Abstract:This study presents a computational fluid dynamics (CFD) based approach to determine the optimal positioning for an atmospheric turbulence sensor on a rotary-wing uncrewed aerial vehicle (UAV) with X8 configuration. The vertical (zBF) and horizontal (xBF) distances of the sensor to the UAV center to reduce the effect of the propeller-induced flow are investigated by CFD simulations based on the k−ε turbulence model and the actuator disc theory. To ensure a realistic geometric design of the simulations, the tilt angles of a test UAV in flight were measured by flying the drone along a fixed pattern at different constant ground speeds. Based on those measurement results, a corresponding geometry domain was generated for the CFD simulations. Specific emphasis was given to the mesh construction followed by a sensitivity study on the mesh resolution to find a compromise between acceptable simulation accuracy and available computational resources. The final CFD simulations (twelve in total) were performed for four inflow conditions (2.5 m s−1, 5 m s−1, 7.5 m s−1 and 10 m s−1) and three payload configurations (15 kg, 20 kg and 25 kg) of the UAV. The results depend on the inflows and show that the most efficient way to reduce the influence of the propeller-induced flow is mounting the sensor upwind, pointing along the incoming flow direction at xBF varying between 0.46 and 1.66 D, and under the mean plane of the rotors at zBF between 0.01 and 0.7 D. Finally, results are then applied to the possible real-case scenario of a Foxtech D130 carrying a CSAT3B ultrasonic anemometer, that aims to sample wind with mean flows higher than 5 m s−1. The authors propose xBF=1.7 m and zBF=20 cm below the mean rotor plane as a feasible compromise between propeller-induced flow reduction and safety. These results will be used to improve the design of a novel drone-based atmospheric turbulence measurement system, which aims to combine accurate wind and turbulence measurements by a research-grade ultrasonic anemometer with the high mobility and flexibility of UAVs as sensor carriers.

Bio-inspired, sensitivity-enhanced, bi-directional airflow sensor for turbulence detection

Flexible Calorimetric Flow Sensor with Unprecedented Sensitivity and Directional Resolution for Multiple Flight Parameter Detection

Compact Sphere-Shaped Airflow Vector Sensor Based on MEMS Differential Pressure Sensors

Extraction of a Weak Flow Field for a Multi-Rotor Unmanned Aerial Vehicle (UAV) Using High-Speed Background-Oriented Schlieren (BOS) Technology.

High Sensitive Flexible Hot-Film Sensor for Measurement of Unsteady Boundary Layer Flow

A Bioinspired Triboelectric Wireless Anemometer with Low Cut-In Wind Speed for Meteorological Uavs

Bioinspired Photoluminescent "Spider Web" as Ultrafast and Ultrasensitive Airflow-Acoustic Bimodal Sensor for Human-Computer Interaction and Intelligent Recognition

Design and implementation of high sensitivity bullet shaped cilia vector turbulence sensor

Bio-inspired Flexible Airflow Sensor with Self-bended 3D Hair-like Configurations

Development and Flight Testing of a Turbulence Mitigation System for Micro Air Vehicles

Bioinspired Dynamic Soaring Simulation System with Distributed Pressure Sensors.

Flow Structure around a Multicopter Drone: A Computational Fluid Dynamics Analysis for Sensor Placement Considerations

Touch the Wind: Simultaneous Airflow, Drag and Interaction Sensing on a Multirotor

A Multifunctional Airflow Sensor Enabled by Optical Micro/nanofiber

Aircraft aerodynamic parameter detection using micro hot-film flow sensor array and BP neural network identification

Anemometer For Detection Of Very Low Speed Air Flow With Three-Dimensional Directionality

Design of an Array of Piezoresistive Airflow Sensors Based on Pressure Loading Mode for Simultaneous Detection of Airflow Velocity and Direction.

A Compact Embedded Flight Parameter Detection System for Small Soaring UAVs

ANEMOMETER WITH THREE-DIMENSIONAL DIRECTIONALITY FOR DETECTION OF VERY LOW SPEED AIR FLOW AND ACOUSTIC PARTICLE VELOCITY DETECTING CAPABILITY

A Flexible Flow Sensor for Detecting Airflow Velocity and Incident Angle

All-optical Airflow Sensor Enables Simultaneous Speed and Direction Measurement