary tests in which a subject with unilateral transtibial amputation walked on a treadmill at 1.25 ms-1 while the prosthesis behaved in various ways. These tests revealed low torque tracking error (RMS error of 2.8 Nm) and the capacity to systematically vary work production or absorption across a broad range (from -5 to 21 J per step). These results support the use of robotic emulators during early stage assessment of proposed device functionalities and for scientific study of fundamental aspects of human-robot interaction. The design of simple, alternate end-effectors would enable studies at other joints or with additional degrees of freedom.

Dichloroacetic acid and trichloroacetic acid increase chloroform toxicity.

A Sagittal Planar Ankle-Foot Prosthesis with Powered Plantarflexion and Socket Alignment

On the Design of a Powered Transtibial Prosthesis with Stiffness Adaptable Ankle and Toe Joints.

PANTOE 1: Biomechanical Design of Powered Ankle-Foot Prosthesis with Compliant Joints and Segmented Foot

Design and preliminary verification of a novel powered ankle-foot prosthesis: From the perspective of lower-limb biomechanics compared with ESAR foot

DEVELOPMENT OF BIOMIMETIC POWERED ANKLE-FOOT PROSTHESIS WITH COMPLIANT JOINTS AND SEGMENTED FOOT

A Lightweight Powered Knee Prosthesis Replicating Early-Stance Knee Flexion During Level Walking

Design, development, and clinical validation of a two degrees of freedom compliant ankle-foot prosthesis based on a 4-4r parallel mechanism

Walking Ankle Biomechanics of Individuals With Transtibial Amputations Using a Prescribed Prosthesis and a Portable Bionic Prosthesis Under Myoelectric Control

Powered knee and ankle prosthesis with indirect volitional swing control enables level-ground walking and crossing over obstacles

Sialic acid content of ruminant blood serum.

A universal ankle-foot prosthesis emulator for human locomotion experiments

Toward Controlling Transtibial Prostheses Using a Single Degree of Freedom Inertial Sensor System

Design and Preliminary Results of a Reaction Force Series Elastic Actuator for Bionic Knee and Ankle Prostheses

Transforming the Anthropomorphic Passive Free-Flow Foot Prosthesis Into a Powered Foot Prosthesis With Intuitive Control and Sensation (Bionic FFF)

Intelligent ankle–foot prosthesis based on human structure and motion bionics

Emulating Human Kinematic Behavior on Lower-Limb Prostheses via Multi-Contact Models and Force-Based Nonlinear Control

Evaluation of experimental spinal cord injury using cortical evoked potentials.

Book Review: Sexual Violence on Campus: Policies, Programs and Perspectives.Edited by Allen J. Ottens and Kathy Hotelling. New York: Springer Publishing Company, Inc., 2001, 305 pp. (hardcover)

Evaluation of the Working Mechanism of a Newly Developed Powered Ankle–Foot Orthosis

A Phase Variable Approach for Improved Rhythmic and Non-Rhythmic Control of a Powered Knee-Ankle Prosthesis