Abstract:Synthesis methods of composites. Copper‐based metal–organic frameworks is anticipated to find applications in the field of friction materials owing to its plentiful surface‐active groups and distinctive framework structure. In this study, copper‐based metal–organic frameworks was synthesized through ultrasound‐assisted method and incorporated alone into carbon fiber reinforced epoxy composites or together with SiO2 nanoparticles towards the goal of improving the composites' friction and wear properties. It is revealed that copper‐based metal–organic frameworks alone cannot improve the friction and wear of carbon fiber reinforced epoxy composites simultaneously. The combination of copper‐based metal–organic frameworks and SiO2 nanoparticles was more effective in enhancing both the mechanical and tribological properties of studied composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s. Additionally, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3 N/m. Through morphological and chemical analysis on the worn surfaces and transfer films, the functioning mechanism of copper‐based metal–organic frameworks in modifying the mechanical and tribological properties was discussed. It was discovered that a tribological synergy exists between short carbon fibers, copper‐based metal–organic frameworks, and SiO2 fillers, leading to a shift in the wear mechanism of the composite materials from abrasive wear to adhesive wear. Concurrently, a shear‐prone transfer film forms on the surface of the counter steel surfaces. Findings of the present study pave a new route of designing high performance epoxy based tribo‐composites by using metal–organic frameworks. Highlights Cu‐BDC nanosheets were synthesized using ultrasound‐assisted techniques and incorporated as tribological fillers in EP composites. The combined use of Cu‐BDC, SiO2, and SCF fillers synergistically enhances the mechanical and tribological properties of EP composites. The composite material exhibits a friction coefficient of 0.104 under the specified test conditions of 10 MPa and 3.75 m/s, the specific wear rate is impressively low, measuring only 5.64 × 10−7 mm3N/m. During the sliding friction process of the composite materials, Cu‐BDC and SiO2 play a crucial role in reducing SCF pull‐out wear through their anchoring effect. The dynamic coordination bond structure of Cu‐BDC contributes to the formation of uniform and continuous transfer films on counter metal surfaces.

Study on current-carrying friction and wear properties of copper-graphite brush material reinforced by organosilicon

Tribological Characteristics of Silicon Nitride-chilled Cast Iron with Oil-less Lubrication

The Research on Friction and Wear Properties of Silicon Carbide and Silicon Nitride

Effect of Lubricating Condition on Tribological Properties of Nano-SiO2 Filled Polyamide Composite

Enhancement of Tribological Properties in Siliconized Graphite Via Hierarchically Hybrid SiC/C Composite

Organic–Inorganic Hybrid Polysiloxane Brushes with Improved Lubrication and Load-Bearing Capacity

Study on the Tribological Properties of Carbon Fabric/Polyimide Composites Filled with SiC Nanoparticles

Friction and Wear Protection Performance of Synthetic Siloxane Lubricants

Effect of silane coating surface treatment on friction and wear properties of carbon fiber/PI composites

Study on Friction and Wear Properties of New Self-Lubricating Bearing Materials

Effect of Electrical Current on the Tribological Property of Cu-Graphite Brush

Study on the lubrication film formation and characteristics of different graphite seal composites

Study of wear-resistance of anticorrosive organosilicon coatings under different operation condition

A Novel Method to Prepare Self‐lubricity of Si3N4/Ag Composite: Microstructure, Mechanical and Tribological Properties

Mechanical and tribological properties of silicon carbide /carbon fiber/epoxy resin based composites

Study on Lubrication and Friction Reduction Properties of ZIF-8 Nanoparticles as Si3N4 Ceramic Water Lubrication Additives

Tribological synergy of copper‐based metal–organic frameworks, carbon fibers and SiO2 in modifying the friction and wear properties of epoxy composites

Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites

The Microstructure and Wear Characteristics of Cu–Fe Matrix Friction Material with Addition of SiC

Wear Mechanism of Copper-based Powder Metallurgical Friction Materials with Different Graphite Content

Study on Friction Properties of Cu-Based Friction Materials with Ni Coated Nano-Sio2 Particles