Pathogenesis of "fibrosis" in interstitial pneumonia: an electron microscopic study.

A. Katzenstein

DOI: https://doi.org/10.1016/S0046-8177(85)80279-3

IF: 3.526

1985-10-01

Human Pathology

Abstract:

What problem does this paper attempt to address?

Synthesis, structure, and luminescence properties of SrSiAl2O3N2:Eu2+ phosphors for light-emitting devices and field emission displays

Xicheng Wang,Zhengyan Zhao,Jianyan Ding,Yanyan Li,Chuang Wang,Aijun Mao,Yuhua Wang

DOI: https://doi.org/10.1039/c5dt00800j

IF: 4

2015-01-01

Dalton Transactions

Abstract:A series of SrSiAl2O3N2:Eu(2+) (0.005 ≤x≤ 0.05) phosphors were successfully synthesized through a pressureless, facile, and efficient solid state route. The crystal structure, band structure, and their photoluminescence and cathodoluminescence properties were investigated in detail. The phosphors exhibit rod shape morphology with a uniform Eu(2+) distribution. Under n-UV excitation the emission spectra shift from 477 to 497 nm with an increase of Eu(2+) concentration. The concentration quenching mechanism of Eu(2+) emission was dominated by the dipole-dipole interaction. The thermal stability is comparable to that of the commercial Ba2SiO4:Eu(2+) phosphor. The phosphor also exhibits high current saturation and high resistance under low voltage electron bombardment. All the results indicate that the SrSiAl2O3N2:Eu(2+) phosphors can be considered as candidates for application in both white LEDs and FEDs.
Governing the crystallographic sites for tuning Eu2+ emission in an apatite oxyfluoride host to be applied for superior white light emitting diodes

Sreevalsa Subhagan,Shahzad Ahmad,Partha Kundu,Mukesh Kumar Pandey,Sudipta Som,Subrata Das

DOI: https://doi.org/10.1039/d2dt02236b

2022-10-04

Abstract:Single white light-emitting phosphors for near-UV-converted white light-emitting diodes (WLEDs) are the best alternatives to tricolour phosphor blends and blue light converted yellow-emitting garnets. Nevertheless, achieving white light with elevated colour rendering (CRI) from a single-phase phosphor activated with a lone activator ion is a major challenge. This study aimed at the generation of white light from a single-phase composition activated only with europium. The study started with structural evaluations of Eu3+-activated Ca4La6Si6O24F2 phosphors using X-ray diffraction (XRD) and Eu3+ photoluminescence to elucidate the local environment of rare-earth ions and the symmetric nature of the lattice sites. Ca4La6Si6O24F2 crystallized in the hexagonal P63/m space group. The predominant 5D0-7F2 electric dipole transition at 614 nm, and the non-splitting as well as the zero-shifting behaviour of 5D0-7F0 at 578 nm, suggested that the rare-earth ionic substitutions preferably took place at the larger asymmetric sites. Introducing Sr2+ ions in Ca4La6Si6O24F2:Eu3+/Eu2+ that is synthesized under a reducing atmosphere suppressed Eu3+ emission. From the optimized Ca1.98Sr1.98La6Si6O24F2:0.04Eu2+, a sequence of M2+-codoped (M = Mg/Ba) Ca1.98Sr1.98La6Si6O24F2:0.04Eu2+ phosphors were further developed. The substitutions of Mg2+ and Ba2+ altered the crystal field by changing the lattice parameters. The Mg2+ -doped samples showed a blue-shift from 520 nm (Mg2+ = 0) to 471 nm (Mg2+ = 1.0), whereas the Ba2+-doped compositions showed a red-shift from 520 nm (Ba2+ = 0) to 536 nm (Ba2+ = 1.2). The change of symmetry owing to the Mg2+/Ba2+ substitution could have led to the centroid shift, which was responsible for the blue- or red-shift of the emission spectra. The XRD of Ca1.38Sr1.38La6Si6O24F2:0.04Eu2+,1.2Ba2+ indicated a Ba2+-induced lattice site expansion. Keeping this in view, the Eu2+ ions concentrations were further enhanced from 0.04 to 0.3, and the resultant photoluminescence was further enhanced and red-shifted. The optimized sample showed better intensity compared with the commercial Y3Al5O12:Ce3+ and exhibited decent photoluminescence above 70% at 150 °C as compared with that at room temperature. Finally, several prototype WLEDs were fabricated using the single phosphor Ca1.365Sr1.365La6Si6O24F2:0.07Eu2+,1.2Ba2+ with near-UV and violet-LED chips. The outcomes indicated the promising nature of this single-composition phosphor for indoor lighting.
A single Eu2+-activated high-color-rendering oxychloride white-light phosphor for white-light-emitting diodes

Peng-Peng Dai,Cong Li,Xin-Tong Zhang,Jun Xu,Xi Chen,Xiu-Li Wang,Yan Jia,Xiaojun Wang,Yi-Chun Liu

DOI: https://doi.org/10.1038/lsa.2016.24

2016-02-01

Light: Science and Applications

Abstract:Single-phased, high-color-rendering index (CRI) white-light phosphors are emerging as potential phosphor-converted white-light-emitting diodes (WLEDs) and as an alternative to blends of tricolor phosphors. However, it is a challenge to create a high CRI white light from a single-doped activator. Here, we present a high CRI (Ra = 91) white-light phosphor, Sr5(PO4)3-x(BO3)xCl:Eu2+, composed of Sr5(PO4)3Cl as the beginning member and Sr5(BO3)3Cl as the end member. This work utilized the solid-solution method, and tunable Eu2+ emission was achieved. Color-tunable Eu2+ emissions in response to structural variation were observed in Sr5(PO4)3-x(BO3)xCl solid solutions. This was further confirmed using X-ray Rietveld refinement, electron paramagnetic resonance spectroscopy, and in the photoluminescence spectra. The color-tunable emissions included the white light that originated from the combination of the blue emission of Sr5(PO4)3Cl:Eu2+ and an induced Eu2+ yellow emission at approximately 550 nm in the solid solution. Importantly, the white-light phosphors showed a greater R9 = 90.2 under excitation at 365 nm. This result has rarely been reported in the literature and is greater than that of (R9 = 14.3) commercial Y3Al5O12:Ce3+-based WLEDs. These findings demonstrate the great potential of Sr5(PO4)3-x(BO3)xCl:0.04Eu2+ as a white-light phosphor for near-UV phosphor-converted WLEDs. These results also provide a shortcut for developing a high CRI white-light phosphor from a single Eu2+-doped compound.
Investigations on structural and optical properties of Eu3+-activated Sr2GdNbO6 double-perovskite phosphors for solid-state lighting

T.S. Sreena,G. Dhanu Krishna,Veena Lalan,K.P.P. Najiya,K.G. Gopchandran

DOI: https://doi.org/10.1016/j.optmat.2024.115161

IF: 3.754

2024-04-01

Optical Materials

Abstract:Red-emitting phosphors with high quantum efficiency are required to develop high-performance white light-emitting diodes (WLEDs). Herein, we demonstrated a series of thermally stable, high-efficiency Eu3+ activated double perovskite Sr2GdNbO6 red phosphors synthesized via a high-temperature solid-state reaction method. A systematic investigation has been done into the structural, morphological and optical properties, including emission and excitation spectra, temperature-dependent luminescence, internal quantum efficiency (IQE), color purity and CIE chromaticity coordinates of the phosphors. The developed double perovskite oxide crystallizes in monoclinic form with a space group P21/n. Under 392 nm excitation, the prepared phosphors exhibited intense red emission at about 613 nm attributed to the electric dipole transition (5D0 → 7F2), with excellent color purity (95.56%) and high IQE (55%). The optimum doping concentration of Eu3+ was found to be 20 mol%, and the critical transfer distance of Eu3+ ion was calculated to be around 11 Å. Furthermore, the Sr2Gd0.80NbO6:0.20Eu3+ phosphor displayed significant thermal stability with a 0.18 eV activation energy, and the emission intensity at 423 K persisted around 77% of its original value at 300 K. The modification of the local environment around Eu3+ ions at low temperatures (∼80K) shift the energy levels and alter the probabilities of different emission processes, leading to the switching of emission from 5D0 → 7F2 to 5D0 → 7F1 transitions from Eu3+ activated Sr2GdNbO6 double-perovskite phosphors. These findings suggest that the Sr2GdNbO6:Eu3+ phosphors may find use in blue LED-based white light-emitting diodes (w-LEDs).

materials science, multidisciplinary,optics
Warm-white-light Emission from Eu2+/Mn2+ -Coactivated NaSrPO4 Phosphor Through Energy Transfer

Yao Li,Hairong Li,Bitao Liu,Jia Zhang,Zhengyan Zhao,Zhigang Yang,Yan Wen,Yuhua Wang

DOI: https://doi.org/10.1016/j.jpcs.2012.09.020

IF: 4.383

2012-01-01

Journal of Physics and Chemistry of Solids

Abstract:A series of white-light-emitting NaSrPO4:Eu2+, Mn2+ phosphors were successfully synthesized by solid-state reaction and their photoluminescence properties were investigated. The NaSrPO4:Eu2+, Mn2+ phosphor system exhibits a broad excitation band in the wavelength range of 250–420nm, which is well-matched with ultraviolet (UV) light-emitting-diode (LED) chips (typically 365nm). As a result of fine-tuning of the emission composition of the Eu2+ and Mn2+ ions, warm-white-light emission can be realized in a single host lattice under 365nm excitation. Efficient resonant energy transfer from the Eu2+ to Mn2+ ions has been observed. The energy transfer efficiency and critical distance were calculated. The results indicate that the developed phosphor can be used as a potential candidate for white LEDs.
Surgical aspects of thoracic tuberculosis: a contemporary review--part 2.

A. Pezzella,W. Fang

DOI: https://doi.org/10.1067/j.cpsurg.2008.06.006

IF: 2.815

2008-11-01

Current Problems in Surgery

Abstract:
Eu3+-Activated Sr3ZnTa2O9 single-component white light phosphors: emission intensity enhancement and color rendering improvement

Xiaohui Li,Bojana Milićević,Miroslav D. Dramićanin,Xiping Jing,Qiang Tang,Jianxin Shi,Mingmei Wu

DOI: https://doi.org/10.1039/c9tc00159j

IF: 6.4

2019-01-01

Journal of Materials Chemistry C

Abstract:Single-component white light phosphors with a broad and full color spectrum are urgently required to overcome residual problems with commercial phosphors. In this paper, we describe how Eu3+, as the dopant of Sr3ZnTa2O9 (SZT), plays an important role in structural modulation (including structural order-disorder and intrinsic oxygen defects), as demonstrated by electronic structural calculations and systematic experiments. Furthermore, D-5(0) F-7(2) emission of Eu3+ provides the red component of the emission spectrum and increases the color rendering index of SZT:Eu3+ phosphors. Consequently, the resulting phosphor SZT:10%Eu3+ shows significantly enhanced emission intensity, and its broadband emission covers the entire visible region from 400 nm to 720 nm. A fabricated LED device using a near-ultraviolet 370 nm chip coated with a single-component, the SZT:10%Eu3+ phosphor, shows warm white emission with a high color rendering index (R-a = 82).
Luminescence Properties of Sr2ZnWO6:Eu3+ Phosphors

Xueliang Zhang,Zhaosheng Li,Haitao Zhang,Shuxin Ouyang,Zhigang Zou

DOI: https://doi.org/10.1016/j.jallcom.2008.01.117

IF: 6.2

2009-01-01

Journal of Alloys and Compounds

Abstract:The photoluminescence properties of self- and Eu3+-activated Sr2−2xEuxNaxZnWO6 (x=0, 0.02, 0.05, 0.08, 0.1, and 0.15) compounds are investigated in this study. Due to the charge transfer transition of the (WO6)6− group, Sr2ZnWO6 has a bluish-green and broad-band emission with a peak at about 523nm when excited by 371nm light. After Sr2+ ions are partially substituted by Eu3+ ions, the red emission at about 617nm is observed except for the bluish-green emission, thus obtaining white light. The emission intensity at about 617nm is enhanced with increasing the concentration of Eu3+ (x), to achieve the maximum when x=0.1. But, the concentration quenching of Eu3+ emission appeared if x>0.1. The red emission of Sr1.8Eu0.1Na0.1ZnWO6 peaking at 617nm is investigated at various temperatures, and the process of energy transfer between the (WO6)6− group and Eu3+ ions is discussed. The results showed that Sr2−2xEuxNaxZnWO6 is a potential phosphor for full-color light emitting diode.
Europium‐Activated Perovskite Cubical SrZrO3 Red Phosphor: Synthesis, Characterization, and Sustainable Applications in PC‐LEDs and Environmental Forensic Analysis

N. Abdulkalam,G. Rajkumar,Paskalis Sahaya Murphin Kumar,Yuan‐Yao Li,S. M. M. Kennedy,Sivarasan Ganesan,V. Ponnusamy,Xinghui Liu,Huang‐Mu Lo

DOI: https://doi.org/10.1002/slct.202303518

2024-06-08

ChemistrySelect

Abstract:The manuscript explores the synthesis and characterization of Europium‐Activated Perovskite Cubical SrZrO3 Red Phosphor, focusing on its luminescent properties and potential applications. Through rigorous analysis including XRD, FTIR, UV, SEM, HR‐TEM, and PL studies, the phosphor's structure, optical behavior, and quantum efficiency were evaluated. Results show that SrZrO3 : Eu3+ emits intense red light at 612 nm when excited by 465 nm light, making it suitable for RGB‐based pc‐WLED applications. Its high thermal stability, internal quantum yield of 22 %, and excellent color purity (97.9 %) underscore its potential in lighting technology. Additionally, the phosphor's ability to emit strong red light under UV excitation makes it valuable for anti‐counterfeiting measures and latent fingerprint analysis. These findings position SrZrO3 : Eu3+ as a promising material for diverse applications, highlighting its significance in both technological and forensic domains. A series of SrZrO3 : Eu3+ nano phosphors synthesized by a modified high‐temperature solid‐state reaction method. The structural, functional vibration groups, optical, morphological, luminescence and quantum yield studies were characterized through XRD, FTIR, UV, 'SEM & HR‐TEM' and PL analyses respectively. The SrZrO3 : Eu3+ phosphor has a perovskite orthorhombic structure and emits intense red emission around 612 nm when it is excited under 465 nm and covers NUV light range. The calculated average lifetime indicates the nature of the allowed emission transition in Eu3+ (2.44 μs). The calculated colour purity and Commission International del' Eclairagethe (CIE) chromaticity coordinates are 97.9 % and (0.5894, 0.4031) respectively. The observed quantum yield and thermal stability for the SrZrO3 : Eu3+ (9 mol %) phosphor are 22 % and 87 % at 423 K, respectively. These obtained results suggest that SrZrO3 : Eu3+ (9 mol %) phosphor would meliorate for red‐emitting phosphor in profound RGB‐based pc‐WLED applications.

chemistry, multidisciplinary
Duodenal bile acids after a test meal.

O. Fausa

DOI: https://doi.org/10.1080/00365521.1974.12096876

Scandinavian Journal of Gastroenterology

Abstract:
Competitive Site Occupation toward Improved Quantum Efficiency of SrLaScO 4 :Eu Red Phosphors for Warm White LEDs

Zhiyu Yang,Gaochao Liu,Yifei Zhao,Yayun Zhou,Jianwei Qiao,Maxim S. Molokeev,Hendrik C. Swart,Zhiguo Xia

DOI: https://doi.org/10.1002/adom.202102373

IF: 9

2022-02-20

Advanced Optical Materials

Abstract:The discovery of Eu2+‐doped high‐efficiency red phosphors remains a vital challenge for white light‐emitting diode (WLED) applications. It is therefore urgent to find effective strategies managing the oxidation state to help reduce Eu3+ to Eu2+ and accordingly increase the photoluminescence quantum yield (PLQY). Herein, a new red‐emitting SrLaScO4:Eu phosphor is designed, and the PLQY is enhanced from 13% to 67% under 450 nm excitation by employing (NH4)2SO4‐assisted sintering. Combined structural analysis, optical spectroscopy, and theoretical calculation reveal that predominant Eu2+ prefers to occupy the Sr2+ sites in the SrLaScO4 enabling red emission, and a competitive site occupation of Eu3+ in La3+ can be restrained, and the reduction mechanism of Eu3+ to Eu2+ originating from the (NH4)2SO4 addition is analyzed. The fabricated WLED device using red‐emitting SrLaScO4:Eu and yellow‐emitting Y3(Al,Ga)5O12:Ce3+ exhibits a high color‐rendering index of 86.7 at a low correlated color temperature of 4005 K. This work provides a feasible reduction strategy for guiding the development of high‐efficiency Eu2+‐doped red phosphor for WLED applications. A red phosphor SrLaScO4:Eu is successfully synthesized, and the photoluminescence quantum yield (PLQY) is improved by employing (NH4)2SO4‐assisted synthesis. The improved PLQY is attributed to reducing Eu3+ to Eu2+ via a competitive site occupation. This work reveals a reduction strategy to develop Eu2+‐doped high‐efficiency red phosphor for practical applications in solid‐state lighting.

materials science, multidisciplinary,optics
Investigation of the Solid-Solution Limit, Crystal Structure, and Thermal Quenching Mitigation of Sr-Substituted Rb 2 CaP 2 O 7 :Eu 2+ Phosphors for White LED Applications

Kai Zhao,Li Yin,Zhihong Ma,Tingxuan Yang,Huidong Tang,Peng Cao,Saifang Huang

DOI: https://doi.org/10.1021/acs.inorgchem.1c03470

IF: 4.6

2022-01-10

Inorganic Chemistry

Abstract:Rb2CaP2O7:Eu2+ is a bright reddish-orange-emitting phosphor, but its luminescence thermal stability is poor. In this study, we investigated the solid-solution limit and thermal quenching mitigation of Rb2CaP2O7:Eu2+ phosphors by cation substitution with Sr2+ and revisited their crystal structure. First, we carefully investigated the solid solution limit of Sr in the structure of Rb2CaP2O7. The results show that up to 80% of Ca can be substituted by Sr, whereas Ca hardly resides in the structure of Rb2SrP2O7. Consequently, the photoluminescence was fine-tuned from reddish-orange (612 nm) to yellow (580 nm) light emission by increasing the Sr2+ concentration in the solid-solution phosphors Rb2Sr1-xCaxP2O7:Eu2+ under excitation at 342 nm. The mechanism for the blue shift of the emission spectrum was discussed. With the associated modification of the local environment of the activator (as reflected by the changes in the effective coordination number, average bond length, distortion index, and quadratic elongation), the luminescence thermal quenching issue of Rb2CaP2O7:Eu2+ was mitigated by substituting 20% Sr into the Ca site (Rb2Ca0.8Sr0.2P2O7:Eu2+). The integrated intensity of bright orange-emitting Rb2Ca0.8Sr0.2P2O7:Eu2+ (603 nm) at 150 °C retained 53% of its initial value, 1.64 times that of Rb2CaP2O7:Eu2+ (32.3%). Such an enhancement could be attributed to the improved rigidity of the crystal structure due to the local structure modification as evidenced by Rietveld refinement. The cation substitution is an effective approach for mitigating the thermal quenching issue of phosphors.

chemistry, inorganic & nuclear
Red-emitting Eu3+ activated LaSr2AlO5 phosphor for wLEDs: Crystal structure, photoluminescence, thermal stability, Judd-Ofelt calculation and band-gap analyses

Pawan Kumar,Devender Singh,Harish Kumar

DOI: https://doi.org/10.1016/j.materresbull.2024.112683

IF: 5.6

2024-05-01

Materials Research Bulletin

Abstract:Red-emitting La1-xSr2AlO5:xEu3+ (x = 0.01–0.06) phosphors have been synthesized via gel combustion (GC) approach and their structure and luminescent characteristics were analyzed in detail. The tetragonal crystal structure (I4/mcm space group) of all generated La1-xSr2AlO5:xEu3+ (x = 0.01–0.06) phosphors have been established by X-ray diffraction and rietveld analysis. The shape and size of the phosphor has been examined using transmission electron microscopy (TEM) and the estimated crystallite size was found to be 32–65 nm. Energy Dispersive X-ray (EDX) analysis confirmed the chemical composition of the synthesized materials. The diffuse reflectance spectra (DRS) were used to compute the band gap energies (Eg) of the samples which emerged to be in region of 5.373–6.009 eV. The Eu3+ activated LaSr2AlO5 phosphors produce red emissions at 579, 592, 614, 656 and 708 nm, when excited at 395 nm. These emission bands are caused by 5D0→7FJ (J = 0, 1, 2, 3, 4) electronic transitions of Eu3+ ion. The Judd-Ofelt theory further supports the performance of LaSr2AlO5:Eu3+ phosphors as a red emitting substance with high branching ratio corresponding to 5D0→7F2 transition from Eu3+ center present in the low symmetry site. Computed chromaticity coordinates (x, y) indicate a high degree of color purity in the phosphors, providing additional evidence for the presence of red emission. Temperature dependent emission (PL) spectra revealed good thermal stability of the synthesized nanophosphors with activation energy (Ea) of 0.1384 eV.

materials science, multidisciplinary
Study of optical properties of Sr10(PO4)6F2 apatite kind phosphor prepared by co-precipitation method for W-LED applications

Bawanthade, Bharti

DOI: https://doi.org/10.1007/s10854-024-12911-y

2024-06-27

Journal of Materials Science Materials in Electronics

Abstract:Sr 10 (PO 4 ) 6 F 2 doped with Eu and Dy and co-doped with Ce and Eu, is successfully synthesized by the low-temperature co-precipitation method for the first time using ammonia solution. The Rietveld refinement of the X-ray diffraction pattern confirms that it crystallized into hexagonal form and corresponds to the P63/m space group. SEM and EDS confirm that Sr 10 (PO 4 ) 6 F 2 formed with good morphology. As synthesized Sr 10 (PO 4 ) 6 F 2 :x% Eu 3+ luminescent material, it shows intense emission in the red region, while Sr 10 (PO 4 ) 6 F 2 :x% Dy 3+ shows emission in both the yellow and blue regions, which produces white emission with moderate concentration quenching approximately equal to 7 mol% and 5 mol%, respectively. The critical distance between Eu 3+ ions was determined to be 16.5878 Å and 18.56011 Å for Dy 3+ ions. From Dexter theory, we concluded that nonradiative dipole–dipole interaction is responsible for the concentration quenching effect for both activator emissions. Sr 10 (PO 4 ) 6 F 2 :7%Eu 3+ has comparatively longer lifetimes of the 7 F 0 → 5 L 6 shifts of Eu 3+ (≈3.52 ms), and Sr 10 (PO 4 ) 6 F 2 :5%Dy 3+ has an average lifetime equal to 1.42 ms for the ( 4 G 5/2 to 6 H 5/2 ) shift of Dy 3+ ions. Sr 10 (PO 4 ) 6 F 2 doped with 7% Eu 3+ has a comparatively lower band gap (3.9037 eV) than 5% Dy 3+ (3.9193 eV) obtained from the Tauc plot. The analysis of the optical characteristics of the Sr 10 (PO 4 ) 6 F 2 : Eu 3+ , Ce, and Dy 3+ phosphors proposed that this is a good candidate for applications as a red- and white-emitting luminescent material, respectively, for white LEDs and display applications.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
A novel germanate based red-emitting phosphor with high efficiency, high color purity and thermal stability for white light-emitting diodes and field emission displays

Qiang Zhang,Xicheng Wang,Yuhua Wang

DOI: https://doi.org/10.1039/c9qi01428d

IF: 7.779

2020-01-01

Inorganic Chemistry Frontiers

Abstract:A series of Eu 3+ -activated K 2 SrGe 8 O 18 phosphors for white light emitting diodes and field emission displays were developed and explored.

chemistry, inorganic & nuclear
PL Properties of Sr2CeO4 With Eu3+ and Dy3+ for Solid State Lighting Prepared by Precipitation Method

R. S. Ukare,Vikas Dubey,G. D. Zade,S. J. Dhoble

DOI: https://doi.org/10.1007/s10895-016-1765-8

2016-02-09

Journal of Fluorescence

Abstract:Photoluminescence studies of pure and Dy3+, Eu3+ doped Sr2CeO4 compounds are presented by oxalate precipitation method for solid state lighting. The prepared samples also characterized by XRD, SEM (EDS) and FTIR spectroscopy. The pure Sr2CeO4 compound displays a broad band in its emission spectrum when excited with 280 nm wavelength, which peaks centered at 488 nm, which is due to the energy transfer between the molecular orbital of the ligand and charge transfer state of the Ce4+ ions. Emission spectra of Sr2CeO4 with different concentration of Dy3+ ions under near UV radiation excitation, shows that intensity of luminescence spectra is found to be affected by Dy3+ ions, and it increases with adding some percentages of Dy3+ ions. The maximum doping concentration for quenching is found to be Dy3+ = 0.2 mol % to Sr2+ions. The observed broad spectrum from 400 to 560 nm is mainly due to CT transitions in Sr2CeO4 matrix and some fractional contribution of transitions between 4F9/2 → 6H15/2 of Dy3+ ions. Secondly the effect of Eu3+ doping at the Sr2+ site in Sr2CeO4, have been studied. The results obtained by doping Eu3+ concentrations (0.2 mol% to 1.5 mol%), the observed excitation and emission spectra reveal excellent energy transfer between Ce4+ and Eu3+. The phenomena of concentration quenching are explained on the basis of electron phonon coupling and multipolar interaction. This energy transfer generates white light with a color tuning from blue to red, the tuning being dependent on the Eu3+ concentration. The results establish that the compound Sr2CeO4 with Eu3+ = 1 mol% is an efficient “single host lattice” for the generation of white lights under near UV-LED and blue LED irradiation. The commission internationale de I’Eclairage (CIE) coordinates were calculated by Spectrophotometric method using the spectral energy distribution of prepared phosphors.

chemistry, physical, analytical,biochemical research methods
Intense Red Light Emission Of Eu3+-Doped Sr3b2sio8 For White Light-Emitting Diodes

Jianfeng Sun,Wenlin Zhang,Dezhong Shen,Jiayue Sun

DOI: https://doi.org/10.1149/2.073204jes

IF: 3.9

2012-01-01

Journal of The Electrochemical Society

Abstract:Intense red-emitting phosphors Sr3-2xEuxNaxB2SiO8 were synthesized via high-temperature solid-state reactions. The crystal structure, luminescent properties, and quantum efficiencies of the as-prepared phosphors, as well as their luminescent thermal quenching capabilities and CIE coordinates were investigated for the first time. The results indicated that Sr3-2xEuxNaxB2SiO8 phosphors could be efficiently excited by the near-ultraviolet light (394 nm) to realize a novel red luminescence corresponding to the electric dipole transition D-5(0)-F-7(2) of Eu3+ ions. Based on the theoretical calculation, the dipole-dipole interaction was dominantly involved in the mechanism of concentration quenching of Eu3+ in the phosphors, and the activation energy for thermal quenching (Delta E) was determined to be 0.214 eV. The effects of charge compensation on the luminescence behaviors of Sr3-2xEuxNaxB2SiO8, where M+ represented a monovalent cation like Li+, Na+, or K+ acting as a charge compensator, were also investigated. The composition-optimized Sr2.80Eu0.10Na0.10B2SiO8 exhibited the preferable CIE coordinates of (0.644, 0.350), whose integrated intensity was calculated to be 1.7 times of that of the commercial red phosphor Y1.90Eu0.10O2S. These results suggest that Sr3-2xEuxNaxB2SiO8 phosphors are competitive as the promising red-emitting phosphor-converted materials for white light-emitting diodes. (C) 2012 The Electrochemical Society. [DOI: 10.1149/2.073204jes] All rights reserved.
Site Occupation Engineering toward Giant Red-Shifted Photoluminescence in (Ba,Sr) 2 LaGaO 5 :Eu 2+ Phosphors

Yu Chen,Zhiyu Yang,Jiance Jin,Jianwei Qiao,Yuzhen Wang,Maxim S. Molokeev,Hendrik C. Swart,Zhiguo Xia

DOI: https://doi.org/10.1021/acs.chemmater.3c01980

IF: 10.508

2023-10-05

Chemistry of Materials

Abstract:Exploring oxide-based red-emitting phosphors is essential for improving the color rendering index (R a ) and reducing the correlated color temperature (CCT) of white-light-emitting diode (LED) lighting sources. Especially, it is challenging to design Eu2+ red emission in inorganic solids. Here, the Eu2+-activated oxide phosphor Sr2LaGaO5:Eu2+ was synthesized with red emission peaking at 618 nm under 450 nm excitation. The crystal structure and spectral analysis indicate that Eu2+ tends to occupy [Sr1/LaO8] polyhedrons with a smaller coordination number, resulting in a large crystal field splitting at the 5d level and realizing the broadband 4f–5d red emission. When Sr is substituted by Ba atoms, density functional theory calculations verify that Ba tends to enter [Sr2O10] with a large coordination number, further giving rise to the lattice distortion and a giant spectral redshift (618–800 nm). The white LED device fabricated by mixing red Sr1.8Ba0.2GaO5:Eu2+ and green Lu3Al5O12:Ce3+ phosphors exhibits a high color rendering index (R a = 92.1) and a low color-dependent temperature (CCT = 4570 K). This study will give guidance for exploring new Eu2+ activated oxide-based red phosphors as well as achieving tunable emission through cations’ substitution.

materials science, multidisciplinary,chemistry, physical
SrLaNaTeO6:Eu3+ red-emitting phosphors with high luminescence efficiency and high thermal stability for high CRI white LEDs

Yuan Wang,Zhikai Liang,Kezhou Jiang,Yifang Lin,Daomiao He,Jinhui Liu,Weixian Wang,Jingfei Wang,Bin Deng,Dan Zhang,Ruijin Yu

DOI: https://doi.org/10.1016/j.ceramint.2022.09.026

IF: 5.532

2023-01-01

Ceramics International

Abstract:A novel single-phase trivalent europium activated red-emitting SrLaNaTeO6 phosphor was first synthesized in a process of traditional high-temperature solid-state. The phase purity, morphology, and spectroscopy of the prepared phosphor were analyzed. Under 395 nm excitation, the photoluminescence (PL) spectra of the SrLaNaTeO6:Eu3+ products mainly contained five dominant sharp peaks. The intense red emission peak at 615 nm was the typical 5D0→7F2 electric dipole transition of Eu3+. The optimum product of high quenching concentration was the SrLaNaTeO6:0.90Eu3+, which reached a high internal quantum efficiency (IQE) of 90.6%. The SrLaNaTeO6:0.90Eu3+ was estimated to have R c of 6.57 Å and possessed high color purity of 100.0%. The phosphors exhibited excellent thermal stability and high activation energy (E a = 0.29 eV). The prepared white light-emitting diode (WLED) had a high color rendering index (CRI) R a of 92 and a low correlated color temperature (CCT) of 5008 K. In conclusion, the phosphors have potential as red components for WLEDs.

materials science, ceramics
Effects of Eu3+ doping on the luminescence properties of novel Sr2CaLa(VO4)3 from partial substitution of Sr2+ by Ca2+ in Sr3La(VO4)3

Lei Zhang,Xuefeng Zhang,Chaoyong Zhao,Xuan Xiao

DOI: https://doi.org/10.1016/j.ceramint.2021.08.344

IF: 5.532

2021-12-01

Ceramics International

Abstract:Eu3+-activated Sr3−x Ca x La(VO4)3 phosphors were fabricated via citric-acid-assisted sol combustion. Characterization of the Sr3−x Ca x La(VO4)3:Eu3+ samples with different concentrations of Ca2+ revealed a hexagonal crystal structure belonging to the R-3m space group. The amount of Ca2+ added (x) was controlled within 0 ≤ x ≤ 2 to yield high-purity phosphors. Scanning electron microscopy results showed that an increase in Ca2+ concentration resulted in a decrease in the particle size of Sr3−x Ca x La(VO4)3:Eu3+, with the shape gradually changing from nearly equiaxed to lath-shaped. The Sr2CaLa(VO4)3:Eu3+ phosphor (denoted as SCLVO:Eu3+) exhibited the strongest photoluminescence (PL) intensity at 618 nm among the samples under excitation of 394-nm near-UV (NUV) light. The study of Eu3+ doping concentration confirmed that Eu3+ could enter the lattice of the SCLVO matrix without altering its crystal structure. SCLVO:Eu3+ was found to strongly absorb 394 nm NUV light and 464 nm blue light. The optimal concentration of the Eu3+ dopant in the SCLVO host was 0.11, which resulted in the phosphor achieving an excellent PL intensity and a color purity of 98.68%. Tunable luminescence from the orange area (0.5280, 0.4522) of Commission Internationale de l'éclairage (CIE) to the red area (0.6313, 0.3650) was achieved by adjusting the concentration of Eu3+. Under 394 nm excitation, SCLVO:0.11Eu3+ phosphor has a quantum yield (QY) of 28.2% and excellent thermal stability with 0.383 eV activation energy. Consequently, White-light-emitting diode (WLED) based on SCLVO:0.11Eu3+ phosphor yielded a high color rendering index (CRI), low correlated color temperature (CCT), and CIE coordinates of 91.8, 5196 K, and (0.3407, 0.3612), respectively, under the 20 mA driven current. These results indicated the tremendous potential of SCLVO:0.11Eu3+ phosphors for application in WLEDs excited by NUV or blue light.

materials science, ceramics

Pathogenesis of "fibrosis" in interstitial pneumonia: an electron microscopic study.

Synthesis, structure, and luminescence properties of SrSiAl<sub>2</sub>O<sub>3</sub>N<sub>2</sub>:Eu<sup>2+</sup> phosphors for light-emitting devices and field emission displays

Governing the crystallographic sites for tuning Eu2+ emission in an apatite oxyfluoride host to be applied for superior white light emitting diodes

A single Eu2+-activated high-color-rendering oxychloride white-light phosphor for white-light-emitting diodes

Investigations on structural and optical properties of Eu3+-activated Sr2GdNbO6 double-perovskite phosphors for solid-state lighting

Warm-white-light Emission from Eu2+/Mn2+ -Coactivated NaSrPO4 Phosphor Through Energy Transfer

Surgical aspects of thoracic tuberculosis: a contemporary review--part 2.

Eu3+-Activated Sr3ZnTa2O9 single-component white light phosphors: emission intensity enhancement and color rendering improvement

Luminescence Properties of Sr2ZnWO6:Eu3+ Phosphors

Europium‐Activated Perovskite Cubical SrZrO3 Red Phosphor: Synthesis, Characterization, and Sustainable Applications in PC‐LEDs and Environmental Forensic Analysis

Duodenal bile acids after a test meal.

Competitive Site Occupation toward Improved Quantum Efficiency of SrLaScO 4 :Eu Red Phosphors for Warm White LEDs

Investigation of the Solid-Solution Limit, Crystal Structure, and Thermal Quenching Mitigation of Sr-Substituted Rb 2 CaP 2 O 7 :Eu 2+ Phosphors for White LED Applications

Red-emitting Eu3+ activated LaSr2AlO5 phosphor for wLEDs: Crystal structure, photoluminescence, thermal stability, Judd-Ofelt calculation and band-gap analyses

Study of optical properties of Sr10(PO4)6F2 apatite kind phosphor prepared by co-precipitation method for W-LED applications

A novel germanate based red-emitting phosphor with high efficiency, high color purity and thermal stability for white light-emitting diodes and field emission displays

PL Properties of Sr2CeO4 With Eu3+ and Dy3+ for Solid State Lighting Prepared by Precipitation Method

Intense Red Light Emission Of Eu3+-Doped Sr3b2sio8 For White Light-Emitting Diodes

Site Occupation Engineering toward Giant Red-Shifted Photoluminescence in (Ba,Sr) 2 LaGaO 5 :Eu 2+ Phosphors

SrLaNaTeO6:Eu3+ red-emitting phosphors with high luminescence efficiency and high thermal stability for high CRI white LEDs

Effects of Eu3+ doping on the luminescence properties of novel Sr2CaLa(VO4)3 from partial substitution of Sr2+ by Ca2+ in Sr3La(VO4)3