Microstructure evolution and reaction mechanism of Pb(Zr1/2Ti1/2)O3-Pb(Zn1/3Nb2/3)O3–Pb(Ni1/3Nb2/3)O3 piezoelectric ceramics with plate-like PbTiO3 template

Leilei Li,Junting Liu,Shuyao Cao,Jie Xu,Changying Wu,Emilia Pawlikowska,Mikołaj Szafran,Feng Gao

DOI: https://doi.org/10.1016/j.ceramint.2020.08.154

IF: 5.532

2021-01-01

Ceramics International

Abstract:0.83 Pb(Zr1/2Ti1/2)O3-0.11Pb(Zn1/3Nb2/3)O3-0.06Pb(Ni1/3Nb2/3)O3 (PZNNT) samples with plate-like PbTiO3 (PT) template were prepared using tape casting technology. The microstructure evolution and reaction mechanism between the matrix and PT template was investigated systematically. The quench heat treatment experiment was designed and the microstructure was evaluated. The results showed that the plate-like PT template has relatively low thermal stability which would decompose to form Pb-rich liquid phase and Ti-rich region at the sintering temperature of 900 °C–1050 °C. Plate-like PT template reacted with the PZNNT matrix materials during the sintering process, which did not contribute to the grain growth orientation for PZNNT matrix. Finally, the mechanism of grain growth for the PZNNT ceramics with plate-like PT template is clarified. This work demonstrated that the thermal stability of plate-like template is one of the key factors for fabricating textured piezoelectric ceramics.

materials science, ceramics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to prepare Pb(Zr₁/₂Ti₁/₂)O₃ - Pb(Zn₁/₃Nb₂/₃)O₃ - Pb(Ni₁/₃Nb₂/₃)O₃ (PZNNT) piezoelectric ceramics by using plate - like PbTiO₃ (PT) templates, and to study their microstructure evolution and reaction mechanisms. Specifically, the researchers hope to understand the interaction between the plate - like PT templates and the PZNNT matrix materials during the sintering process and its influence on the grain growth orientation of the PZNNT matrix materials. However, the experimental results show that due to the low thermal stability of the PT templates, they will decompose to form lead - rich liquid phases and titanium - rich regions at sintering temperatures from 900 °C to 1050 °C, which causes the PT templates to react with the PZNNT matrix materials and fails to promote the grain growth orientation of the PZNNT matrix materials. Therefore, the main objective of the study is to reveal the reaction mechanism of the PT templates in the PZNNT matrix and the influence of this mechanism on the preparation of piezoelectric ceramics with specific textures.

The study evaluated the microstructure by designing quenching heat - treatment experiments and analyzed in detail the reaction process between the PT templates and the PZNNT matrix materials through technical means such as X - ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Eventually, the study found that the low thermal stability of the PT templates is one of the key factors affecting the preparation of textured piezoelectric ceramics. This finding has important guiding significance for the future selection of appropriate template materials for the successful preparation of textured piezoelectric ceramics.