Abstract:Highlights: • Synthesis of vanadium metal organic frame work (V-MOF). • Efficient adsorption of hazardous pesticides methyl parathion (MP). • The adsorbents proved reusable through six cycles. • The adsorption was kinetically fitted to a pseudo-second order. • The adsorption was isothermally matched to a Langmuir. • Utilizing the Box-Behnken design, the outcomes were improved. Vanadium metal–organic frameworks (V-MOF) has a great potential to remove contaminants from water that come from agriculture wastewater methyl parathion (MP) pesticides with high effectiveness. Using a variety of methods, such as SEM, FT-IR, XPS), XRD, and BET analysis, the adsorbent was successfully synthesized and characterized. The dimensions of the pores measured at 1.33 nm correspond to the classification of micropores under the IUPAC system. Before the adsorption process, the material had a surface area of 1489.42 m 2 /g and a pore volume of 0.98 cc/g. After MP adsorption, the surface area, pore size, and pore volume decreased to 1268.42 m 2 /g, 1.12 nm, and 0.64 cc/g, respectively. Changes in the material's physical properties indicate that the adsorption process had an effect. 7.2 was the result of controlling the point of zero charge through surface characterization. This information suggests that the surface of the adsorbent has a positive charge at pH below 7.2 and at the pH higher than this value the surface will have a negative charge. It was also looked into how pH affected the adsorption equilibrium. Although fitting to Langmuir isothermally, the kinetics of MP adsorption onto V-MOF are pseudo-second-order fitting. It is very probable that chemisorption was the mode of adsorption because the adsorption energy was 23.62 kJ.mol −1 . The enthalpy (ΔH o ) values obtained as a result of studying the thermodynamic parameters are positive, demonstrating that, within this temperature range, the pesticide adsorption process was endothermic., measuring 32.79 kJ.mol −1 . Entropy (ΔS o ) readings that are positive indicate that the system's randomness increased during the adsorption process, reaching 119 J.mol −1 K −1 , and with rising temperatures, the negative of ΔG o rise. The effectiveness of the recommended adsorbent was evaluated by filtering wastewater samples in a laboratory environment. It is hypothesized that V-MOF and MP will interact by pore filling, π-π interaction, H-bonding, electrostatic contact, and other possible methods. Considering the specifics of this interaction in great detail is essential to comprehending the nature of adsorption and effectively constructing the adsorbent for use in real-world applications. Water filtering and the treatment of industrial effluents were made simple and effective by the use of V-MOF adsorbent technology. The results indicated that 383.6 mg/g was the maximal adsorption capacity at pH = 6. To evaluate the renewal of the adsorbent, more tests were carried out, and the outcomes showed that the renewal continued even after more than six cycles. The stability of the adsorbent during regeneration was confirmed by using XRD and FT-IR. The Box Behnken design (BBD) was then employed to optimize the adsorption outcomes. Graphical abstract Download: Download high-res image (186KB) Download: Download full-size image

Sugeno fuzzy inference system modeling and DFT calculations for the treatment of pesticide-laden water by newly developed arginine functionalized magnetic Mn-based metal organic framework

Removal of tricyclazole residues from water by sorption on metal organic frameworks (MOFs): A theoretical insight of the experimental data

Magnetic COFs for the Adsorptive Removal of Diclofenac and Sulfamethazine from Aqueous Solution: Adsorption Kinetics, Isotherms Study and DFT Calculation.

A sustainable approach for the removal of chlorpyrifos pesticide from aqueous phase using novel nano magnetized biochar

The Behavior of Mixed Metal Based Copper–Organic Framework for Uptake of Chlorpyrifos Pesticide from Wastewater and its Antimicrobial Activity

Process modeling, characterization, optimization, and mechanisms of fluoride adsorption using magnetic agro-based adsorbent

Cysteine-functionalization Zirconium-Organic Framework for Efficient Adsorption 2,4-Dichlorophenylacetic Acid from Water

3D, Eco-Friendly Metal-Organic Frameworks@carbon Nanotube Aerogels Composite Materials for Removal of Pesticides in Water

Removal of 4-chloro-2-methylphenoxyacetic acid from water by MIL-101(Cr) metal-organic framework: kinetics, isotherms and statistical models

Double layer MOFs M-ZIF-8@ZIF-67: The adsorption capacity and removal mechanism of fipronil and its metabolites from environmental water and cucumber samples

Facile synthesis of novel magnesium oxide nanoparticles for pesticide sorption from water

Development and assessment of vanadium-based metal–organic frameworks for the effective elimination of hazardous pesticides from aqueous solutions: Mechanism of uptake, adsorption capacities, rate of uptake, and enhancement via the Box-Behnken design

Efficient removal of ciprofloxacin and ofloxacin from aqueous solutions using a novel nano-scale adsorbent: Modeling, optimization, and characterization

Integrating DFT and machine learning for the design and optimization of sodium alginate-based hydrogel adsorbents: Efficient removal of pollutants from wastewater

Synthesis of Carbon-Coated Magnetic Nanocomposite (fe3o4@c) and Its Application for Sulfonamide Antibiotics Removal from Water

Poly(ionic liquids)-functionalized metal-organic frameworks for sustainable water purification

Experimental and Modeling of Dicamba Adsorption in Aqueous Medium Using MIL-101(Cr) Metal-Organic Framework

Hierarchical magnetic nitrogen-doped porous carbon derived from a covalent organic framework (COF) for the highly efficient removal of sulfamerazine

Amido-Functionalized Magnetic Metal−Organic Frameworks Adsorbent for the Removal of Bisphenol A and Tetracycline

MOFs and MOF‐Based Composites for the Adsorptive Removal of Ciprofloxacin

Metal-organic frameworks as superior adsorbents for pesticide removal from water: The cutting-edge in characterization, tailoring, and application potentials