Abstract:Most of dyes cause various environmental and health problems due to their toxic, mutagenic, and even carcinogenic properties. Therefore, several treatment methods are used to remove dyes from wastewater. Adsorption is one of the most preferred methods due to its easy application and high efficiency. The aim of this study is to prepare and characterize KOH-activated pine cone (APC) biochar and use it as adsorbent for removal of anionic diazo dye, Congo red (CR) from aqueous solution. The various operating parameters such as pH, contact time, temperature, initial dye concentration, and adsorbent dosage are optimized in batch adsorption system. Experimental results showed that the prepared APC biochar has a surface area of 1714.5 m2/g and was achieved 94.62% CR removal efficiency at an adsorbent dosage of 2┬Āg/L. The Freundlich, Langmuir, and Temkin adsorption models were used for the mathematical description of the adsorption equilibrium. Experimental data showed the best compatibility with the Freundlich isotherm. Batch adsorption models, based on the assumption of the pseudo first-order, pseudo second-order, and intra particle diffusion mechanisms, were applied to examine the kinetics of the adsorption. Kinetic data fitted the pseudo second-order kinetic model. Calculated thermodynamic parameters indicated the spontaneous, endothermic, and the increased randomness nature of CR adsorption. Structural and morphological changes of APC biochar after adsorption process were determined by using Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) analysis. The prediction of the CR adsorption capacity of the APC biochar using artificial neural network (ANN) algorithm was modeled. For this purpose, many different ANN models have been developed. Among them, ANN10 gave the best results. According to ANN10 results, root-mean-squared error (RMSE), mean bias error (MBE), mean absolute error (MAE), and correlation coefficient (R2) were estimated as 0.770, 0.310, 0.037, and 0.999, respectively. Consequently, the prediction results showed well agreement with experimental results.

CTAB-modified peanut husk pre-treated with KMnO4 as an eco-friendly adsorbent for the uptake of Congo red in solution: adsorption and mechanism study

Adsorption of Congo Red Dye Onto Raw and Chitosan-Modified Bentonite

Removal of Nanoplastics from Aqueous Solution by Aggregation Using Reusable Magnetic Biochar Modified with Cetyltrimethylammonium Bromide

Reusable kaolin impregnated aminated chitosan composite beads for efficient removal of Congo red dye: isotherms, kinetics and thermodynamics studies

Production of eco-friendly adsorbent of kaolin clay and cellulose extracted from peanut shells for removal of methylene blue and congo red removal dyes

Adsorption enhancement of Congo red dye from wastewater based on edamame shell originated activated carbon by the cations: Experimental and theoretical studies

Kinetics, Isotherm and Thermodynamic Studies for Efficient Adsorption of Congo Red Dye from Aqueous Solution onto Novel Cyanoguanidine-Modified Chitosan Adsorbent

Tetraethylenepentamine modified magnetic cellulose nanocrystal composites for removal of Congo red with high adsorption capacity

Efficient removal of Congo red using curcumin conjugated zinc oxide nanoparticles as new adsorbent complex

Cetyltrimethylammonium Bromide-Modified Laponite@Diatomite Composites for Enhanced Adsorption Performance of Organic Pollutants

Studying removal of anionic dye by prepared highly adsorbent surface hydrogel nanocomposite as an applicable for aqueous solution

Eco-friendly approach for effective removal for Congo red dye from wastewater using reusable Zn-Al layered double hydroxide anchored on multiwalled carbon nanotubes supported sodium dodecyl sulfonate composites

Facile Sponge-Like Chitosan Capsules As Efficient Adsorbent for Anionic Congo Red, Reactive Brilliant Blue KNR, and Methyl Blue Dyes: Performance and Mechanism

Alkaline ball-milled peanut-hull biosorbent effectively removes aqueous organic dyes

Adsorption of Congo red from aqueous solution onto KOH-activated biochar produced via pyrolysis of pine cone and modeling of the process using artificial neural network

Efficient ion-enhanced adsorption of congo red on polyacrolein from aqueous solution: Experiments, characterization and mechanism studies

Adsorptive Removal of Congo Red Using Organically Modified Zinc–Copper–Nickel Ternary Metal Hydroxide: Kinetics, Isotherms and Adsorption Studies

Amino-functionalization of lignocellulosic biopolymer to be used as a green and sustainable adsorbent for anionic contaminant removal

Halloysite nanotube@carbon with rich carboxyl groups as a multifunctional adsorbent for the efficient removal of cationic Pb(II), anionic Cr(VI) and methylene blue (MB)

Engineering a low-cost diatomite with Zn-Mg-Al Layered triple hydroxide (LTH) adsorbents for the effectual removal of Congo red: Studies on batch adsorption, mechanism, high selectivity, and desorption

Effective removal of Congo red from aqueous solutions using ethylenediamine-modified wheat straw as adsorbent