Abstract:Polymer nanocomposite (PNC) films consisted of poly (methyl methacrylate) (PMMA) matrix and wide energy bandgap semiconductor nanocrystallite fillers viz. zinc oxide (ZnO), tin oxide (SnO2), and titanium dioxide (TiO2) were prepared by a sonicated suspension of nanoparticles in polymeric solutions followed by the casting method. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) characterization revealed successful nanocomposite formation of these hybrids. The ultraviolet–visible (UV–Vis) spectroscopic study explained that the absorbance and energy bandgap of these PNC films largely differed with the type of metal oxide nanofillers and their concentrations (i.e., 1–5 wt%). The UV-absorbance was found relatively high for the PMMA/TiO2 films and low for the PMMA/SnO2 films at the same concentration of the fillers. The film thickness dependent study confirmed that the increase of film thicknesses significantly enhanced the UV–Vis absorbance and reduced the energy bandgaps of the same composition PMMA/TiO2 composites. The dielectric permittivity of the ZnO and SnO2 containing PNC films was found to be appreciably increased with the increase of concentration of these nanocrystallite fillers, whereas the films bearing TiO2 nanoparticles exhibited a decrease in permittivity as compared to that of the host PMMA matrix film at the temperature of 30 °C. Further, a gradual decrease in the permittivity of these nanocomposite materials was noted with the increase of experimental electric field frequency from 20 Hz to 1 MHz range. The electric modulus spectra exhibited a single relaxation process in the lower frequency region which attribute to the ester group rotations of the PMMA chain repeat units and it was found to be largely influenced by the fillers and their concentrations in these nanocomposites. The AC electrical conductivities of all these PNC films were observed slightly increased and showed a linear behaviour with the frequency variation. The wide range tailorable behaviour of the optical and dielectric parameters with the change of nanofillers and their concentrations evidence that these PNCs could be promising multifunctional materials for UV-shielders, optical sensors, and bandgap tuners in developing various advanced optoelectronic and organoelectronic devices, and also their use as low permittivity nanodielectric insulators and substrates to architect the next-generation flexible-type electronic devices.

Fabrication of PMMA/PEG/SnO2/SiC quaternary multifunctional nanostructures and exploring the microstructure and optical features for radiation attenuation and flexible photonics applications

Fabrication and characteristics of PMMA–PEG/SiO2–SiC quaternary nanocomposites for gamma ray shielding and flexible optoelectronics applications

Fabrication and ameliorating the features of PMMA/Si3N4/SnO2 promising nanocomposites for multifunctional optics and quantum nanoelectronics applications

Fabrication and exploring the structural and optical features of Si3N4/SiO2 hybrid nanomaterials doped PMMA for promising optoelectronics fields

Ameliorating and Tuning the Structural, Morphological, and Optical Characteristics of Chromium Oxide/Silicon Carbide Promising Hybrid Nanocomposites Doped PMMA for Futuristic Nanoelectronics and Photonics Applications

Synthesis of PMMA/PEG/SiO2/SiC Multifunctional Nanostructures and Exploring the Microstructure and Dielectric Features for Flexible Nanodielectric Applications

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

A comparative study of PMMA/PEG polymer nanocomposites doped with different oxides nanoparticles for potential optoelectronic applications

Fabrication of SiC-Al2O3 Nanoceramic Doped Organic Polymer For Flexible Nanoelectronics and Optical Applications

Fabrication and Analysis of PVA/TiC/SiC Hybrid Nanostructures for Nanoelectronics and Optics Applications

Low Dielectric Constant Nanoporous Silica/pmma Nanocomposites with Improved Thermal and Mechanical Properties

Polymer nanocomposites comprising PMMA matrix and ZnO, SnO2, and TiO2 nanofillers: A comparative study of structural, optical, and dielectric properties for multifunctional technological applications

Preparation of a novel SiO2/PMMA nanocomposite with high transparency, thermal stability, and superior surface hardness via gamma‐radiation polymerization

Fabrication and unraveling the morphological, structural, and dielectric features of PMMA-PEO-SiC–BaTiO3 promising quaternary nanocomposites for multifunctional nanoelectronics applications

Tailoring the design, structure and spectroscopic characteristics of SiC/CuO doped transparent polymer for photonics and quantum nanoelectronics fields

Fabrication and Tailoring the Structural and Dielectric Characteristics of GO/Sb2O3/PMMA/PC Quaternary Nanostructures For Solid State Electronics Nanodevices

Fabrication and Augmented Structural, Optical and Electrical Features of PVA/Fe2O3/SiC Hybrid Nanosystem for Optics and Nanoelectronics Fields

Optical and UV Shielding Properties of Inorganic Nanoparticles Embedded in Polymethyl Methacrylate Nanocomposite Freestanding Films

Structural, Morphological, and Gamma Ray Shielding (GRS) Characterization of HVCMC/PVP/PEG Polymer Blend Encapsulated with Silicon Dioxide Nanoparticles

Fabrication and augmentation of optical and structural characteristics of PVA/SiC/CoFe2O4 hybrid nanocomposites for tailored optical and quantum electronics applications

Fast and Simple Fabrication of ternary PVA/CeO2/SiC Nanocomposites for Optoelectronic and Antimicrobial Applications