Postoperative delirium in elderly after elective and acute colorectal surgery: A prospective cohort study.

J. Raats,S. Steunenberg,R. Crolla,J. Wijsman,A. Slaa,L. Laan

DOI: https://doi.org/10.1016/j.ijsu.2015.04.080

2015-06-01

International Journal of Surgery

Abstract:

What problem does this paper attempt to address?

Research on the Milling Tool Wear and Life Prediction by Establishing an Integrated Predictive Model

Yinfei Yang,Yuelong Guo,Zhiping Huang,Ni Chen,Liang Li,Yifan Jiang,Ning He

DOI: https://doi.org/10.1016/j.measurement.2019.05.009

IF: 5.6

2019-01-01

Measurement

Abstract:As the tool wear increases, the surface quality of the workpiece will decrease, and even the workpiece will be scrapped. Therefore, in order to obtain a better machined workpiece quality, monitoring the tool wear is necessary. By monitoring the machining condition, the degree of the tool wear and the remaining useful life (RUL) can be obtained in time. This paper establishes an integrated prediction model based on trajectory similarity and support vector regression, which can predict the tool wear and life. The time domain and wavelet analysis are carried out. The relationship between the signal characteristic quantity and the tool wear is studied. Five eigenvectors are selected as the input vectors of the prediction model by studying the correlation between 45 characteristic quantities and the tool wear. The model training is carried out by using the PHM public data set. The relative errors of VB value prediction accuracy in the stable stage of the sample tool is above 88% and the prediction accuracy of the stable stage of Tool 1, 2, and 3 is 88.5%, 87.5%, and 90.5% respectively, by using this integrated prediction model, which is better than other four single algorithms. (C) 2019 Elsevier Ltd. All rights reserved.
Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Jarosław Górski,Karol Szymanowski,Piotr Podziewski,Katarzyna Śmietańska,Paweł Czarniak,Mariusz Cyrankowski

DOI: https://doi.org/10.15376/biores.14.2.3379-3388

2019-03-07

BioResources

Abstract:This study focused on a computerised TCM (tool condition monitoring) system as a part of automated monitoring of the machining processes in the wood industry. The system’s principal task was to evaluate the actual state of tool wear without disrupting the normal course of machine tool exploitation for cutting force and vibro-acoustic signals analysis. During the experiment, five physical quantities that are generated during machining were measured and recorded: cutting forces in two directions (Fx, Fy), ultrasonic stress waves (acoustic emission – AE), acoustic pressure in the range of audible frequencies (noise – N), and acceleration of mechanical vibrations (V). Six pairs of tools were used in the experiment. One tool from each pair was experimental, the other was a control tool. Out of the five physical quantities generated during machining that were tested as an indirect source of information on the tool condition, signals of cutting forces and mechanical vibrations proved the most useful. Both acoustic emission and noise signals emerged as wholly inadequate as evidence to predict tool wear.

materials science, paper & wood
Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning

Prashant J. Bagga,Kaushik M. Patel,Mayur A. Makhesana,Şenol Şirin,Navneet Khanna,Grzegorz M. Krolczyk,Adarsh D. Pala,Kavan C. Chauhan

DOI: https://doi.org/10.1007/s00170-023-11137-2

IF: 3.563

2023-02-27

The International Journal of Advanced Manufacturing Technology

Abstract:Abstract One of the essential elements of automated and intelligent machining processes is accurately predicting tool life. It also helps in achieving the goal of producing quality products with reduced production costs. This work proposes a computer vision-based tool wear monitoring and tool life prediction system using machine learning methods. Gradient-boosted trees and support vector machine (SVM) techniques are used to predict tool life. The experimental investigation on the CNC machine is conducted to study the applicability of the proposed tool wear monitoring system. Experiments are performed using workpiece material made of alloy steel and PVD-coated cutting inserts, and flank wear is monitored. An imaging system consisting of an industrial camera, lens, and LED ring light is mounted on the machine to capture tool wear zone images. Images are then processed by algorithms developed in MATLAB ® . Boosted tree methods and the SVM methodology have 96% and 97% prediction accuracy, respectively. Validation tests are carried out to determine the accuracy of proposed models. It is observed that the prediction accuracy of boosted three and SVM is good, with a maximum error of 5.89% and 7.56%, respectively. The outcome of the study established that the developed system can monitor the tool wear with good accuracy and can be adopted in industries to optimize the utilization of tool inserts.

engineering, manufacturing,automation & control systems
Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

Maciej Tabaszewski,Paweł Twardowski,Martyna Wiciak-Pikuła,Natalia Znojkiewicz,Agata Felusiak-Czyryca,Jakub Czyżycki

DOI: https://doi.org/10.3390/ma15124359

IF: 3.4

2022-06-21

Materials

Abstract:The dynamic development of new technologies enables the optimal computer technique choice to improve the required quality in today's manufacturing industries. One of the methods of improving the determining process is machine learning. This paper compares different intelligent system methods to identify the tool wear during the turning of gray cast-iron EN-GJL-250 using carbide cutting inserts. During these studies, the experimental investigation was conducted with three various cutting speeds vc (216, 314, and 433 m/min) and the exact value of depth of cut ap and federate f. Furthermore, based on the vibration acceleration signals, appropriate measures were developed that were correlated with the tool condition. In this work, machine learning methods were used to predict tool condition; therefore, two tool classes were proposed, namely usable and unsuitable, and tool corner wear VBc = 0.3 mm was assumed as a wear criterium. The diagnostic measures based on acceleration vibration signals were selected as input to the models. Additionally, the assessment of significant features in the division into usable and unsuitable class was caried out. Finally, this study evaluated chosen methods (classification and regression tree, induced fuzzy rules, and artificial neural network) and selected the most effective model.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Confidence Interval Estimation for Cutting Tool Wear Prediction in Turning Using Bootstrap-Based Artificial Neural Networks

Lorenzo Colantonio,Lucas Equeter,Pierre Dehombreux,François Ducobu

DOI: https://doi.org/10.3390/s24113432

IF: 3.9

2024-05-26

Sensors

Abstract:The degradation of the cutting tool and its optimal replacement is a major problem in machining given the variability in this degradation even under constant cutting conditions. Therefore, monitoring the degradation of cutting tools is an important part of the process in order to replace the tool at the optimal time and thus reduce operating costs. In this paper, a cutting tool degradation monitoring technique is proposed using bootstrap-based artificial neural networks. Different indicators from the turning operation are used as input to the approach: the RMS value of the cutting force and torque, the machining duration, and the total machined length. They are used by the approach to estimate the size of the flank wear (VB). Different neural networks are tested but the best results are achieved with an architecture containing two hidden layers: the first one containing six neurons with a Tanh activation function and the second one containing six neurons with an ReLu activation function. The novelty of the approach makes it possible, by using the bootstrap approach, to determine a confidence interval around the prediction. The results show that the networks are able to accurately track the degradation and detect the end of life of the cutting tools in a timely manner, but also that the confidence interval allows an estimate of the possible variation of the prediction to be made, thus helping in the decision for optimal tool replacement policies.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Three-Stage Wiener-Process-Based Model for Remaining Useful Life Prediction of a Cutting Tool in High-Speed Milling

Weichao Liu,Wen-An Yang,Youpeng You

DOI: https://doi.org/10.3390/s22134763

IF: 3.9

2022-06-25

Sensors

Abstract:Tool condition monitoring can be employed to ensure safe and full utilization of the cutting tool. Hence, remaining useful life (RUL) prediction of a cutting tool is an important issue for an effective high-speed milling process-monitoring system. However, it is difficult to establish a mechanism model for the life decreasing process owing to the different wear rates in various stages of cutting tool. This study proposes a three-stage Wiener-process-based degradation model for the cutting tool wear estimation and remaining useful life prediction. Tool wear stages classification and RUL prediction are jointly addressed in this work in order to take full advantage of Wiener process, as this three-stage Wiener process definitely constitutes to describe the degradation processes at different wear stages, based on which the overall useful life can be accurately obtained. The numerical results obtained using extensive experiment indicate that the proposed model can effectively predict the cutting tool's remaining useful life. Empirical comparisons show that the proposed model performs better than existing models in predicting the cutting tool RUL.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Remaining Useful Life Prediction Based on Spindle Load and Cutting Process Parameters in Machining

Ankur Krishna,Bilal Muhammed

DOI: https://doi.org/10.1115/imece2019-10571

2019-11-11

Abstract:Abstract Tool wear increases machining resistance, part dimensional inaccuracy and machining vibration. Tool wear monitoring and Remaining Useful Life (RUL) prediction of the tool during machining operation will assist a machine operator to provide tool wear compensation at the right time and plan the tool change activity. These aspects become significantly important for economical and quality production. This work focuses on a physics and data-based approach for monitoring cutting tool wear state and Remaining Useful Life (RUL) during a machining operation by adapting a well-known empirical wear-rate equation. The constants in the model are estimated based on machine heuristics which depends on the tool-machine-workpiece combination. The proposed model takes real-time spindle power and machining process parameters as inputs, which are obtained directly through querying the CNC controller. Therefore, it does not require the mounting of any external sensors on the CNC machine tool. Hence, the proposed method is a more economical and convenient way to predict tool wear and RUL in a machining shop floor. The model is validated from experimental data and it can capture the progression of tool wear and RUL of the tool at any point of time during a machining operation. Since the model captures the physics of tool wear and machining heuristics, it is more robust than a purely data-based model.
Tool wear estimation and life prognostics in milling: Model extension and generalization

Yu Zhang,Kunpeng Zhu,Xianyin Duan,Si Li

DOI: https://doi.org/10.1016/j.ymssp.2021.107617

IF: 8.4

2021-06-01

Mechanical Systems and Signal Processing

Abstract:<p>Tool wear condition is a key factor in milling which directly affects machining precision and part quality. It is essential to seek a convenient method to model and predict tool states. A generic wear model with adjustable coefficients is proposed and validated in this study. Considering the inner mechanisms of different wear stages, the entire tool life is split into three mainly wear zones by critical time, which correspond to three main types of wear: running-in wear, adhesive wear, and three-body abrasive wear. The wear model is validated based on the experimental data, compared with other celebrated wear models, and then further improved to enhance the adaptability and generalization. It is shown that the generalized wear model can discriminate tool wear ranges accurately. The determination coefficient of the wear model is more than 98% with the experimental data. Based on the proposed model, an approach for tool life prognosing and tool wear condition evaluating is proposed. The predictive real-time monitoring data of tool life and wear can be obtained timely with a genetic algorithm.</p>

engineering, mechanical
Computer numerical control machine tool wear monitoring through a data-driven approach

F Gougam,A Afia,MA Aitchikh,W Touzout,C Rahmoune,D Benazzouz

DOI: https://doi.org/10.1177/16878132241229314

IF: 2.1

2024-02-15

Advances in Mechanical Engineering

Abstract:Advances in Mechanical Engineering, Volume 16, Issue 2, February 2024. The susceptibility of tools in Computer Numerical Control (CNC) machines makes them the most vulnerable elements in milling processes. The final product quality and the operations safety are directly influenced by the wear condition. To address this issue, the present paper introduces a hybrid approach incorporating feature extraction and optimized machine learning algorithms for tool wear prediction. The approach involves extracting a set of features from time-series signals obtained during the milling processes. These features allow the capture of valuable characteristics relating to the dynamic signal behavior. Subsequently, a feature selection process is proposed, employing Relief and intersection feature ranks. This step automatically identifies and selects the most pertinent features. Finally, an optimized support vector machine for regression (OSVR) is employed to predict the evolution of wear in machining tool cuts. The proposed method's effectiveness is validated from three milling tool wear experiments. This validation includes comparative results with the Linear Regression (LR), Convolutional Neural Network (CNN), CNN-ResNet50, and Support Vector Regression (SVR) methods.

engineering, mechanical,thermodynamics
Application of Machine Learning Algorithms for Tool Condition Monitoring in Milling Chipboard Process

Agata Przybyś-Małaczek,Izabella Antoniuk,Karol Szymanowski,Michał Kruk,Jarosław Kurek

DOI: https://doi.org/10.3390/s23135850

2023-06-23

Abstract:In this article, we present a novel approach to tool condition monitoring in the chipboard milling process using machine learning algorithms. The presented study aims to address the challenges of detecting tool wear and predicting tool failure in real time, which can significantly improve the efficiency and productivity of the manufacturing process. A combination of feature engineering and machine learning techniques was applied in order to analyze 11 signals generated during the milling process. The presented approach achieved high accuracy in detecting tool wear and predicting tool failure, outperforming traditional methods. The final findings demonstrate the potential of machine learning algorithms in improving tool condition monitoring in the manufacturing industry. This study contributes to the growing body of research on the application of artificial intelligence in industrial processes. In conclusion, the presented research highlights the importance of adopting innovative approaches to address the challenges of tool condition monitoring in the manufacturing industry. The final results provide valuable insights for practitioners and researchers in the field of industrial automation and machine learning.
A novel tool life model for varying process conditions and cutting volumes using cutting power consumption

DOI: https://doi.org/10.1007/s00170-024-13856-6

IF: 3.563

2024-06-12

The International Journal of Advanced Manufacturing Technology

Abstract:Despite numerous studies regarding tool life modeling, it is usually difficult to apply conventional models to industrial fields because of factors such as impractical data acquisition systems, the complexity of model construction, and low adaptability to varying cutting conditions and volumes. This paper introduces a novel tool life model based on the power consumption of a machine tool with respect to varying process parameters; it was hypothesized that the proportion of the power consumed in tool wear (i.e., dissipating the cutting edge) to total power remains constant, regardless of the cutting conditions. Cutting power consumption was measured and integrated with the cutting length in the milling of titanium alloy. The experimental results confirmed the validity of the hypothesis; tool life was successfully predicted based on the accumulated cutting power consumption values, and the effects of variations in cutting volumes were compensated for based on cutting power consumption. The developed model was validated in a case with various feeds and cutting volumes mimicking a field case. Furthermore, the model was able to cope with unexpected incidents, such as a non-continuous coolant supply. Thus, the results demonstrate the applicability and practicality of using the integrated cutting power consumption value to predict tool life. Even in new machining environments such as with new tools and work materials, the developed model can easily be constructed with a small number of experiments to justify the model coefficients. Power consumption is expected to be more widely utilized for process monitoring in industry and as a health indicator based on its excellent performance and practicality.

engineering, manufacturing,automation & control systems
Milling wear prediction using an artificial neural network model

Her-Terng Yau,Ping-Huan Kuo,Song-Wei Hong

DOI: https://doi.org/10.1016/j.engappai.2024.108686

IF: 8

2024-06-16

Engineering Applications of Artificial Intelligence

Abstract:The minimization of milling wear from prolonged contact between a tool and a workpiece is crucial in modern manufacturing, where high precision, efficiency, and productivity are required. Therefore, many researchers have developed systems for monitoring milling wear in real-time. However, while the adoption of multiple sensor signals can enhance the training effectiveness of the model, the complex setup process, data extraction, and feature analysis make it challenging to practically apply it for wear monitoring on production lines. Therefore, this study integrates various machining parameters of machine tools and a single type of sensor signal to extract features related to tool wear. These features are utilized as training data for an artificial neural network (ANN) model. The paper proposes a tool wear prediction ANN model based on automatic hyperparameter tuning and transfer learning, incorporating the architecture of Inception, DenseNet, and Layer Normalization. The network structure enhances the training efficiency for target features by expanding and reusing features from a single sensor's data. The combination of automatic hyperparameter tuning with a general optimizer optimizes the ANN architecture to achieve the best tool wear prediction model. Lastly, the proposed model is compared with other models using metrics including Mean Absolute Error (MAE), Root Mean Square Error (RMSE), and Coefficient of Determination ( R 2 ) to evaluate the model performance. In the results, the proposed model shows the best performance among all the comparing models in all three metrics. The MAE is 0.03527, RMSE is 0.05135, and the R 2 is 0.9611. Compared to the common models such as Random Forest, the MAE and RMSE can be reduced by 43.2%, and 43.5% respectively, and a 9.5% R 2 performance increase.

automation & control systems,computer science, artificial intelligence,engineering, electrical & electronic, multidisciplinary
Tool wear monitoring in roughing and finishing processes based on machine internal data

Tiandong Xi,Igor Medeiros Benincá,Sebastian Kehne,Marcel Fey,Christian Brecher

DOI: https://doi.org/10.1007/s00170-021-06748-6

IF: 3.563

2021-03-05

The International Journal of Advanced Manufacturing Technology

Abstract:Abstract Data analytics plays a significant role in the realization of Industry 4.0. By generating context-related persistent datasets, every manufacturing process in real production becomes an experiment. The vision of Internet of Production (IoP) is to enable real-time diagnosis and prediction in smart productions by acquiring datasets seamlessly from different data silos. This requires interdisciplinary collaboration and domain-specific expertise. In this paper, we present a novel tool wear monitoring system for milling process developed in the context of IoP. This system is based on high-frequency data from the numerical control of the production machine without additional sensors. The novelty of this paper lies in the introduction of virtual workpiece quality and fusion of multiple build-in sensor signals and a force model as decision support. This bridges the time gap between quality inspection and production at the shop floor level, establishes an automated statistical process control system, and provides a more plausible prediction of tool lifetime. The monitoring of two different milling processes in a real production environment is exemplary demonstrated in this paper. The first case is a face roughing process with the aim of rapidly removing large amounts of material. The second case is a face finishing operation that follows roughing and aims to achieve the desired surface quality.
Optimized Material Removal and Tool Wear Rates in Milling API 5ST TS-90 Alloy: AI-Driven Optimization and Modelling with ANN, ANFIS, and RSM

Chinedum Mgbemena,Shadrach Osokam Onyegu

DOI: https://doi.org/10.32388/gegpl7

2023-10-09

Qeios

Abstract:One of the performance measures and responses in manufacturing is the optimization of the Material Removal Rate (MRR) and Tool Wear Rate (TWR). This study used the response surface method (RSM) and AI-based models of artificial neural networks (ANNs) and adaptive neuro-fuzzy inference systems (ANFISs) to model and optimize the MRR and TWR for milling API 5ST TS-90 alloys. A ZX6350C milling machine was used to conduct twenty (20) experimental runs using a 10 mm HSS end-mill cutter. The experiment was designed using Central Composite Design (CCD) in Design Expert 14 software. RSM, ANN, and ANFIS models were applied in the predictive modelling of the milling process with a coefficient of determination above 0.85. Comparatively, ANFIS and RSM were marginally better than ANN in the predicted MRR for the milling process. The ANFIS and RSM were slightly better than ANN in the predicted TWR for the milling operation. Generally, ANFIS showed a better predictive capability than RSM and ANN for both MRR and TWR. The optimum process milling parameters for the alloy were a 720-rpm spindle speed, 24 mm/min feed rate and 0.979 mm depth of cut to achieve an optimized predicted MRR of 1272.163 mm3/min and TWR of 0.781 mm/min. The optimum milling process was validated at the suggested experimental conditions by carrying out the milling experiment at those conditions, and the results of 1270.05 mm3/min for MRR and 0.77 mm/min for TWR showed a close correlation between the predicted and validated optimum. The optimum milling parameters from this study would enhance production at reduced tooling costs associated with tool wear.

English Else
An intelligent prediction model of the tool wear based on machine learning in turning high strength steel

Minghui Cheng,Li Jiao,Xuechun Shi,Xibin Wang,Pei Yan,Yongping Li

DOI: https://doi.org/10.1177/0954405420935787

2020-07-21

Abstract:In the process of high strength steel turning, tool wear will reduce the surface quality of the workpiece and increase cutting force and cutting temperature. To obtain the fine surface quality and avoid unnecessary loss, it is necessary to monitor the state of tool wear in the dry turning. In this article, the cutting force, vibration signal and surface texture of the machined surface were collected by tool condition monitoring system and signal processing techniques are being used for extracting the time-domain, frequency-domain and time-frequency features of cutting force and vibration. The gray level processing technique is used to extract the features of the gray co-occurrence matrix of the surface texture and found that these features changed simultaneously when the cutting tool broke. After this, an intelligent prediction model of tool wear was built using the support vector regression (SVR) whose kernel function parameters were optimized by the grid search algorithm (GS), the genetic algorithm (GA) and the particle swarm optimization algorithm respectively. The features extracted from the signals and surface texture are used to train the prediction model in MATLAB. It was found that after the surface texture features were fused using the intelligent prediction model on the basis of the features of cutting force and vibration, prediction accuracy of the proposed method is found as 97.32% and 96.72% respectively under the two prediction models of GA-SVR and GS-SVR. Moreover, the intelligent prediction model can not only predict the tool wear under different cutting conditions, but also the different wear stages in a single wear cycle and the absolute error between the predicted value and the actual value is less than 10 μm, the confidence coefficient of prediction curve is around 0.99.
Automatic definition of tool life under heavy roughing five-axis milling process in production environment

Rafael Segantin Lacerda,Anselmo Eduardo Diniz

DOI: https://doi.org/10.1007/s00170-022-10058-w

2022-11-12

Abstract:Milling is a very important machining process for many industry fields. In rough milling, changing the tool in the correct moment is an important task, since both, the tool (which is usually big and with many teeth) and the machine used are very expensive. Several studies were carried out mainly during the 1980s and 1990s, seeking to establish criteria for the end of tool life, as well, methods that could indicate the ideal time for tool change in real production. Nevertheless, according to an extensive literature review based on publications in manufacturing technology journals, university research, and benchmarks with industry developments, it was not possible to find out publications that confirms the usage of automatic definition for the end of tool life under heavy roughing five-axis milling in a production environment. Based on this context, the relevance, originality, and contribution of the present work for the scientific community is grounded in developing an automatic tool change process completely independent of the cutting parameters and inside a production environment, that can be replicated for many other machining operations by using state of art technologies (Industry 4.0–The Digital Age), in order to take out of the machine operator's hands the important decision to establish the end of tool life. Aiming this goal, several rough milling experiments were conducted in a real production of hydraulic turbines. The main conclusion was that, in rough milling process, where the admissible flank wear is very high, both, the power consumption of the machine and the cutting temperature at the end of tool life are independent of the cutting conditions ( v c and f z ) and, consequently, a specific value of power and temperature can be established to determine tool life end.

engineering, manufacturing,automation & control systems
An HMM and polynomial regression based approach for remaining useful life and health state estimation of cutting tools

Akhilesh Kumar,Ratna Babu Chinnam,Finn Tseng

DOI: https://doi.org/10.1016/j.cie.2018.05.017

2019-02-01

Abstract:There has been considerable advances, over the last few decades, in sensing instrumentation, hardware, signal processing algorithms, and internet technology infrastructure that has eventually paved the way for long envisioned concept of smart factories under the concept of Industry 4.0. It has been projected that by 2020, somewhere from 26 to 50 billion “things” will be connected to the Internet. This will lead to astonishing amount of precise data in real time. To leverage on the collected data, factories across the globe is embracing digital manufacturing in the era of fourth industrial revolution, Industry 4.0. Combined with today’s more advanced analytics, these data enable industrial organizations to implement new, more effective maintenance strategies to progress further along on the maturity continuum from reactive, to preventive, to condition-based, to predictive, and – ultimately – to prescriptive maintenance. This instigate development of advanced analytic techniques to large scale deployment of conditioned based maintenance. We present a novel approach for health state estimation to facilitate autonomous diagnostics and thereupon we build our prognostics module based on the diagnostics result using a polynomial regression models. The proposed research presents a model based sequential clustering on time series sensor signals for estimating health states of a cutting tool. Results obtained validates the competitive performance of the method on a CNC machining test-bed outfitted with thrust-force and torque sensors for monitoring drill-bits.

computer science, interdisciplinary applications,engineering, industrial
Machine Learning-Based Modelling and Meta-Heuristic-Based Optimization of Specific Tool Wear and Surface Roughness in the Milling Process

Siamak Pedrammehr,Mahsa Hejazian,Mohammad Reza Chalak Qazani,Hadi Parvaz,Sajjad Pakzad,Mir Mohammad Ettefagh,Adeel H. Suhail

DOI: https://doi.org/10.3390/axioms11090430

2022-08-27

Axioms

Abstract:The purpose of this research is to investigate different milling parameters for optimization to achieve the maximum rate of material removal with the minimum tool wear and surface roughness. In this study, a tool wear factor is specified to investigate tool wear parameters and the amount of material removed during machining, simultaneously. The second output parameter is surface roughness. The DOE technique is used to design the experiments and applied to the milling machine. The practical data is used to develop different mathematical models. In addition, a single-objective genetic algorithm (GA) is applied to numerate the optimal hyperparameters of the proposed adaptive network-based fuzzy inference system (ANFIS) to achieve the best possible efficiency. Afterwards, the multi-objective GA is employed to extract the optimum cutting parameters to reach the specified tool wear and the least surface roughness. The proposed method is developed under MATLAB using the practically extracted dataset and neural network. The optimization results revealed that optimum values for feed rate, cutting speed, and depth of cut vary from 252.6 to 256.9 (m/min), 0.1005 to 0.1431 (mm/rev tooth), and from 1.2735 to 1.3108 (mm), respectively.
Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis

Paschalis Charalampous

DOI: https://doi.org/10.1007/s11665-021-05507-8

IF: 2.3

2021-02-08

Journal of Materials Engineering and Performance

Abstract:Cutting force estimation is an essential factor for the stability and the optimization of the machining process. The present article deals with the prediction of the cutting forces during the face milling of AISI 4140 with coated cemented carbide inserts under dry cutting conditions. The required data for the development of the predictive models were obtained through milling investigations conducted in various cutting conditions. Two modeling approaches, particularly machine learning algorithms and finite element analysis, have been employed in the study. A series of machine learning algorithms were applied such as support vector regression, k-nearest neighbor, polynomial regression and random forest. The machine learning and FE models evaluate the dependence of the cutting force magnitude on milling parameters like cutting speed, radial depth of cut and feed per tooth. Results acquired by the predictive models have been compared with the experimental ones. Taking into account the sufficient convergence between them, the introduced machine learning models could be effectively applied in order to estimate the effect of cutting conditions on the developed milling forces. Innovative machine learning models could be implemented into CAM software to increase the productivity of manufacturing procedures.

materials science, multidisciplinary
Remaining Useful-Life Prediction of the Milling Cutting Tool Using Time–Frequency-Based Features and Deep Learning Models

Sameer Sayyad,Satish Kumar,Arunkumar Bongale,Ketan Kotecha,Ajith Abraham

DOI: https://doi.org/10.3390/s23125659

IF: 3.9

2023-06-18

Sensors

Abstract:The milling machine serves an important role in manufacturing because of its versatility in machining. The cutting tool is a critical component of machining because it is responsible for machining accuracy and surface finishing, impacting industrial productivity. Monitoring the cutting tool's life is essential to avoid machining downtime caused due to tool wear. To prevent the unplanned downtime of the machine and to utilize the maximum life of the cutting tool, the accurate prediction of the remaining useful life (RUL) cutting tool is essential. Different artificial intelligence (AI) techniques estimate the RUL of cutting tools in milling operations with improved prediction accuracy. The IEEE NUAA Ideahouse dataset has been used in this paper for the RUL estimation of the milling cutter. The accuracy of the prediction is based on the quality of feature engineering performed on the unprocessed data. Feature extraction is a crucial phase in RUL prediction. In this work, the authors considers the time–frequency domain (TFD) features such as short-time Fourier-transform (STFT) and different wavelet transforms (WT) along with deep learning (DL) models such as long short-term memory (LSTM), different variants of LSTN, convolutional neural network (CNN), and hybrid models that are a combination of CCN with LSTM variants for RUL estimation. The TFD feature extraction with LSTM variants and hybrid models performs well for the milling cutting tool RUL estimation.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation

Postoperative delirium in elderly after elective and acute colorectal surgery: A prospective cohort study.

Research on the Milling Tool Wear and Life Prediction by Establishing an Integrated Predictive Model

Use of cutting force and vibro-acoustic signals in tool wear monitoring based on multiple regression technique for compreg milling

Machine vision-based gradient-boosted tree and support vector regression for tool life prediction in turning

Machine Learning Approaches for Monitoring of Tool Wear during Grey Cast-Iron Turning

Confidence Interval Estimation for Cutting Tool Wear Prediction in Turning Using Bootstrap-Based Artificial Neural Networks

Three-Stage Wiener-Process-Based Model for Remaining Useful Life Prediction of a Cutting Tool in High-Speed Milling

Remaining Useful Life Prediction Based on Spindle Load and Cutting Process Parameters in Machining

Tool wear estimation and life prognostics in milling: Model extension and generalization

Computer numerical control machine tool wear monitoring through a data-driven approach

Application of Machine Learning Algorithms for Tool Condition Monitoring in Milling Chipboard Process

A novel tool life model for varying process conditions and cutting volumes using cutting power consumption

Milling wear prediction using an artificial neural network model

Tool wear monitoring in roughing and finishing processes based on machine internal data

Optimized Material Removal and Tool Wear Rates in Milling API 5ST TS-90 Alloy: AI-Driven Optimization and Modelling with ANN, ANFIS, and RSM

An intelligent prediction model of the tool wear based on machine learning in turning high strength steel

Automatic definition of tool life under heavy roughing five-axis milling process in production environment

An HMM and polynomial regression based approach for remaining useful life and health state estimation of cutting tools

Machine Learning-Based Modelling and Meta-Heuristic-Based Optimization of Specific Tool Wear and Surface Roughness in the Milling Process

Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis

Remaining Useful-Life Prediction of the Milling Cutting Tool Using Time–Frequency-Based Features and Deep Learning Models