Certification update: results of CEN survey.

M. Jezierski,A. Manton

IF: 2.303

Journal of Emergency Nursing

Abstract:

What problem does this paper attempt to address?

Focal plane coincidence method for a multi-view telecentric 3D imaging system

Dezhao Wang,Weihu Zhou,Zili Zhang,Fanchang Meng,Chao Gao

DOI: https://doi.org/10.1364/ol.516093

IF: 3.6

2024-02-10

Optics Letters

Abstract:Dezhao Wang, Weihu Zhou, Zili Zhang, Fanchang Meng, Chao Gao Multi-view microscopic fringe projection systems, which use high-resolution telecentric lenses and the Scheimpflug condition, face ... [Opt. Lett. 49, 919-922 (2024)]

optics
Three-Dimensional Resolution and Contrast-Enhanced Confocal Microscopy with Array Detection

Baoliang Ge,Yifan Wang,Yujia Huang,Cuifang Kuang,Yue Fang,Peng Xiu,Zihao Rong,Xu Liu

DOI: https://doi.org/10.1364/ol.41.002013

IF: 3.6

2016-01-01

Optics Letters

Abstract:What we believe is a novel method for improving confocal microscopy's resolution and contrast in 3D space is proposed. Based on a conventional confocal microscopy setup, we use an array detector composed of 32 photomultiplier tubes (PMTs) to replace one point-detector, where the location offset of each PMT caused a different effective point spread function (PSF). By applying array detection and the fluorescence emission difference method of an image with a solid PSF and another with a donut-shaped PSF, we can enhance lateral resolution about 27% in real time with only one scan, and improve the axial resolving ability by about 22% simultaneously. Experimental results of both fluorescent beads and living cells are presented to verify the applicability and effectiveness of our method.
Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

Yueying Wang,Xu Liu,Xiang Hao

DOI: https://doi.org/10.3788/LOP230533

2023-01-01

Laser & Optoelectronics Progress

Abstract:With the rapid development of precision instrument manufacturing and semiconductor processing industry, the observation and measurement of micro-structure surface profile has become an important orientation of scientific research. Laser scanning confocal microscopy becomes popular in three-dimensional (3D) surface topography because of its high resolution, high signal- to-noise ratio, and excellent optical sectioning ability. In this paper, we first introduce the basic principle of the confocal microscopy. Further, various confocal microscopic methods used in 3D surface topography measurement are reviewed, including different scanning methods, different detection methods, and different spectral- based confocal imaging methods. Finally, the future developments of confocal microscopy are also prospected.
Multi-projector Calibration and Alignment Using Flatness Analysis for Irregular-Shape Surfaces

Qingshu Yuan,Dongming Lu

DOI: https://doi.org/10.1007/978-3-540-89796-5_45

2008-01-01

Abstract:A multi-projector calibration and alignment method, which has no assumptions on projection surfaces' shape, is presented. Based on surface flatness analysis, the method will automatically partition the projection surface into pieces, more at none flat regions and less at flat ones, as flat region will cause less distortions. Corresponding to these pieces, an image will first be cut into some sub-images, and then projected onto the surfaces using texture warping method. The principle which ensures the inner projector distortion correction is proved, that is if a camera captures an undistorted projected image, human eye will also observe an undistorted one at that spot. Multi-projector alignment is achieved by projecting images which are rendered according to the camera's extrinsic parameters during the course of coded structured light capturing. Because the camera can capture a wide field of view area by moving and rotating itself, the alignment method has a build-in support for scalability in view filed. The whole work of calibration and alignment can be done in a single camera capture process. Results show that the proposed method is efficient and robust.
Research progress of depth detection in vision measurement: A novel project of bifocal imaging system for 3D measurement

Anhu Li,Ye Ding,Wei Wang,Yongjian Zhu,Zhizhong Li

DOI: https://doi.org/10.1117/12.2022557

2013-01-01

Abstract:The paper reviews the recent research progresses of vision measurement. The general methods of the depth detection used in the monocular stereo vision are compared with each other. As a result, a novel bifocal imaging measurement system based on the zoom method is proposed to solve the problem of the online 3D measurement. This system consists of a primary lens and a secondary one with the different focal length matching to meet the large-range and high-resolution imaging requirements without time delay and imaging errors, which has an important significance for the industry application.
An absolute phase to world coordinates method for the defocusing structured light shape measurement system

wanzhen zhang,zhebo chen,ruting zhang,bin lin,xiangqun cao

DOI: https://doi.org/10.1016/j.ijleo.2014.08.100

IF: 3.1

2014-01-01

Optik

Abstract:This paper proposes a flexible calibration method for the defocusing structured light three-dimensional (3D) imaging system. Neither a high accuracy translation stage nor the parameters of the projector is required. Therefore the method is more flexible in many practical applications. World coordinates for calibration are obtained based on the method of coordinates from known plane. The monotonic nonlinear relationships between the absolute phase and each world coordinate have been investigated. Different from other methods, in our method, the 3D shape is directly recovered by the absolute phase to world coordinates method. Experimental results show that, when polynomial curve fitting methods are used, the root-mean-squared (RMS) error for the flat plate reconstruction is less than 0.12mm, and the measurement error of 3D points is less than −0.34%. Furthermore, when comparing the measurement results of our method with the method of coordinates from known plane based on camera calibration, the relative error is less than −0.05%. Therefore, camera calibration is considered as the major error source.
Three Dimensional Reconstruction Using a Lenslet Light Field Camera

Wentao Zhang,Shengqian Chang,Xiao Tao,Chang Wang,Chenning Tao,Peizheng Huang,Zhenrong Zheng

DOI: https://doi.org/10.1117/12.2319552

2018-01-01

Abstract:A novel method is proposed in this paper to accurately reconstruct the three-dimensional scenes by using a passive single-shot exposure with a lenslet light field camera. This method has better performance of 3D scenes reconstruction with both defocus and disparity depth cues captured by light field camera. First, the light field data is used to refocus and shift viewpoints to get a focal stack and multi-view images. In refocusing procedure, the phase shift theorem in the Fourier domain is first introduced to substitute shift in spatial domain, and sharper focal stacks can be obtained with less blurriness. Thus, 3D scenes can be reconstructed more accurately. Next, through multi-view images, disparity depth cues are obtained by performing correspondence measure. Then, the focal stack is used to compute defocus depth cues by focus measure based on gray variance. Finally, the focus cost is built to integrate both defocus and disparity depth cues, and the accurate depth map is estimated by using Graph Cuts based on the focus cost. Using this accurate depth map and all-in-focus image, the 3D structure in real world are accurately reconstructed. Our method is verified by a number of synthetic and real-world examples captured with a dense camera array and a Lytro light field camera.
A Novel SFP Extracting/Tracking Framework for Rigid Microstructure Measurement

Sheng Liu,Ting Fang,Zichen Chen

DOI: https://doi.org/10.1155/2012/356454

IF: 1.43

2012-01-01

Mathematical Problems in Engineering

Abstract:3D measurement and reconstruction of rigid microstructures rely on the precise matches of structural feature points (SFPs) between microscopic images. However, most of the existing algorithms fail in extracting and tracking at microscale due to the poor quality of the microscopic images. This paper presents a novel framework for extracting and matching SFPs in microscopic images under two stereo microscopic imaging modes in our system, that is, fixed-positioning stereo and continuous-rotational stereo modes, respectively. A 4-DOF (degree of freedom) micro visual measurement system is developed for 3D projective structural measurement of rigid microstructures using the SFPs obtained from microscopic images by the proposed framework. Under the fixed-positioning stereo mode, a similarity-pictorial structure algorithm is designed to preserve the illumination invariance in SFPs matching, while a method based on particle filter with affine transformation is developed for accurate tracking of multiple SFPs in image sequence under the continuous-rotational stereo mode. The experimental results demonstrate that the problems of visual distortion, illumination variability, and irregular motion estimation in micro visual measurement process can be effectively resolved by the proposed framework.
Autofocusing method for a digital fringe projection system with dual projectors

Min Zhong,Xiaowei Hu,Feng Chen,Chao Xiao,Duan Peng,Song Zhang

DOI: https://doi.org/10.1364/OE.392006

IF: 3.8

2020-01-01

Optics Express

Abstract:This paper presents a novel technique to achieve autofocusing for a three-dimensional (3D) profilometry system with dual projectors. The proposed system uses a camera that is attached with an electronically focus-tunable lens (ETL) that allows dynamic change of camera's focal plane such that the camera can focus on the object; the camera captures fringe patterns projected by each projector to establish corresponding points between two projectors, and two pre-calibrated projectors form triangulation for 3D reconstruction. We pre-calibrate the relationship between the depth and the current being used for each focal plane, perform a 3D shape measurement with an unknown focus level, and calculate the desired current value based on the initial 3D result. We developed a prototype system that can automatically focus on an object positioned between 450 mm to 850 mm. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Pixel-wise Phase Map Fusion Technique for High Dynamic Range 3-D Shape Measurement

Yifei Chen,Jiehu Kang,Luyuan Feng,Leiwen Yuan,Bin Wu

DOI: https://doi.org/10.1088/1361-6501/ad7da6

IF: 2.398

2024-09-21

Measurement Science and Technology

Abstract:Digital fringe projection technologies have been extensively applied in 3-D shape measurements. However, it is still limited to achieve accurate 3-D reconstruction of high reflective surfaces. To circumvent this problem, we propose a complete framework to realize pixel-by-pixel phase post-compensation of overexposed points, including the construction of hardware system and the guidelines of algorithm design. First, a virtual binocular vision system is established. Second, based on the fundamentals of projective and spatial transformation, three robust algorithms with low computational complexity are devised to generate a fused phase map that overcomes the information loss due to overexposure. Furthermore, experiments are conducted to evaluate the performance of the proposed method. Qualitative experiment results show that the presented technique achieve a similar surface coverage compared with the other two mainstream methods, but is superior to them in terms of measurement efficiency (13 images vs. 144 images, 13 images vs. 32 images). Quantitative experimentation further verifies the feasibility of our method in precise 3-D measurement, with sphere diameter errors of 0.0367mm and 0.0361mm, spherical centroid distance error of 0.0269mm, and plane distance error of 0.0186mm.

engineering, multidisciplinary,instruments & instrumentation
3D reconstruction from bifocus imaging

Xu Shu-shu,Wang Yuan-qing,Zhaoyang Zhang

DOI: https://doi.org/10.1109/ICALIP.2010.5684514

2010-01-01

Abstract:This paper presents a method to reconstruct the three-dimensional model in monocular stereo vision. Depth can be obtained from monocular disparity in bifocus images. The stereo disparity results from lenses' separation during imaging. Besides, 3D information can be acquired with depth and camera intrinsic parameters by means of camera calibration. Based on the characteristics of bifocus imaging, this paper develops a new method to detect and match feature, which fits monocular stereo vision much better .With only a pair of bifocus images and a calibrated camera, three-dimensional model of scene is constructed successfully. ©2010 IEEE.
Multi-Depth-of-Field 3-D Profilometry for a Microscopic System With Telecentric Lens

Xianshun Wang,Dongchen Zhu,Wenjun Shi,Jun Liu,Fengjie Fu,Jiamao Li,Xiaolin Zhang

DOI: https://doi.org/10.1109/tim.2021.3137156

IF: 5.6

2022-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:Microscopic profilometry based on fringe projection is notable for its noncontact and robust nature and is widely used in industrial electronics. However, its ability to observe electronic packages is limited by the depth of field (DOF) of the lens. This article proposes a novel reconstruction scheme based on telecentric 3-D profilometry to overcome this limitation. The advantage of profilometry based on phase-shifting fringe projection is utilized through defocus detection to achieve high-precision contour measurement with a single DOF. After completing such local reconstruction, a complete 3-D model is registered from partial fragments in different DOFs, making it simple for the microscope system to measure the geometric structure of objects whose thickness exceeds three times the DOF. To accommodate occlusion in local reconstruction, a specific detection algorithm is designed based on intensity variance. Beyond that, we present a novel projection system calibration scheme to improve the calibration robustness and accuracy. Instead of directly using the detected phase to calculate the coordinates of the corners, we first model the relationship between the phase and pixel coordinates and then leverage the estimated parameters to recover the phase. Our proposed method reduces the influence of calibration board spraying errors on the calibration results. Experiments show the effectiveness of this new approach.

engineering, electrical & electronic,instruments & instrumentation
Calibration method for multi-focus microscopic 3D imaging system

Liming Chen,Wenhua Xiang,Song Zhang

DOI: https://doi.org/10.1364/ol.498283

IF: 3.6

2023-01-01

Optics Letters

Abstract:This Letter presents a novel, to the best of our knowledge, method to calibrate multi-focus microscopic structured-light three-dimensional (3D) imaging systems with an electrically adjustable camera focal length. We first leverage the conventional method to calibrate the system with a reference focal length f0. Then we calibrate the system with other discrete focal lengths fi by determining virtual features on a reconstructed white plane using f0. Finally, we fit the polynomial function model using the discrete calibration results for fi. Experimental results demonstrate that our proposed method can calibrate the system consistently and accurately.
Confocal method for measuring whole-field three-dimensional surface topography

WeiJian Tian,Zhihua Ding,LüRong Guo,Bo Chen,Lin Pang

1998-01-01

Abstract:A confocal method to measure whole-field 3-D surface topography, which employed a micro-optic component to realize parallel measuring and recording was proposed. An array of point light sources produced by the micro-optic component was used to detect one of the confocal plane series simultaneously. And as an alternative to a pinhole diaphragm, the pixels on the CCD plane directly captured and registered the 3-D information intensities from the detected planes. The principle and the depth response relation of the method were discussed, and the primary experimental results and a 3-D reconstructed image were given.
Focal plane wave-front sensing algorithm for high-contrast imaging

JiangPei Dou,DeQing Ren,YongTian Zhu,Xi Zhang

DOI: https://doi.org/10.48550/arXiv.1510.03791

2015-10-13

Instrumentation and Methods for Astrophysics

Abstract:High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging.
Autofocusing Method for High-Resolution Three-Dimensional Profilometry

Xiaowei Hu,Guijin Wang,Jae-Sang Hyun,Yujin Zhang,Huazhong Yang,Song Zhang

DOI: https://doi.org/10.1364/ol.382431

IF: 3.6

2020-01-01

Optics Letters

Abstract:State-of-the-art high-accuracy three-dimensional (3D) profilometry systems typically use a lens with a fixed focal length, making it difficult for them to measure scenes with large depth variations, especially dynamically changing ones. To address this need, this Letter proposes a novel, to the best of our knowledge, autofocusing method for high-resolution 3D profilometry with a digital fringe projection technique by (1) developing a novel continuous geometric parameter model for systems using electrically tunable lenses and (2) employing a focal plane detection algorithm. The validity of the proposed method is confirmed by experiments.
Phase Guided Light Field for Spatial-Depth High Resolution 3D Imaging

Geyou Zhang,Ce Zhu,Kai Liu,Yipeng Liu

2024-04-10

Abstract:On 3D imaging, light field cameras typically are of single shot, and however, they heavily suffer from low spatial resolution and depth accuracy. In this paper, by employing an optical projector to project a group of single high-frequency phase-shifted sinusoid patterns, we propose a phase guided light field algorithm to significantly improve both the spatial and depth resolutions for off-the-shelf light field cameras. First, for correcting the axial aberrations caused by the main lens of our light field camera, we propose a deformed cone model to calibrate our structured light field system. Second, over wrapped phases computed from patterned images, we propose a stereo matching algorithm, i.e. phase guided sum of absolute difference, to robustly obtain the correspondence for each pair of neighbored two lenslets. Finally, by introducing a virtual camera according to the basic geometrical optics of light field imaging, we propose a reorganization strategy to reconstruct 3D point clouds with spatial-depth high resolution. Experimental results show that, compared with the state-of-the-art active light field methods, the proposed reconstructs 3D point clouds with a spatial resolution of 1280$\times$720 with factors 10$\times$ increased, while maintaining the same high depth resolution and needing merely a single group of high-frequency patterns.

Image and Video Processing,Computer Vision and Pattern Recognition
A Three-Dimensional Reconstruction Method Based on Telecentric Epipolar Constraints

Qinsong Li,Zhendong Ge,Xin Yang,Xianwei Zhu

DOI: https://doi.org/10.3390/photonics11090804

IF: 2.536

2024-08-31

Photonics

Abstract:When calibrating a microscopic fringe projection profile system with a telecentric camera, the orthogonality of the camera causes an ambiguity in the positive and negative signs of its external parameters. A common solution is to introduce additional constraints, which often increase the level of complexity and the calibration cost. Another solution is to abandon the internal/external parameter models derived from the physical imaging process and obtain a numerically optimal projection matrix through the least squares solution. This paper proposes a novel calibration method, which derives a telecentric epipolar constraint model from the conventional epipolar constraint relationship and uses this constraint relationship to complete the stereo calibration of the system. On the one hand, since only the camera's intrinsic parameters are needed, there is no need to introduce additional constraints. On the other hand, the solution is optimized based on the full consideration of the imaging model to make the parameters confirm to the physical model. Our experiments proved the feasibility and accuracy of the method.

optics
High-Accuracy Three-Dimensional Deformation Measurement System Based on Fringe Projection and Speckle Correlation

Chuang Zhang,Cong Liu,Zhihong Xu

DOI: https://doi.org/10.3390/s23020680

IF: 3.9

2023-01-07

Sensors

Abstract:Fringe projection profilometry (FPP) and digital image correlation (DIC) are widely applied in three-dimensional (3D) measurements. The combination of DIC and FPP can effectively overcome their respective shortcomings. However, the speckle on the surface of an object seriously affects the quality and modulation of fringe images captured by cameras, which will lead to non-negligible errors in the measurement results. In this paper, we propose a fringe image extraction method based on deep learning technology, which transforms speckle-embedded fringe images into speckle-free fringe images. The principle of the proposed method, 3D coordinate calculation, and deformation measurements are introduced. Compared with the traditional 3D-DIC method, the experimental results show that this method is effective and precise.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
3D Multi-Focus Origin Ensembles Reconstruction Method for Compton Camera Imaging

Zhiyang Yao,Yongshun Xiao,Zhiqiang Chen

DOI: https://doi.org/10.1109/nssmic.2017.8532960

2017-01-01

Abstract:In this paper, we present an algebraic method to acquire the point on the event conical surface using inverse and transfer matrix, which has simple form and high precision. The statistical reconstruction method based on origin ensembles (OE) was introduced, which adopt a probability density function (pdf) to determine ensemble expectation of numbers for detected event origins per voxel. An OE algorithm with multi-focus method (OE-MF) to improve resolution was proposed in this paper. Instead of increase the multi-views by using multiple detectors to combine image, the multi-focus method rely on the software. The calculation of the probability density of the sources in different orientation imaging planes at the same time, is promising to weaken even eliminate the effect of spatial orientation, as well as the distortion in the direction perpendicular to the imaging plane. Our numerical simulation and experiments results demonstrate the feasibility and effectiveness of the proposed OE-MF method, which works well in multi sources reconstruction and enhances the spatial resolution. Future work will focus on combining with multi-angle sampling to reconstruct, more efficient by parallel computation, higher precision by filtration et al.

Certification update: results of CEN survey.

Focal plane coincidence method for a multi-view telecentric 3D imaging system

Three-Dimensional Resolution and Contrast-Enhanced Confocal Microscopy with Array Detection

Advances of Confocal Microscopy in Three-Dimensional Surface Topography Measurement

Multi-projector Calibration and Alignment Using Flatness Analysis for Irregular-Shape Surfaces

Research progress of depth detection in vision measurement: A novel project of bifocal imaging system for 3D measurement

An absolute phase to world coordinates method for the defocusing structured light shape measurement system

Three Dimensional Reconstruction Using a Lenslet Light Field Camera

A Novel SFP Extracting/Tracking Framework for Rigid Microstructure Measurement

Autofocusing method for a digital fringe projection system with dual projectors

Pixel-wise Phase Map Fusion Technique for High Dynamic Range 3-D Shape Measurement

3D reconstruction from bifocus imaging

Multi-Depth-of-Field 3-D Profilometry for a Microscopic System With Telecentric Lens

Calibration method for multi-focus microscopic 3D imaging system

Confocal method for measuring whole-field three-dimensional surface topography

Focal plane wave-front sensing algorithm for high-contrast imaging

Autofocusing Method for High-Resolution Three-Dimensional Profilometry

Phase Guided Light Field for Spatial-Depth High Resolution 3D Imaging

A Three-Dimensional Reconstruction Method Based on Telecentric Epipolar Constraints

High-Accuracy Three-Dimensional Deformation Measurement System Based on Fringe Projection and Speckle Correlation

3D Multi-Focus Origin Ensembles Reconstruction Method for Compton Camera Imaging