Abstract:Statement of problem: Resin-bonded prostheses, including interim resin-bonded prostheses, are effective in preserving tooth structure compared with other types of fixed dental prostheses for the replacement of missing teeth. However, loss of retention remains a notable concern with these types of prostheses. Purpose: The purpose of this in vitro study was to investigate the influence of glass-ceramic type, resin type, and surface finish on the shear bond strength (SBS) to the CAD-CAM ceramics used to fabricate interim resin-bonded prostheses. Material and methods: Eighty 10×2-mm glass-ceramic disks were fabricated by using a diamond saw (IsoMet 1000), 40 from feldspathic porcelain blocks (Vita Mark II) and 40 from lithium disilicate blocks (IPS e.max CAD). Half of the specimens in each group were left with a dull or matte surface finish after cutting, while the other half were glazed with an add-on glaze (VitaAkzento Plus Glaze Spray and IPS e.max CAD Glaze Spray, respectively). The disks were mounted in acrylic resin, and each group was subdivided into 2, with 1 receiving a photopolymerized resin cement (RelyX Veneer) and the other receiving a flowable composite resin (Filtek Supreme Ultimate Flow) to form 2.38×2-mm cylinders. SBS was determined using a universal testing machine (Instron 4411) in accordance with the International Organization for Standardization (ISO) 29022:2013 standard, and failure modes were analyzed by using a stereomicroscope with ×40 magnification. The data were analyzed with a 3-way analysis of variance and Tukey post hoc analysis. The chi-squared test was used to analyze the failure mode (α=.05 for all tests). Results: Ceramic type, resin type, and surface finish significantly impacted SBS (P<.001, P=.003, P<.001, respectively). Lithium disilicate showed higher SBS than feldspathic porcelain, and flowable composite resin exhibited higher SBS than resin cement. Glazed surfaces displayed lower SBS compared with the dull or matte surfaces. The combinations among the 3 materials also impacted SBS (P=.03). In addition, the combinations between ceramic type and surface finish affected SBS (P<.001), regardless of resin cement type. No other combinations affected the SBS (P>.05). The mode of failure was different among the groups (P<.001). In comparison with all other groups, cohesive failures were most prevalent in feldspathic porcelain with a dull or matte surface finish, regardless of the resin type used. Conclusions: The SBS to glass-ceramics was influenced by ceramic material, resin cement type, and surface finish. Flowable composite resin showed higher SBS than resin cement. A dull or matte surface finish exhibited greater bond strength than a glazed surface. Lithium disilicate had higher SBS than feldspathic porcelain.

Massive extraocular extension and parotid lymph node metastasis of uveal melanoma.

Topical Review: Whimpers and Bangs: Of Death and Dying in the Nervous System

Radiopacity of Posterior Restorative Materials: A Comparative In Vitro Study

A Comparative Evaluation of the Bonding Strength, Marginal Adaptation, and Microleakage of Dental Cements in Prosthodontics: An In Vitro Comparative Study

A Comparative Evaluation of the Radiopacity of Contemporary Restorative CAD/CAM Blocks Using Digital Radiography Based on the Impact of Material Composition

In Vitro Analysis of Microbiologic Sealing of Two Different Fixed Implant-Supported Prosthesis Designs Cemented By Four Different Dental Cements

Optical properties of esthetic temporary cements and final restoration color

A comparison of the radiopacities of CAD-CAM restoratives: Effect of thickness

An In Vitro Scanning Electronic Microscope Evaluation

Targeted Elimination of Peroxisome Proliferator-Activated Receptor γ in β Cells Leads to Abnormalities in Islet Mass without Compromising Glucose Homeostasis

Influence of Different Cements on the Color Outcomes of Titanium-Based Lithium Disilicate All-Ceramic Crowns and Peri-implant Soft Tissue.

Influence of topography of nanofibrils of three-dimensional collagen gel beads on the phenotype, proliferation, and maturation of osteoblasts.

Fate of infants with hypoplastic left heart syndrome listed for cardiac transplantation: a multicenter study.

Cement selection criteria for full coverage restorations: A comprehensive review of literature

Effect of surface finish and resin cement on the bond strength to CAD-CAM ceramics for interim resin-bonded prostheses

Evaluation of artifacts produced by conventional dental materials in standard and high-resolution CBCT imaging

Comparative in Vitro Study of Cementing Techniques for Implant-Supported Restorations.

Planned Caesarean section for term breech delivery.

The effect of cement and impression methods on the marginal and internal adaptation of the current monolithic blocks - 3D scanning evaluation

Immediate and Long-Term Pull-Out Bond Strength of 3D-Printed Provisional Crowns

Is there a correlation between physical properties and film thickness of dual- and photo-polymerized resin cements and CAD/CAM-dentin micro-tensile bond strength?