Effect of notch depth ratio on mode I and mixed mode I-II fracture properties of engineered cementitious composites (ECC)

Shuling Gao,Lin Qi,Yanping Zhu,Wenchang Wang

DOI: https://doi.org/10.1016/j.ijsolstr.2021.111363

IF: 3.667

2022-02-01

International Journal of Solids and Structures

Abstract:The effect of initial notch depth ratios (a/h) on the mode I and mixed mode I-II fracture properties of ECC was studied by using three-point bending test and four-point shear test, respectively. For mode I fracture, the initial fracture toughness K IC ini and unstable fracture toughness K IC un- and K IC un+ instead of K IC un based on double-K fracture criterion are calculated. The mode I fracture energy G I is calculated by load-crack mouth opening displacement curve (P-CMOD). For mixed mode I-II fracture, the initial effective stress intensity factor ( K eff ini ) are calculated by using nonlinear finite element software and the mixed mode fracture energy G I–II is analyzed. Also, crack propagation mechanism of ECC under mixed mode I-II fracture is analyzed from P-CMOD curve and load-crack mouth sliding displacement (P-CMSD) curve, and mixed mode I-II crack propagation of ECC is divided into six stage. It is found that when 0.3 ≤ a/h ≤ 0.8, the K IC ini does not change. While, K IC un increases when a/h increases from 0.1 to 0.3, decreases when a/h increases from 0.3 to 0.7 and G I decreases with the a/h increasing from 0.3 to 0.8. G I–II is much larger than G I due to an obvious inclined fracture process zone with many micro-cracks dissipating energy in the mixed mode I-II fracture. The G I–II increases with the a/h increasing from 0.1 to 0.6 and decreases with the increase of the a/h from 0.6 to 0.8. While, the crack initiation angle increases with the increase of a/h in the mode I-II fracture.

mechanics