THE “TYROSINASE REACTION” OF THE ACTINOMYCETES

C. Skinner

DOI: https://doi.org/10.1128/jb.35.4.415-424.1938

IF: 3.2

1938-04-01

Journal of Bacteriology

Abstract:

What problem does this paper attempt to address?

Distillation of Alcohol/water Solution in Hybrid Metal–organic Framework Hollow Fibers

Pengcheng Su,Xu Zhang,Yang Li,Haofeng Chen,Qin Meng,Guoliang Zhang

DOI: https://doi.org/10.1002/aic.16693

IF: 4.167

2019-01-01

AIChE Journal

Abstract:Distillation with multitudinous structured packings has shown great potential for chemical separation. However, there still remains a big challenge to prepare porous structured packings with more productive separation and better mass transfer efficiency due to materials limitations. Metal-organic framework (MOF) membranes have commendable porous structures that provide enough pathways for fast mass transport and superhydrophobic character for efficient separation. Herein, novel MOFs-based hollow fiber structured packings were fabricated by a facile two-step blending and post-coating method and successfully applied in alcohol/water distillation. The ZIF-8 nanoparticles with high surface area and hydrophobic framework in PDMS matrix greatly accelerated mass transfer rate of membrane. Especially, as hydrophobic ZIF-8/PDMS layer was coated on the inner surface of fibers, the wetting behavior of membranes can be effectively prevented. The prepared ZIF-8/PDMS structured packings can be easily operated far above the normal flooding limit and held the height of mass transfer unit as small as desired.
Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

Yang Li,Xu Zhang,Xuan Chen,Kaijie Tang,Qin Meng,Chong Shen,Guoliang Zhang

DOI: https://doi.org/10.1021/acsami.8b20422

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Poly(vinyl alcohol)-sodium alginate composite hydrogels were first introduced to synthesize robust and well-intergrown zeolite imidazolate framework (ZIF)/polymer hollow fiber membranes. Through enough adsorption interaction with metal ions by chelation, sufficient nucleation sites for in situ metal-organic framework (MOF) preparation are provided. Using this method, we can not only easily prepare defect-free MOF membranes ignoring the complex modification process and seed deposition but also structurally fix crystalline MOF layers and greatly improve the stiffness and durability of MOF composite membranes. The strategy also gives the appropriate level of generality for synthesis of versatile dense MOF membranes on a variety of polymeric supports. The fabricated ZIF-8/polyethersulfone membrane presented remarkable gas separation performance with H2 permeance of as high as 9.66 × 10-7 mol m-2 s-1 Pa-1 and a high H2/CO2 separation factor of up to 29.0.
[Erythrocyte deformability in microcytic hypochromic anemias].

A. Vayá,Y. Mira,M. Teruel,J. Aznar

Abstract:
Hydrophilic Hollow Zeolitic Imidazolate Framework-8 Modified Ultrafiltration Membranes with Significantly Enhanced Water Separation Properties

Huazhen Sun,Beibei Tang,Peiyi Wu

DOI: https://doi.org/10.1016/j.memsci.2018.01.053

IF: 9.5

2018-01-01

Journal of Membrane Science

Abstract:Metal-organic frameworks (MOFs) are being intensively investigated for the design of advanced composite membranes, primarily due to their favorable polymer affinity, and highly tunable porous structure and surface properties. However, the development of engineered MOF-based ultrafiltration (UF) membranes for water treatment remains in its infancy. In the present study, hydrophilic hollow zeolitic imidazolate framework-8 (hZIF-8) was meticulously synthesized via surface functionalization-assisted etching approach by using tannic acid (TA), and then incorporated into polysulfone (PSf) casting solution to fabricate novel hybrid UF membranes via phase inversion method. The resultant hZIF-8 not only possessed a highly hydrophilic surface derived from the coated TA but also yielded a unique hollow structure without destroying the intrinsic frameworks. Thanks to the well-tailored surface property and nanostructure of hZIF-8, the obtained PSf/hZIF hybrid UF membranes showed highly improved water permeation (597 Lm(-2) h(-1)), which was 2.8 times that of the pristine PSf membrane (210 Lm-2 h-1), while well maintaining the rejection property. What's more, the incorporation of hZIF-8 rendered the membrane with enhanced resistance to fouling. These results indicated the great application potential of such MOF/polymer hybrid UF membranes in wastewater treatment and separation in many industrial fields.
A novel water-stable two-dimensional zeolitic imidazolate frameworks thin-film composite membrane for enhancements in water permeability and nanofiltration performance

Ting Li,Yi Ren,Daowen Wu,Wenbin Zhang,Mengqi Shi,Chenghan Ji,Lu Lv,Ming Hua,Weiming Zhang

DOI: https://doi.org/10.1016/j.chemosphere.2020.127717

IF: 8.8

Chemosphere

Abstract:Polymer membranes for water treatment are constrained by the permeability-separation trade-off. Herein, two-dimensional (2D) zeolitic imidazolate frameworks (ZIFs) made of benzimidazole interconnected with Zn ions are used to create 2D Zn2(Bim)4 molecular sieve nanosheets, which is explored as an asymmetric, thin-film composite (TFC) nanofiltration (NF) membrane for removing organic dyes and salts from water with a high water permeability under a low operating pressure (1 bar). The 2D Zn2(Bim)4 TFC NF membrane is synthesized via ionic bonds between polycations and the peripheral hydroxy groups of 2D Zn2(Bim)4 nanosheets, regulating the assembly of 2D Zn2(Bim)4 to create a novel crack-free functional layer on top of a polyvinylidene fluoride (PVDF) ultrafiltration membrane. FESEM and XPS confirmed the presence of a polycations-regulated ultrathin functional layer with a thickness of ∼37 nm on the PVDF support. Benefiting from its structural feature, our 2D Zn2(Bim)4 TFC NF membrane could achieve an ultra-high flux of ∼290 L/(m2·h·bar) (5-10-fold higher than that of graphene-based membranes), good anti-fouling properties and high rejection rates (above 98%) for organic dyes. Moreover, the desalinization rate is 50-75%. That is, our membrane is endowed with NF capability, and its intrinsic ultrafiltration features (high water permeance, ultrafast, and energy-saving) are also well maintained.
Construction the hierarchical architecture of molybdenum disulfide/MOF composite membrane via electrostatic self-assembly strategy for efficient molecular separation

Si-Yuan Fang,Ji-Lai Gong,Lin Tang,Wei-Cheng Cao,Juan Li,Zi-Kang Tan,Qiu-Ya Niu,Zeng-Ping Chen

DOI: https://doi.org/10.1016/j.cej.2022.137808

IF: 15.1

2022-12-01

Chemical Engineering Journal

Abstract:Developing a novel nanofiltration membrane for effectively purifying antibiotic wastewater has been a daunting challenge in recent years. However, a convenient and controllable strategy for constructing membranes with two-dimensional nanomaterials (2DNMs) and metal–organic frameworks (MOFs) needs to be further studied. Herein, a loosely hierarchical architecture composite membrane has been fabricated, utilizing an electrostatic layer-by-layer (LBL) self-assembly method to intercalate chitosan crosslinked UiO-66-NH2 MOFs (CMOF) into MoS2 laminates. Through regulating the CMOF content, lower hydraulic-resisted channels and precise separation regions have been formed in the hierarchical architecture. The well-designed MoS2/CMOF composite membrane exhibited enhanced water permeance (78.98 ± 1.45 L·m-2h−1 bar−1) and superior antibiotic rejection capability (98.01 ± 1.12% for ciprofloxacin and 94.31 ± 0.68% for ofloxacin), which are increased by 27–55% more than monomer membranes. Detailed analysis results indicate the nanofiltration performance of the MoS2/CMOF composite membrane depends heavily on the synergistic mechanism, including the molecular sieving effect (size exclusion), electrostatic repulsion, and hydrophilic-hydrophobic interaction. Besides, the MoS2/CMOF composite membrane has emerged with excellent antifouling ability and long-term stability, which could maintain favorable rejection efficiency in continuous nanofiltration for 72 h under an alkaline and acidic environment. Furthermore, it presents over 90% antibiotic rejection rates for real water samples obtained from the municipal domestic sewage and livestock wastewater along the Xiangjiang River in China, indicating its good availability. In general, this work provides a new vision and a reasonable design strategy to construct 2DNMs/MOFs-based nanofiltration membranes with hierarchical architecture, further expanding their application in wastewater treatment and reclamation, in harmony with the global trend of green and low-carbon development.

engineering, chemical, environmental
Highly permeable and acid-resistant nanofiltration membrane fabricated by in-situ interlaced stacking of COF and polysulfonamide films

Wei Lai,Linglong Shan,Ju Bai,Luqi Xiao,Lu Liu,Shunli Wang,Lili Gong,Yang Jiao,Wei Xie,Hongyan Liu,Shuangjiang Luo,Suojiang Zhang

DOI: https://doi.org/10.1016/j.cej.2022.137965

IF: 15.1

2022-12-15

Chemical Engineering Journal

Abstract:The fabrication of nanofiltration (NF) membranes with excellent acid resistance and high separation performance remains a tremendous challenge due to the lack of precise membrane structure manipulation. Herein, covalent organic frameworks (COFs), due to their abundant porosity and highly ordered structures, are employed to synthesize high-permeation nanofiltration membranes. An acid-stable COF layer and a polysulfonamide (PSA) layer were fabricated by in-situ interfacial polymerization (IP) upon the polyethersulfone (PES) ultrafiltration substrate in turns. The acquired COF-based composite membrane exhibited sub-nanometer pore size and excellent rare-earth ions separation performance due to the interlaced stacking between the COF and PSA layers, as well as the COF interlayer regulated IP process. Additionally, the composite membrane showed high rejection of >92.2% for trivalent rare-earth ions (RE3+) and high water permeance of >43.3 L h−1 m−2 bar−1 at both pH = 6.8 and pH = 1, the superior separation performance can be ascribed to the high porosity and abundant transportation pathway provided by the COF layer and the interlaced stacking structure between the COF layer and the PSA layer. The facile membrane fabrication procedure, along with the excellent water permeation performance and acid resistance, render the composite membrane in this study applicable for a broad range of critical industrial and environmental processes.

engineering, chemical, environmental
Facile ZIF–8 nanocrystals interlayered solvent–resistant thin–film nanocomposite membranes for enhanced solvent permeance and rejection

Yayu Wei,Zhe Yang,Ling Wang,Yifei Yu,Hong Yang,Hua Jin,Peng Lu,Yi Wang,Dapeng Wu,Yanshuo Li,Chuyang Y. Tang

DOI: https://doi.org/10.1016/j.memsci.2021.119586

IF: 9.5

2021-10-01

Journal of Membrane Science

Abstract:<p>Introduction of nanomaterials into thin–film nanocomposite (TFN) membranes can improve the solvent permeance for organic solvent reverse (OSRO) and forward osmosis (OSFO) processes. However, the severe nanomaterials aggregation and the formation of defects in membrane rejection layer, which decreased the rejection of membrane against various solutes. Herein, we proposed a novel strategy of thin–film nanocomposite (TFNi) membrane featuring an interlayer of metal–organic framework (MOF, ZIF–8) by one–step fabrication in the simultaneous phase–inversion and crosslinking process. This strategy integrates the precipitation of polyimide (PI) substrates, crosslinking between the PI and hexanediamine, and generated ZIF–8 nanocrystals through the interfacial diffusion. Furthermore, one–step strategy of ZIF–8 effectively mitigate its agglomeration in the surface of support layers by SEM characterization. A prepared polyamide (PA) rejection layer with high crosslinking and low thickness was characterized by XPS and TEM. The resulting TFNi membranes with ZIF–8 interlayer (OSFOISG–2.5) showed a molecular weight cut–off of ∼500 Da, the remarkable DI water and THF permeances (9.73 and 1.62 L m–2 h–1 bar–1 under RO mode), and the higher ethanol fluxes (2.10 ± 0.11 LMH under FO mode and 2.97 ± 0.31 LMH under PRO mode). In addition, the solvents permeance of the OSFOISG–2.5 membrane was furtherly improved by 10 h DMF activation without loss of the polystyrene rejection in RO mode. This study also provides insight for the preparation of ZIF–8 on the polymer's matrix for large–scale production.</p>

engineering, chemical,polymer science
Designing heterogeneous MOF-on-MOF membrane with hierarchical pores for effective water treatment

Yinghui Xu,Xuan Zhao,Ran Chang,Hongqiang Qu,Jianzhong Xu,Jing Ma

DOI: https://doi.org/10.1016/j.memsci.2022.120737

IF: 9.5

2022-09-15

Journal of Membrane Science

Abstract:Rationally regulating the separation pores is an effective way to achieve efficient separation membrane. However, the developed metal-organic framework (MOF) membranes for water treatment are all formed by one kind of MOF, which can only provide rigid pores, makes it difficult to achieve high flux and excellent rejection ratio simultaneity. Here, we proposed a facile strategy for the synthesis of heterogeneous MOF-on-MOF membrane with hierarchical pores, by site-specific grown ZIF-8 layer on UiO-66-NH2 layer. Thus unique architecture of the obtained double-layered MOF membrane (UiO-66-NH2@ZIF-8) endows multidimensional separation pores: (i) the large pores of UiO-66-NH2 can facilitate water transportation, (ii) the molecular-sieving pores of ZIF-8 can intercept dyes, (iii) UiO-66-NH2 acting as active sites can promote the growth of ZIF-8. As a result, the optimized UiO-66-NH2@ZIF-8 membrane exhibits high flux (36.7 L m−2 h−1 bar−1) and excellent dye rejections (>97.0%). Through analysis and comparison, the regulated multi-type pores play an important role in membrane performance. Coupled with the facile membrane preparing method, this work can used as a potential approach of designing other advanced MOF membrane for water treatment.

engineering, chemical,polymer science
MOF-808/Polyamide Thin-Film Nanocomposite Membranes for Efficient Nanofiltration

Zhen-Zhen Zhao,Tao Wang,Xi Zheng,Yongsheng Ren,Zhi-Ping Zhao

DOI: https://doi.org/10.1021/acsanm.3c02855

IF: 6.14

2023-09-20

ACS Applied Nano Materials

Abstract:Metal–organic frameworks (MOFs) have attracted tremendous interest in preparing a thin-film nanocomposite (TFN) membrane. Especially, the membrane performance could be optimized by using MOFs as modifying agents, which takes advantage of their adjustable and regular pore structure, good compatibility with polymers, and superb functional designability. In this study, a tailored TFN polyamide membrane for nanofiltration was successfully fabricated via interfacial polymerization by incorporating MOF-808 into the selective layer on top of a poly(m-phenylene isophthalamide) (PMIA) substrate. An MOF-808 nanoparticle with a size of approximately 60 nm and a high specific surface area of 1666 m2·g–1 was synthesized using a two-step green method and embedded into the polyamide layer. The surface morphology of the resultant TFN membrane evolved from the nodular structure to a particle aggregation configuration with increased roughness and enhanced hydrophilicity when adding more MOF-808. In particular, the membrane prepared with 0.02 wt % MOF-808 exhibited exceptional water permeance with 17.63 LMH·bar–1 with a well-maintained Na2SO4 rejection of 97.67%, which is superior to commercial membranes and most TFN membranes reported in the literature. The molecular dynamics simulation results showed that the introduction of the MOF-808 filler can significantly enhance the mass transfer of water in the TFN membrane. In addition, the newly designed TFN membrane possessed excellent ion separation performance and superior long-time stability. The findings in this study demonstrate a strategy to regulate the membrane structure, which will provide an impetus for the MOF-based TFN membrane in water treatment and desalination applications.

materials science, multidisciplinary,nanoscience & nanotechnology
Membranes with ZIF-8 regulated MXene nanosheet stacks for efficient molecular sieving

Jian Li,Lei Li,Xin Li,Liangliang Dong,Zhenyu Wang,Jiangnan Shen,Bart Van der Bruggen

DOI: https://doi.org/10.1016/j.desal.2022.116184

IF: 11.211

2023-01-15

Desalination

Abstract:Thin film nanocomposite (TFN) membranes synthesized by introducing nanofillers into a polyamide layer have attracted increasing attentions. However, due to the aggregation of the nanofillers, the fabricated TFN membranes inevitably suffer from a reduced stability. In this work, a novel nanofiltration (NF) selective layer with in-situ formed ZIF-8 was fabricated by an integrated vacuum filtration and interfacial polymerization (IP) method. The d-spacing of MXene nanosheets could be well tailored by controlling the content of in-situ formed ZIF-8 nanoparticles, thus optimizing the surface morphology and chemical composition of the as-prepared NF membrane. The highly hydrophilic MXene nanosheets and controllable ZIF-8 size enabled the molecular sieving ability of the selective layer. Compared with the pristine thin film composite membrane, the optimal membrane exhibited an excellent pure water permeability up to 40.8 L m−2 h−1 bar−1 while maintaining high rejections (>99.0 %) for Congo red, reactive blue 19, xylene brilliant cyaninG250 and methyl blue, respectively. Furthermore, the membranes preserved low salt rejections for Na2SO4, NaCl, MgSO4 and MgCl2. This novel fabrication strategy provides new insights to augment the interlayer distance of 2D nanosheets and broadens the prospects to employ nanofillers inside a membrane matrix for efficient dye/salt separation.

engineering, chemical,water resources
Construction of highly water-stable metal-organic framework UiO-66 thin-film composite membrane for dyes and antibiotics separation

Si-Yuan Fang,Peng Zhang,Ji-Lai Gong,Lin Tang,Guang-Ming Zeng,Biao Song,Wei-Cheng Cao,Juan Li,Jun Ye

DOI: https://doi.org/10.1016/j.cej.2019.123400

IF: 15.1

2020-04-01

Chemical Engineering Journal

Abstract:Metal-organic frameworks (MOFs) materials show great potential in wastewater separation applications. In this study, zirconium-based MOFs (UiO-66) were prepared and constructed universal, high-performance, and flexible nanofiltration (NF) membrane for various dyes and antibiotics separation. The substrate was constructed by two-steps, a) doping graphene oxide (GO) sheets into the membrane casting solution containing polyacrylonitrile (PAN) and forming 2D-3D connecting pores by phase immersion conversion method (defined as GO@PAN), b) immersing the GO@PAN substrate into dopamine solution to self-polymerize into chain macromolecules, which obtaining good compatible and flexible substrate (defined as PGP). Moreover, the UiO-66 was synthesized via solvothermal method and subsequently coated onto the PGP substrate by vacuum-assisted filtration. Benefiting from the water stability, porous structure, and negative charge of UiO-66, the outstanding filtration performance of the UiO-66/PGP thin-film composite (TFC) membrane was achieved. The pure water permeability of the UiO-66/PGP TFC membrane was 31.33 ± 0.75 L m−2h−1 bar−1, and the rejection rates for dye (Congo red, Methyl orange, Rhodamine B, and Methylene blue) and antibiotic (Tetracycline hydrochloride, Oxytetracycline, and Ciprofloxacin) were above 94%. Therefore, we further explored the retention mechanism of the UiO-66/PGP TFC membrane for dye and antibiotic separation (size exclusion and electrostatic interaction). More importantly, antifouling properties and long-time stability of the UiO-66/PGP TFC membrane were also evaluated. These results indicated that the prepared UiO-66/PGP TFC membrane is promising for wastewater treatment, separation, and purification in many industrial and pharmaceutical fields.

engineering, chemical, environmental
Interfacial synthesis of ZIF-8 membranes with improved nanofiltration performance

Yanbo Li,Lik H. Wee,Johan A. Martens,Ivo F.J. Vankelecom

DOI: https://doi.org/10.1016/j.memsci.2016.09.065

IF: 9.5

2017-02-01

Journal of Membrane Science

Abstract:Inspired by the traditional RO membrane fabrication method of interfacial polymerization, ZIF-8 membranes were synthesized on porous polyethersulfone supports based on a liquid–liquid interfacial coordination mechanism. ZIF-8 precursors, zinc nitrate and 2-methylimidazole were dissolved in two immiscible solvents, i.e. water and octanol respectively. The support membrane was first saturated with the aqueous zinc nitrate, followed by pouring an octanol based 2-methylimidazole solution on the surface. After a certain reaction time, a selective MOF layer was formed on the porous polymeric support. XRD patterns combined with ATR-IR results and the SEM images of the synthesized membrane confirmed the formation of a continuous ZIF-8 layer, with selectivities in nanofiltration range, indicating the selective role of the ZIF-8 layer. In this work, the influences of synthesis conditions on the ZIF-8 membrane were investigated in detail, including reaction time, precursor concentrations and support effect. The results showed that dense supports, higher mole ratios of 2-methylimizaole to zinc nitrate and higher 2-methylimizaole concentrations led to denser ZIF-8 membranes with less defects.

engineering, chemical,polymer science
Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

Jinchao Chen,Yong bai,Elia Nabil Shokry Gadallah,Xiangmin Xu,Yuan Jing,Mengmeng Lou,Xingran Zhang,Fang Li

DOI: https://doi.org/10.1016/j.memsci.2023.122382

IF: 9.5

2023-12-22

Journal of Membrane Science

Abstract:Nanofiltration (NF), an exceedingly promising technology, has been extensively implemented within the domain of desalination. The pursuit of optimizing water permeance, while upholding outstanding rejection rates to ameliorate the vexing permeability-selectivity trade-off effect, has raised tremendous concerns. Herein, a novel approach has been proposed, involving the construction of a cyclodextrin-chelated Metal-Organic Framework (MOF) interlayer through vacuum-assisted filtration, aimed at orchestrating the interfacial polymerization (IP) process and sculpting the membrane morphologies of polyamide membranes. The results demonstrated that cyclodextrin-chelated MOF interlayer produced a "gutter" effect for faster water transport and enhanced the interaction of the substrate and PA layer. Simultaneously, the interlayer helped to alleviate the diffusion rate of piperazine (PIP) via the interactions ( e.g. , hydrogen bonds, electrostatic attraction and steric hindrance) between interlayer and PIP, leading to a lower cross-linking degree and a defect-free thinner active layer. Meanwhile, cyclodextrin with intrinsic nano-cavity created more free volume for water transport inside the polymer. Furthermore, the crumpled interlayer established a hydrophilic undulated interface, followed by the generation of micro-wrinkled polyamide layer with larger filtration areas. The optimal membrane exhibited a high permeability of 39.59 L/m 2 h bar, nearly 6.5 times than that of the original membrane, while maintaining a remarkable Na 2 SO 4 rejection of 95.71 %. The strategic deployment of cyclodextrin-chelated MOF interlayers in membrane modification held the potential to efficaciously mitigate the trade-off effect, thereby presenting a promising avenue for the realization of highly-efficient desalination processes.

engineering, chemical,polymer science
Preparation of Metal–Organic Framework/Polyvinylidene Fluoride Mixed Matrix Membranes for Water Treatment

Bo Yin,Liwei Sun,Shaokun Tang,Hu Zhou

DOI: https://doi.org/10.1021/acs.iecr.0c03648

2020-10-21

Abstract:Metal–organic framework (MOF)-based mixed matrix membranes have become a research hotspot in separation field owing to the compatibility between MOF particles and the polymeric matrix. Herein, three types of MOF materials (MW-MIL-101(Cr), MW-UiO-66, and MW-ZIF-8) were successfully synthesized with the microwave-assisted solvo/hydrothermal method. Also, the reaction times of MW-UiO-66 and MW-MIL-101(Cr) are effectively shortened to 5 and 30 min, respectively. Subsequently, high-performance MOF/polyvinylidene fluoride (PVDF) mixed matrix membranes were fabricated via the phase inversion method for water desalination. Compared with the pristine PVDF membrane, the introduction of hydrophilic MW-MIL-101(Cr) and MW-UiO-66 crystals significantly increases water permeability and salt rejection of the mixed matrix membrane because the ordered pore structure is beneficial for selective permeability to salt ions. For the mixed matrix membrane with a PVDF concentration of 20 wt % and MW-UiO-66 doping amount of 30 wt %, water permeability can reach up to 72.57 L·m–2·h–1·bar–1, along with NaCl rejection (96%) being between commercial NF90-4040 (91%) and SWC6-4040 (99%) membranes. In addition, the mixed matrix membrane possesses good cycle stability and potential commercial prospects.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.iecr.0c03648.Experimental procedure; schematic diagram of the reverse osmosis device; FT-IR spectra and pore size distribution of MOF materials; photographs, EDX mapping, and static water angles of MOF/PVDF MMMs; pore size distribution of the M-20%-20% membrane; and zeta potential of MOF/PVDF MMMs (PDF)This article has not yet been cited by other publications.
Protein–polyphenol nanoassemblies modulated construction of zeolitic imidazole framework-67 based nanofiltration membrane for effective separation of dye/salt mixtures

Faizal soyekwo,Xin Mao,Ruixin Nie,Changkun Liu

DOI: https://doi.org/10.2139/ssrn.4713090

IF: 11.211

2024-03-20

Desalination

Abstract:Metal–organic frameworks (MOFs) show great potential in various separation applications. However, fast nucleation rate and crystallization of MOFs, produces non-uniform and uncontrollable sized crystals, which are not suitable for the formation of MOF-based membranes. Herein, we propose the concept of utilizing protein polyphenol nanoassemblies (PPNs) as the building blocks for the confined growth of MOFs to fabricate Zeolitic imidazolate frameworks, ZIF-67 based membrane. We first demonstrated that colloidal PPNs as modulators in solution enables the formation of ZIF-67 MOFs with uniform and controllable crystal sizes. Subsequently, we utilized the metal salt coordinated PPNs (Co 2+ @PPN) as the precursor layer matrix deposited on porous polymeric support to fabricate ZIF-67 membranes via in situ growth strategy at room temperature. The resultant membrane features a robust heterogeneous and well-integrated ZIF-67-reinforced PPN (ZIF-67@PPN) microporous networks. Benefiting from the rigid and multidimensional micropores of ZIF-67, the optimized ZIF-67@PPN1 composite membrane with improved water stability exhibited good water permeance (45.68 L m −2 h −1 bar −1 ), excellent dye desalination performance (Na 2 SO 4 /Congo red selectivity of 1271.47), and good antibiotic desalination performance (NaCl/Erythromycin selectivity of 21.46). The findings in this work provide important engineering concepts for the development of MOF-based membrane using sustainable nature-derived building blocks for emergent environment-relevant desalination applications in the chemical process industry.

engineering, chemical,water resources
Advancing drinking water safety: Facile fabrication of nanofiltration membrane for enhanced antibiotics removal and efficient water softening

Yanyan Liu,Xi Zhang,Mingshuo Chi,Hideto Matsuyama,Yaoli Guo,Kenneth Simoens,Alexander Volodine,Raf Dewil,Junfeng Zheng,Zhongde Dai,Bart Van der Bruggen

DOI: https://doi.org/10.1016/j.desal.2024.118024

IF: 11.211

2024-08-18

Desalination

Abstract:Long-term water consumption with contaminated antibiotics and high levels of hardness threatens the health of humans and animals. In this study, a novel positively charged nanofiltration membrane was designed for the dual purpose of efficiently removing antibiotics and softening hard water. The membrane was fabricated by casting P84 polymer solution onto non-woven fabrics, followed by immersion in the polyethyleneimine (PEI) solution for phase inversion and cross-linking, and finalized interfacial polymerization with trimesoyl chloride. Notably, the rapid immersion of the P84 substrate into PEI drastically reduces preparation time by 95 % compared to the regular method while maximizing PEI storage, resulting in uniform pore sizes and a positively charged surface. The optimal membrane showed a high water permeance of 11.3 L m −2 h −1 bar −1 and exceptional antibiotic rejection, i.e., 99.6 % for enrofloxacin, 99.2 % for ciprofloxacin, and 96.3 % for sulfamethoxazole, as well as a highly effective removal in water hardness (over 96 % of Ca 2+ and Mg 2+ ) at 4 bar. Simulated water separation tests showed that the optimal membrane effectively controls hard water salinity within optimum drinking water ranges (Ca 2+ ≤ 80 mg/L; Mg 2+ ≤ 30 mg/L), providing efficient water softening and antibiotic capture ability. Additionally, the optimal membrane demonstrated a superior anti-bacterial and long-term stability performance. This study has significant potential for improving drinking water supply safety and addressing pressing public health and environmental concerns.

engineering, chemical,water resources
Peyer's Patches as a Portal for DNA Delivery by Lactococcus lactis in Vivo.

A. Yano,Keita Takahashi,Yusuke Mori,Shiori Watanabe,Yuki Hanamura,T. Sugiyama,N. Inoue

DOI: https://doi.org/10.1248/bpb.b17-00657

Biological and Pharmaceutical Bulletin

Abstract:Application of food-grade Lactococcus lactis (L. lactis) as a safe delivery tool for DNA vaccines and therapeutic proteins has been well investigated. Although some studies showed that eukaryotic expression plasmids were transferred from L. lactis to enterocytes, the precise mechanism of the DNA transfer remains unknown. In this study, we generated an invasive L. lactis strain that expresses "murinized" Internalin A, an invasin of intracellular bacteria Listeria monocytogenes with two amino acid alterations for invasion into murine cells, and confirmed that this L. lactis strain delivered DNA in an invasin-dependent manner into a monolayer of epithelial cells polarized to mimic the gastrointestinal tract environment. Although invasive L. lactis inoculated orally can deliver DNA into enterocytes in the gastrointestinal tract of mice, the efficiency of DNA transfer was similar to that of non-invasive L. lactis strain, suggesting that the in vivo DNA transfer from L. lactis occurs invasin-independently. A ligated-intestinal loop assay, a method for a short-term culturing of the whole intestine filled with materials to evaluate the interaction of the materials with intestinal cells, demonstrated that both non-invasive and invasive L. lactis strains were present in the Peyer's patches of the small intestine. On the other hand, few L. lactis was detected in the non-Peyer's patch epithelial region. Thus, our observations lead us to speculate that DNA transfer from L. lactis occurs predominantly in the Peyer's patches in an invasin-independent manner.
Confined‐Coordination Induced Intergrowth of Metal‐Organic Framework into Precise Molecular Sieving Membranes

Guozhen Liu,Binyu Mo,Yanan Guo,Zhenyu Chu,Xiao-Ming Ren,Kecheng Guan,Renjie Miao,Zhenggang Wang,Yaxin Zhang,Wenqi Ji,Gongping Liu,Hideto Matsuyama,Wanqin Jin

DOI: https://doi.org/10.1002/anie.202405676

2024-04-14

Angewandte Chemie International Edition

Abstract:Metal-organic framework (MOF) membranes with rich functionality and tunable pore system are promising for precise molecular separation; however, it remains a challenge to develop defect-free high-connectivity MOF membrane with high water stability owing to uncontrollable nucleation and growth rate during fabrication process. Herein, we report on a confined-coordination induced intergrowth strategy to fabricate lattice-defect-free Zr-MOF membrane towards precise molecular separation. The confined-coordination space properties (size and shape) and environment (water or DMF) were regulated to slow down the coordination reaction rate via controlling the counter-diffusion of MOF precursors (metal cluster and ligand), thereby inter-growing MOF crystals into integrated membrane. The resulting Zr-MOF membrane with angstrom-sized lattice apertures exhibits excellent separation performance both for gas separation and water desalination process. It was achieved H2 permeance of ~1200 GPU and H2/CO2 selectivity of ~67; water permeance of ~8 L·m-2·h-1·bar-1 and MgCl2 rejection of ~95%, which are one to two orders of magnitude higher than those of state-of-the-art membranes. The molecular transport mechanism related to size-sieving effect and transition energy barrier differential of molecules and ions was revealed by density functional theory calculations. Our work provides a facile approach and fundamental insights towards developing precise molecular sieving membranes.

chemistry, multidisciplinary
Metal–Organic Frameworks (MOFs)-boosted filtration membrane technology for water sustainability

Qilin Gu,How Yong Ng,Dan Zhao,John Wang

DOI: https://doi.org/10.1063/5.0002905

IF: 6.6351

2020-04-01

APL Materials

Abstract:Metal–Organic Frameworks (MOFs), which are well-known for their highly controllable level of porosity, large specific surface area, and structural diversity, have been regarded as a class of promising materials for gas storage/separation, liquid separation, energy storage, and conversion. Recently, the applications of MOFs in water technology and sustainability have drawn increasing attention in the research community, although they are much under-investigated. For applications in water technologies, a rational integration of MOFs and bulk substrates is a necessary engineering strategy to improve their stability and recyclability and avoid the potential secondary contamination. In this mini overview, MOF-boosted filtration membrane technology is critically looked into and the current state-of-the-art is discussed. We focus on the membrane filtration technology promoted by MOFs for water treatment, with particular emphasis on the permeability-selectivity trade-off and membrane fouling. In this connection, the configuration and fabrication of MOF-boosted membranes are visited, followed by those MOF-mediated membranes, such as high-permeable membranes, adsorptive membranes, antifouling membranes, and catalytic membranes, where the multi-functionalities are among the key characteristics. A summary is made on the controlling features of these MOF-boosted membranes for water and wastewater treatment, together with the particular challenges and future perspectives.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology

THE “TYROSINASE REACTION” OF THE ACTINOMYCETES

Distillation of Alcohol/water Solution in Hybrid Metal–organic Framework Hollow Fibers

Zeolite Imidazolate Framework Membranes on Polymeric Substrates Modified with Poly(vinyl Alcohol) and Alginate Composite Hydrogels.

[Erythrocyte deformability in microcytic hypochromic anemias].

Hydrophilic Hollow Zeolitic Imidazolate Framework-8 Modified Ultrafiltration Membranes with Significantly Enhanced Water Separation Properties

A novel water-stable two-dimensional zeolitic imidazolate frameworks thin-film composite membrane for enhancements in water permeability and nanofiltration performance

Construction the hierarchical architecture of molybdenum disulfide/MOF composite membrane via electrostatic self-assembly strategy for efficient molecular separation

Highly permeable and acid-resistant nanofiltration membrane fabricated by in-situ interlaced stacking of COF and polysulfonamide films

Facile ZIF–8 nanocrystals interlayered solvent–resistant thin–film nanocomposite membranes for enhanced solvent permeance and rejection

Designing heterogeneous MOF-on-MOF membrane with hierarchical pores for effective water treatment

MOF-808/Polyamide Thin-Film Nanocomposite Membranes for Efficient Nanofiltration

Membranes with ZIF-8 regulated MXene nanosheet stacks for efficient molecular sieving

Construction of highly water-stable metal-organic framework UiO-66 thin-film composite membrane for dyes and antibiotics separation

Interfacial synthesis of ZIF-8 membranes with improved nanofiltration performance

Enhancing the perm-selectivity of thin-film nanocomposite membranes intercalated with cyclodextrin-chelated Metal-Organic Framework via modulated interfacial polymerization

Preparation of Metal–Organic Framework/Polyvinylidene Fluoride Mixed Matrix Membranes for Water Treatment

Protein–polyphenol nanoassemblies modulated construction of zeolitic imidazole framework-67 based nanofiltration membrane for effective separation of dye/salt mixtures

Advancing drinking water safety: Facile fabrication of nanofiltration membrane for enhanced antibiotics removal and efficient water softening

Peyer's Patches as a Portal for DNA Delivery by Lactococcus lactis in Vivo.

Confined‐Coordination Induced Intergrowth of Metal‐Organic Framework into Precise Molecular Sieving Membranes

Metal–Organic Frameworks (MOFs)-boosted filtration membrane technology for water sustainability