Prof. J. N. Langley, F.R.S

J. Barcroft

DOI: https://doi.org/10.1038/116872a0

IF: 64.8

1925-12-01

Nature

Abstract:

What problem does this paper attempt to address?

Evaluation of photoluminescence and colorimetric performance of Tb3+-induced calcium tungstate ceramic

R. Paikaray,T. Badapanda,S. Sahoo,H. Mohapatra

DOI: https://doi.org/10.1140/epjb/s10051-024-00726-z

2024-06-22

The European Physical Journal B

Abstract:Photoluminescence and colorimetric investigations of Ca 1− x Tb 2 x /3 WO 4 with x vary from 0.01 to 0.05 samples made by employing the solid-state reaction routes are represented in this paper. Structural analyses of all the phosphors are done with the help of X-ray diffraction spectroscopy and denoted that they exhibit a tetragonal structure and I4 1 /a space group without containing any secondary phase. Optical properties are described with the help of the UV–visible reflectance spectra. In addition, the energy bandgap values are evaluated from these spectra and the values are increased concerning the rise in the Tb contents in CaWO 4 . Photoluminescence studies are done by considering PL excitation spectra as well as PL emission spectra. The critical concentration of quenching is observed at the composition x = 0.03 along with the critical distance of energy transfer is computed to be ~ 20 Å. Moreover, this distance is created by the dipole–dipole exchanges and indicated by the calculated Q value. Colorimetric analyses of the samples are done from the CIE color coordinates. The green emission color is obtained for all the materials. All the colorimetric parameters are evaluated and quantum yield efficiency for x = 0.03 Tb incorporated CaWO 4 material is obtained by exciting it with 485 nm wavelength. Average lifetime values are evaluated by analyzing the PL decay plots.

physics, condensed matter
Investigation of thermoluminescence and photoluminescence properties of Tb3+, Eu3+, and Dy3+ doped NaYF4 phosphors for dosimetric applications

Preeti Padhye Kulkarni,Kishor H Gavhane,Mahesh S Bhadane,Vasant N Bhoraskar,Shailendra S Dahiwale,Sanjay D Dhole

DOI: https://doi.org/10.1039/d2cp00946c

2022-05-11

Abstract:Hexagonal phase sodium yttrium fluoride activated with lanthanide ions; Tb3+, Eu3+ and Dy3+ doped NaYF4 phosphors were synthesized using a simplistic hydrothermal method. The photoluminescence studies demonstrated green, red and blue emission lines corresponding to 5D4 → 7FJ (J = 6, 5, 4, 3), 5D0 → 7FJ (J = 1, 2 and 4) and 4F9/2 to 6HJ (J = 15/2 and 13/2) transitions, which are characteristic of Tb3+, Eu3+ and Dy3+ ions, respectively. The as-synthesized samples were subjected to annealing at varying temperatures from 500 °C to 800 °C primarily for the optimization of the thermoluminescence glow curve. Meanwhile, we studied the influence of thermal annealing treatment on the crystal phase, morphological features, and photoluminescence properties of the phosphors. The spherical-like morphology of NaYF4:Tb3+ phosphor changed to micro block-like structures and the hexagonal phase of NaYF4 transforms into a cubic phase at a higher annealing temperature of ∼800 °C. The photoluminescence emission intensity also varied at different annealing temperatures. The systematic study using different dopants and annealing temperatures was carried out to accomplish efficient thermoluminescence (TL) properties. The most suitable TL dosimetric glow peak was attained for NaYF4:0.5%Tb3+ phosphor, which was annealed at a temperature of 800 °C, located at 194 °C. The NaYF4:Tb3+ phosphor exhibited TL response fairly linear in the dose range from 1 kGy to 25 kGy of gamma radiation. The phosphor showed TL response at higher doses, which stipulates that the NaYF4:Tb3+ is reasonably well suitable for high dose measurements and respective applications. The phosphor exhibited negligible fading and good reproducibility features. Trap-level analysis and experimental determination of activation energy were performed using the Tm-Tstop technique and initial rise method (IRM). The trapping parameters of the TL glow curve, such as activation energy (E), order of kinetics (b), and frequency factor (s) were estimated by Chen's glow peak shape (PS) method and glow curve deconvolution (GCD) method. The trapping parameters obtained using the IRM, PS and GCD methods are in good accordance with each other. Henceforth, along with efficient photoluminescence properties, the NaYF4:Tb3+ phosphor exhibited favorable thermoluminescence dosimetric properties. Consequently, this study provides new opportunities for utilizing these phosphors in the area of radiation dosimetry applications such as environmental and food monitoring, space dosimetry etc.
[Risk calculator for developing glaucoma from ocular hypertension: beware of the risk of confusion].

Y. Lachkar

Journal Francais d'Ophtalmologie

Abstract:
Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+‐doped tungstate phosphors

Kiran R.,Princy A.,Masilla S. Moses Kennedy,Mohammad I. Sayyed,Vikash Mishra,Sudha D. Kamath

DOI: https://doi.org/10.1002/bio.4750

IF: 2.613

2024-05-13

Luminescence

Abstract:Reddish‐orange colour‐emitting Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) phosphors were synthesized using a high‐temperature solid‐state reaction. Comprehensive analysis showed exceptional structural integrity, near‐thermal stability, and marked optical properties. The optimized phosphor exhibited minimal optical quenching at high temperatures, making it a superior candidate for multifield applications. Ultra‐high thermally stable Ca2MgWO6:xSm3+ (x = 0.5, 0.75, 1, 1.25, and 1.5 mol%) double perovskite phosphors were synthesized through solid‐state reaction method. Product formation was confirmed by comparing the X‐ray diffraction (XRD) patterns of the phosphors with the standard reference file. The structural, morphological, thermal, and optical properties of the prepared phosphor were examined in detail using XRD, Fourier transform infrared spectra, scanning electron microscopy, diffused reflectance spectra, thermogravimetric analysis (TGA), photoluminescence emission, and temperature‐dependent PLE (TDPL). It was seen that the phosphor exhibited emission in the reddish region for the near‐ultraviolet excitation with moderate Colour Rendering Index values and high colour purity. The optimized phosphor (x = 1.25 mol%) was found to possess a direct optical band gap of 3.31 eV. TGA studies showed the astonishing thermal stability of the optimized phosphor. Additionally, near‐zero thermal quenching was seen in TDPL due to elevated phonon‐assisted radiative transition. Furthermore, the anti‐Stokes and Stokes emission peaks were found to be sensitive toward the temperature change and followed a Boltzmann‐type distribution. All these marked properties will make the prepared phosphors a suitable candidate for multifield applications and a fascinating material for further development.

chemistry, analytical
Luminescence and thermal-quenching properties of Dy³⁺-doped Ba₂CaWO₆ phosphors

Ruijin Yu,Dong Soo Shin,Kiwan Jang,Yue Guo,Hyeon Mi Noh,Byung Kee Moon,Byung Chun Choi,Jung Hyun Jeong,Soung Soo Yi

DOI: https://doi.org/10.1016/j.saa.2014.01.131

2014-05-05

Abstract:A series of new double perovskite tungstate Ba2CaWO6:xDy(3+) (0.01⩽x⩽0.15) phosphors were synthesized via solid state reaction process. XRD analysis confirmed the phase formation of Ba2CaWO6:Dy(3+) materials. The photoluminescence excitation and emission spectra, concentration effect, thermal-quenching, and decay property were investigated. The phosphor could be excited by the UV light region from 250 to 400 nm, and it exhibits blue (493 nm) and yellow (584 nm) emission corresponding to (4)F(9/2)-(6)H(15/2) transitions and (4)F9/2-(6)H13/2 transitions, respectively. The optimum dopant concentration of Dy(3+) ions in Ba2CaWO6:xDy(3+) is around 5 mol% and the critical transfer distance of Dy(3+) is calculated as 14 Å. The thermal-quenching temperature is 436 K for Ba2CaWO6:0.05Dy(3+). The fluorescence lifetime is also determined in Ba2CaWO6:0.05Dy(3+).
Versatile crystallographic and luminescence features of Tb3+ activated double perovskite Ba2BiYO6 nanophosphor for advanced indoor lighting applications

Ojas Garg,Mukesh Kumar,Hina Dalal,Poonam Devi,Neeraj Sehrawat,Diksha Solanki,Sunita Dahiya

DOI: https://doi.org/10.1007/s12648-024-03284-3

2024-06-08

Indian Journal of Physics

Abstract:A series of Tb 3+ -activated double perovskite Ba 2 BiYO 6 nanocrystal systems exhibiting a strong green luminescence is produced using an energy-saving solution combustion (SC) method. The crystals formed are found to be cubic and belong to the Fm-3 m (225) space group with irregular shapes and diameters extending from 43 to 67 nm. Morphological aspects are examined via scanning and transmission electron microscopic (SEM and TEM) techniques. When exposed to UV radiation, the nanocrystals emit a vibrant green light at a wavenumber of 18,281 cm −1 , caused by the transition from the 5 D 4 → 7 F 5 electronic state. The effects of energy transfer are also studied. The highest emission intensity was observed at a concentration of 5.0 mol% Tb 3+ ions when excited at 283 nm. This phenomenon can be attributed to the phenomenon of concentration quenching caused by d–d interactions resulting in a decrease in luminescence intensity. The color coordinates fall within the greenish region and the correlated color temperature (CCT) value is measured 5691 K for optimized sample Ba 2 BiY 0.95 Tb 0.05 O 6 . Consequently, these nanocrystals are well-suited for use in white lighting emitting diodes (WLED) manufacturing, specifically for creating aesthetically pleasing indoor lighting.

physics, multidisciplinary
Luminescent properties and energy transfer mechanism from Tb3+ to Eu3+ in color adjustable nano Ca5(PO4)3(OH): Eu3+,Tb3+ phosphors

Hongyan Zhang,Fusheng Zhu,Xiaoqin Feng,Jia Zheng,Hongsheng Huang

DOI: https://doi.org/10.1007/s10854-024-12715-0

2024-05-25

Journal of Materials Science Materials in Electronics

Abstract:Nanorod-like Ca 5 (PO 4 ) 3 (OH): xEu 3+ , yTb 3+ (x + y = 12 mol%) phosphors with multicolor tunable emission were synthesized by a facile hydrothermal method. The structure, morphology and luminescent properties of samples were studied by XRD, EDS, FT-IR, SEM, TEM and PL. The luminescent results demonstrate the existence of energy transfer between Tb 3+ and Eu 3+ in the Tb 3+ , Eu 3+ co-doped sample, and the energy transfer mechanism from Tb 3+ to Eu 3+ in the phosphors were studied. When appropriately modulating the Tb 3+ /Eu 3+ doping concentration, various emission colors can be obtained and tuned from yellow-green, yellow, and orange to red through single excitation energy.

engineering, electrical & electronic,materials science, multidisciplinary,physics, condensed matter, applied
Luminescence properties and Judd-Ofelt analysis of Tb3+ doped Sr2YTaO6 double perovskite phosphors for white LED applications

Li Wang,Yuhang Zhang,Duan Gao,Xuezhu Sha,Xin Chen,Yanqiu Zhang,Jinsu Zhang,Xizhen Zhang,Yongze Cao,Yichao Wang,Xiangping Li,Sai Xu,Hongquan Yu,Baojiu Chen

DOI: https://doi.org/10.1039/d4dt00302k

2024-04-02

Abstract:A series of Tb3+-doped Sr2YTaO6 double perovskite phosphors (SYT:Tb3+) were synthesized using a conventional solid-state reaction method. A strong green emission was observed in the SYT:Tb3+ phosphors, and the optimal doping concentration of Tb3+ was confirmed to be 5 mol%. The electric dipole-dipole interaction was ascribed to be the main mechanism for the luminescence concentration quenching. Analysis of the concentration-dependent fluorescence decay confirmed that the self-generated quenching model holds for the dynamic process of Tb3+ decays in SYT. Furthermore, the internal quantum efficiencies, non-radiative transition rates, and energy transfer rates of the 5D4 level for the SYT:Tb3+ samples were estimated, respectively. The luminescence thermal stability of the sample was also evaluated based on the Arrhenius model. The chromaticity shift of the SYT:5 mol% Tb3+ phosphor was examined to be 0.013 when the sample temperature was increased from 303 to 483 K, thus indicating excellent chromaticity shifting resistance under high temperature conditions. Moreover, the Judd-Ofelt parameters were calculated from the emission spectra of SYT:Tb3+ to be Ω2 = 0.29 × 10-20, Ω4 = 0.45 × 10-20, and Ω6 = 0.72 × 10-20 cm2, respectively. The fluorescence branching ratios and radiative transition rates for the 5D4 level were calculated based on the obtained Judd-Ofelt parameters. Finally, a white light-emitting diode (LED) prototype was assembled using a 310 nm LED chip combined with a prepared green SYT:Tb3+ phosphor and two other commercial blue and red phosphors. The obtained warm white light exhibits good chromaticity coordinates (0.32, 0.32) and a high color rendering index of 96.1. Based on the above results, it can be known that the prepared SYT:Tb3+ phosphors have a potential application as green emitting phosphors in white LEDs.
Excitation wavelength and Eu3+/Tb3+ content ratio dependent tunable photoluminescence from NaSrBO3:Eu3+/Tb3+ phosphor

A. K. Bedyal,D. D. Ramteke,Vinay Kumar,H. C. Swart

DOI: https://doi.org/10.1007/s10854-019-01533-4

2019-05-24

Abstract:A series of single doped (Eu3+ or Tb3+) and codoped (Eu3+ and Tb3+) phosphors were synthesized by solution combustion method. The single doped NaSrBO3:Tb3+ and NaSrBO3:Eu3+ emit green and red emission due to the characteristic 4f–4f transition of the Tb3+ and Eu3+ ions, respectively, under respective excitation wavelengths. Whereas, under Tb3+ excitation, the co-doped NaSrBO3:Tb3+/Eu3+ phosphors showed tunable emission upon varying the Eu3+/Tb3+ content ratio ascribed due to the energy transfer from Tb3+ to Eu3+ ions. Instead of this the emission spectrum of the codoped phosphors also exhibited strong dependence on the excitation wavelength in the range from 240 to 394 nm. The shift in the emission color (green–yellow–red) with increasing excitation wavelength, had been attributed to the presence of multiple states of Eu3+ and Tb3+ ions in the material, that become active at different excitation wavelength. The energy transfer mechanism and luminescence dynamics were investigated in the framework of the lifetime of the excited states of Eu3+ and Tb3+. The results imply that the present phosphor with multicolor emission might be promising for optoelectronic applications.
Acute respiratory infections as a risk factor for chronic airways disease.

A. Buist

DOI: https://doi.org/10.1378/CHEST.96.3_SUPPLEMENT.313S

IF: 9.6

1989-09-01

Chest

Abstract:
Effect of doping ion concentration on the photoluminescence behavior of CdWO4:Tb3+ phosphor synthesized via co-precipitation method

N. Premjit Singh,N. Ramananda Singh,N. Rajmuhon Singh,N. Mohondas Singh

DOI: https://doi.org/10.1007/s12648-018-1219-z

2018-06-29

Indian Journal of Physics

Abstract:In this paper, the photoluminescence properties of Tb3+ doped CdWO4 synthesized via co-precipitation method have been reported. The structural property of the prepared samples was determined by XRD and it was found that all the samples are crystallized in monoclinic structure without any impurity phases. The diameter of the crystallites observed from TEM studies for CdWO4:Tb3+ (5 at.%) were extended in the ranges of 10-30 nm. Photoluminescence studies exhibited a broad excitation band corresponding to the charge transfer transition between filled 2p orbital of O2− and empty 5d orbital of W6+ within the WO66− group. Upon excitation at 275 nm by UV light, the prepared samples showed a group of sharp and narrow emission peaks characteristic to the f–f transitions of Tb3+ with dominant intensity at 545 nm due to 5D4-7F5 transition. The emission intensity increases with the increase in Tb3+ concentration up to 7 at.% and then decreases upon further increase in Tb3+ concentration, which is due to concentration quenching effect. The decay time of the prepared samples were investigated in detail and the maximum life time value is found to be 1.079 ms in this study.

physics, multidisciplinary
Scintillation and dosimetric properties of Tb4O7-doped Ca2BO3Cl

Naoki Kawano,Takumi Kato,Daisuke Nakauchi,Hiroyuki Fukushima,Yuma Takebuchi,Daiki Shiratori,Takayuki Yanagida

DOI: https://doi.org/10.1007/s10854-024-13133-y

2024-07-15

Journal of Materials Science Materials in Electronics

Abstract:We synthesized calcium borate chlorides (Ca 2 BO 3 Cl) with different amounts of Tb 4 O 7 (0.1, 0.5, 1.0%), and investigated photoluminescence, scintillation, and dosimetric characteristics. Photoluminescence and scintillation owing to the electronic transition between 4f levels of Tb 3+ were observed, and the 0.1% Tb 4 O 7 -doped Ca 2 BO 3 Cl exhibited the highest intensity. Further, thermal stimulated luminescence (TSL) glow peaks appeared at approximately 90, 140, and 340 °C from the fabricated Ca 2 BO 3 Cl, and the 0.1% Tb 4 O 7 -doped Ca 2 BO 3 Cl with the largest glow peak intensity exhibited a dose response in the 10–10000 mGy range. Moreover, the fabricated Ca 2 BO 3 Cl showed optical stimulated luminescence (OSL) owing to the electronic transition between 4f levels of Tb 3+ , and three OSL exponential decay components were detected from the fabricated Ca 2 BO 3 Cl, suggesting the presence of at least three detrapping processes for OSL.

materials science, multidisciplinary,engineering, electrical & electronic,physics, applied, condensed matter
Exploration of structural and luminescent properties of Tb3+-doped Ca12Al14O33 phosphors: potential for plasma display panel technology

Vijay Singh,Yatish R. Parauha,Aadil Ahmad Bhat,S. J. Dhoble,Ji Bong Joo

DOI: https://doi.org/10.1007/s11051-024-06132-x

IF: 2.533

2024-10-02

Journal of Nanoparticle Research

Abstract:This study examines the impact of doping Tb 3 + ions into Ca 12 Al 14 O 33 to analyze its structural and luminescent properties for potential use in plasma display panels (PDPs). Phosphors were synthesized via the sol–gel method and characterized using XRD, FT-IR, SEM, and PL techniques. Morphological observations via SEM revealed micron-sized, irregularly shaped particles, outlining the distinct morphology of the material. Luminescence investigations revealed an improved energy transfer process apparent in the emission and excitation spectra. Under ultraviolet (UV) and vacuum ultraviolet (VUV) excitation, the predominant green emission at 543 nm, attributed to the 5 D 4 → 7 F 5 transition of Tb 3+ ions, exhibited optimal luminescent properties up to a Tb 3+ concentration of 0.07 mol. However, the subsequent decrease in emission intensity beyond this threshold occurred due to a concentration-quenching effect. Further analyses demonstrated vacuum photoluminescence at 147 nm and 172 nm, exhibiting robust green emissions at 543 nm associated with the 5 D 3 , 5 D 4 → 7 F J transitions inherent to Tb 3+ ions. Moreover, all samples exhibited color purity ranging from 85 to 95%. The exceptional luminescence attributes of Ca 12 Al 14 O 33 :Tb 3+ signify its potential in diverse applications. Notably, its promising applicability in PDP stems is due to its specific emission peaks and luminescent behavior. This study presents avenues for future research, emphasizing potential optimization strategies for PDP applications and exploring the properties of phosphors across various technological domains.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
[Basic personnel and equipment requirements of an intensive care unit].

F. Ahnefeld,J. Kilian

Abstract:
Luminescence Behavior and Structural Characteristics of Novel BaYAl3O7: Tb3+ Nanophosphors

Diksha Rani,Anil Kumar,Dinesh Kumar

DOI: https://doi.org/10.1007/s10895-024-04024-w

2024-11-28

Journal of Fluorescence

Abstract:An innovative green emitting novel BaY 1 − x Tb x Al 3 O 7 ( x = 0.02, 0.03, 0.04, 0.05, and 0.06) was synthesized using urea combustion, which was a low-energy process. Using techniques such as photoluminescence (PL), X-ray diffraction (XRD), transmission electron microscopy (TEM), and energy dispersive x-ray (EDX) spectroscopy, the structure and luminous properties of the phosphor were investigated. Scherrer's equation was utilized in the XRD technique to determine the crystallite size of the suggested materials. When stimulated with the near-ultraviolet photon, PL spectra revealed intense green emission at 541 nm ( 5 D 4 → 7 F 5 ). The composition with the maximum emission intensity is BaY 0.96 Tb 0.04 Al 3 O 7 . The dipole–dipole mechanism for concentration quenching events was identified with the help of the critical energy transfer distance. The non-radiative relaxation rate (276 s − 1 ), radiative lifetime (0.75754 ms), and quantum efficiency (79%), of the ideal phosphor composition are calculated using Auzel's model. The color coordinates (0.260, 0.496) align with the emission of green light. The remarkable outcomes validated the significance of the targeted nanocrystals as a superior material with prospective applications in solid-state down-converted white light-emitting diodes (WLEDs).

chemistry, physical, analytical,biochemical research methods
Long persistent luminescence and traps distribution of Tb3+ doped calcium gallium germanate

Ziqi Wang,Zhiting Wei,Na Li,Pengfei Zhang,Gangtai Zhang,Lei Zhao

DOI: https://doi.org/10.1016/j.jlumin.2020.117638

IF: 3.6

2020-12-01

Journal of Luminescence

Abstract:A new type of long persistent green luminescent phosphor Ca2Ga2GeO7: Tb3+ was prepared by high temperature solid-state reaction technique. In this paper, the crystal structure, luminescence properties and decay curves of phosphors were mainly studied. The long persistent luminescence (LPL) properties of these phosphors were characterized by LPL spectra, LPL decay curves and thermoluminescence (TL) spectra. When the ultraviolet (UV) light source was turned off, Ca2Ga2GeO7: Tb3+ phosphor exhibit typical LPL behavior for approximately 1.2 h. The green-emitting LPL was originated form the typical 5D4→7F5 transition of Tb3+ ions, and the green LPL is similar to PL. Based on the experimental results, the LPL mechanism and traps distribution of the Ca2Ga2GeO7: Tb3+ was described via TL analysis in detail.

optics
Study of Luminescence Phenomena of Tb (III) Containing Fluroquinoline for Application in Optoelectronic Devices

Poonam Kumari,Vaishnavi Lather,Arjun Malik,Pratibha Ahlawat,Rajesh Kumar

DOI: https://doi.org/10.1007/s10895-024-03989-y

2024-10-22

Journal of Fluorescence

Abstract:This study presents a series of six vivid green Tb(III) complexes, denoted by the general formula [Tb(L) 3 . secondary sensitizers ], where L represents 1-cyclopropyl-7-(4-ethylpiperazin-1-yl)-6-fluoro-4-oxoquinoline-3-carboxylic acid and secondary sensitizers consist of heterocyclic N-donor aromatic systems. The synthesis of these complexes were achieved through a solvent-assisted grinding method, and their characterization involved various techniques such as CHN analysis, FTIR, NMR, UV, XRD, and NIR spectroscopy. These analyses confirmed the successful synthesis of complexes with coordination between the quinoline moiety and the metal ion. Photoluminescence studies were conducted in solid and solution phases, revealing excellent luminescence properties. The bright green color emitted by the complexes upon exposure to UV rays was attributed to the hypersensitive 5 D 4 → 7 F 5 transition. J-O analysis indicated an asymmetrical coordination environment around in the complexes. Additionally, various radiative properties (A red , A nred , η, β exp , σ s ) and band gap values were determined, highlighting the potential applications of these complexes in diverse optoelectronic fields. Chromaticity evaluation demonstrated high color purity in both solid and solution phases. Furthermore, the CCT value identified the solid complexes as a cool light source. Overall, the analyses supported the exceptional luminosity of synthesized complexes, positioning them as promising luminescent materials for a wide range of devices.

chemistry, physical, analytical,biochemical research methods
Optically stimulated luminescence, thermoluminescence and photoluminescence characteristics of SrB4O7:Eu phosphor

Pratik R. Patankar,P. D. Sahare,Lucky Sharma,Ajay D. Vartha,Avinash R. Kachere,Prashant M. Kakade,Sanjay D. Dhole,Nandkumar T. Mandlik

DOI: https://doi.org/10.1007/s10967-024-09536-0

2024-05-26

Journal of Radioanalytical and Nuclear Chemistry

Abstract:SrB 4 O 7 :Eu 3+ (0.1–1.0 M%) phosphor materials were synthesized by solid-state diffusion method. Effects of doping concentration, annealing in oxidizing and reducing atmospheres and phase transitions on the luminescence properties of SrB 4 O 7 :Eu 3+ phosphor were investigated. Thermoluminescence (TL) study of the SrB 4 O 7 :Eu 3+ (0.2 M%) phosphor material revealed excellent properties, such as, simple glow curve (not changing its structure on irradiation for different doses), high sensitivity (3.6 times more intense than TLD-100 and approximately equal to the intensity of TLD-900), wide and linear dose response (0.5 Gy to 5.0 kGy), good reusability, etc. However, there is high TL fading, which may be occurring due to quantum tunnelling between the defects (traps/luminescence centers) related to Eu 2+ and Eu 3+ impurity ions. Dosimetry study using CW-OSL technique of SrB 4 O 7 :Eu 3+ (0.6 M%) was also explored. The phosphor shows similar dosimetry properties like linear CW-OSL dose response (100.0 Gy to 10.0 kGy) but low fading (just 20% in 60 days). Different fading patterns show that the traps involved in the luminescence processes could be different though the material exhibit two different kinds of luminescences. The phosphor material has good dosimetry properties and it could be used as potential TLD as well as OSLD phosphor for dosimetry applications.

chemistry, inorganic & nuclear, analytical,nuclear science & technology
Study of Charge Transfer Green Luminescence in Tb3+ Activated BaSrLa4O8 Nanophosphor for Advanced Indoor Lighting Applications

Manav Kaushik,Ritu Kataria,Pallavi Bhardwaj,Mukesh Kumar

DOI: https://doi.org/10.1134/s0036023624600242

2024-04-19

Russian Journal of Inorganic Chemistry

Abstract:A Tb 3+ -activated orthorhombic BaSrLa 4 O 8 nanocrystal system with good green luminescence was prepared using the energy-saving combustion method. Its crystal structure is orthorhombic, it belongs to the Pnma (162) space group, and its particle shape and diameter range from 42 nm to 66 nm. Morphological aspects were examined by scanning and transmission electron microscopies. When exposed to ultra-violet radiation, the nanocrystal emits vibrant green light with a wavenumber of 18 348 cm –1 due to the change of electronic state 5 D 0 → 7 F 2 . The effect of energy transfer is also demonstrated. The maximum emission intensity was observed at 5.0 mol % Tb 3+ concentration when excited at 281 nm. This phenomenon can be attributed to the concentration-quenched d – d interaction leading to decreased luminescence intensity. According to the chromaticity diagram, the composite color falls in the green region and the relative color temperature of the optimized sample BaSrLa 3.8 Tb 0.2 O 8 is measured at 5688 K. These nanocrystals are especially best for producing white light for advanced optoelectronic applications.

chemistry, inorganic & nuclear
Energy trapping to substitutional and charge compensation defects in persistent luminescent BaAl 2 O 4 :Tb 3+

Shivaramu N J,Elizabeth Coetsee,Jorma P.K. Holsa,H C Swart

DOI: https://doi.org/10.1088/1402-4896/ad827f

2024-10-03

Physica Scripta

Abstract:The holistic approach of the photoluminescence (PL), thermoluminescence (TL), and persistent luminescence properties at room temperature of BaAl2O4:Tb3+ were investigated in detail using a wide range of techniques. Materials were obtained using a solution combustion synthesis. The X-ray powder diffraction patterns of nondoped and Tb3+ doped BaAl2O4 indicated the hexagonal phase, and a Tb4O7 solid solution was observed at 4 and 5 mol% Tb doped aluminate. X-ray photoelectron spectroscopy revealed that Ba occupied one site and that Tbions occupied this site as Tb3+ as well as TbIV. PL emission in blue, green, and red was observed under an excitation at 228 nm, that originated from the interconfigurational 4f8–4f75d1 transitions of Tb3+. Time-of-flight secondary ion mass spectroscopy, UV-vis diffuse reflectance, and PL revealed the presence of a Cr3+ impurity. The 0.5 mol% Tb3+ doped BaAl2O4 exhibited a strong TL band at 354, 437 and 598 K, which were attributed to the traps formed by Tb3+ doping and subsequent O2- charge compensation. A persistent luminescence mechanism was constructed for the Tb3+ doped BaAl2O4.After the energy was stored in thermally liberated Tb3+ in the Ba2+ substitution sites and charge compensation defects, the Tb3+ was the source of the continuous luminescence.

physics, multidisciplinary

Prof. J. N. Langley, F.R.S

Evaluation of photoluminescence and colorimetric performance of Tb3+-induced calcium tungstate ceramic

Investigation of thermoluminescence and photoluminescence properties of Tb3+, Eu3+, and Dy3+ doped NaYF4 phosphors for dosimetric applications

[Risk calculator for developing glaucoma from ocular hypertension: beware of the risk of confusion].

Demystification of luminescence properties and the near imperceptible thermal quenching of Sm3+‐doped tungstate phosphors

Luminescence and thermal-quenching properties of Dy³⁺-doped Ba₂CaWO₆ phosphors

Versatile crystallographic and luminescence features of Tb3+ activated double perovskite Ba2BiYO6 nanophosphor for advanced indoor lighting applications

Luminescent properties and energy transfer mechanism from Tb3+ to Eu3+ in color adjustable nano Ca5(PO4)3(OH): Eu3+,Tb3+ phosphors

Luminescence properties and Judd-Ofelt analysis of Tb3+ doped Sr2YTaO6 double perovskite phosphors for white LED applications

Excitation wavelength and Eu3+/Tb3+ content ratio dependent tunable photoluminescence from NaSrBO3:Eu3+/Tb3+ phosphor

Acute respiratory infections as a risk factor for chronic airways disease.

Effect of doping ion concentration on the photoluminescence behavior of CdWO4:Tb3+ phosphor synthesized via co-precipitation method

Scintillation and dosimetric properties of Tb4O7-doped Ca2BO3Cl

Exploration of structural and luminescent properties of Tb3+-doped Ca12Al14O33 phosphors: potential for plasma display panel technology

[Basic personnel and equipment requirements of an intensive care unit].

Luminescence Behavior and Structural Characteristics of Novel BaYAl3O7: Tb3+ Nanophosphors

Long persistent luminescence and traps distribution of Tb3+ doped calcium gallium germanate

Study of Luminescence Phenomena of Tb (III) Containing Fluroquinoline for Application in Optoelectronic Devices

Optically stimulated luminescence, thermoluminescence and photoluminescence characteristics of SrB4O7:Eu phosphor

Study of Charge Transfer Green Luminescence in Tb3+ Activated BaSrLa4O8 Nanophosphor for Advanced Indoor Lighting Applications

Energy trapping to substitutional and charge compensation defects in persistent luminescent BaAl 2 O 4 :Tb 3+