Clinical experiences with the extended first dorsal metacarpal artery island flap for thumb reconstruction.

H. El-khatib

DOI: https://doi.org/10.1016/S0363-5023(98)80050-6

1998-07-01

Abstract:

What problem does this paper attempt to address?

Modeling of Short-Pulse Laser Interactions with Monolithic and Porous Silicon Targets with an Atomistic-Continuum Approach

Maria S Grigoryeva,Irina A Kutlubulatova,Stanislav Yu Lukashenko,Anastasia A Fronya,Dmitry S Ivanov,Andrey P Kanavin,Victor Yu Timoshenko,Irina N Zavestovskaya

DOI: https://doi.org/10.3390/nano13202809

2023-10-23

Abstract:The acquisition of reliable knowledge about the mechanism of short laser pulse interactions with semiconductor materials is an important step for high-tech technologies towards the development of new electronic devices, the functionalization of material surfaces with predesigned optical properties, and the manufacturing of nanorobots (such as nanoparticles) for bio-medical applications. The laser-induced nanostructuring of semiconductors, however, is a complex phenomenon with several interplaying processes occurring on a wide spatial and temporal scale. In this work, we apply the atomistic-continuum approach for modeling the interaction of an fs-laser pulse with a semiconductor target, using monolithic crystalline silicon (c-Si) and porous silicon (Si). This model addresses the kinetics of non-equilibrium laser-induced phase transitions with atomic resolution via molecular dynamics, whereas the effect of the laser-generated free carriers (electron-hole pairs) is accounted for via the dynamics of their density and temperature. The combined model was applied to study the microscopic mechanism of phase transitions during the laser-induced melting and ablation of monolithic crystalline (c-Si) and porous Si targets in a vacuum. The melting thresholds for the monolithic and porous targets were found to be 0.32 J/cm2 and 0.29 J/cm2, respectively. The limited heat conduction mechanism and the absence of internal stress accumulation were found to be involved in the processes responsible for the lowering of the melting threshold in the porous target. The results of this modeling were validated by comparing the melting thresholds obtained in the simulations to the experimental values. A difference in the mechanisms of ablation of the c-Si and porous Si targets was considered. Based on the simulation results, a prediction regarding the mechanism of the laser-assisted production of Si nanoparticles with the desired properties is drawn.
Physical Regimes and Mechanisms of Picosecond Laser Fragmentation of Gold Nanoparticles in Water from X-ray Probing and Atomistic Simulations

Anton Plech,Meike Tack,Hao Huang,Mikhail Arefev,Anna R. Ziefuss,Matteo Levantino,Hasan Karadas,Chaobo Chen,Leonid V. Zhigilei,Sven Reichenberger

DOI: https://doi.org/10.1021/acsnano.3c12314

IF: 17.1

2024-04-05

ACS Nano

Abstract:Laser fragmentation in liquids has emerged as a promising green chemistry technique for changing the size, shape, structure, and phase composition of colloidal nanoparticles, thus tuning their properties to the needs of practical applications. The advancement of this technique requires a solid understanding of the mechanisms of laser-nanoparticle interactions that lead to the fragmentation. While theoretical studies have made impressive practical and mechanistic predictions, their experimental...

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications

Enza Fazio,Bilal Gökce,Alessandro De Giacomo,Moreno Meneghetti,Giuseppe Compagnini,Matteo Tommasini,Friedrich Waag,Andrea Lucotti,Chiara Giuseppina Zanchi,Paolo Maria Ossi,Marcella Dell’Aglio,Luisa D’Urso,Marcello Condorelli,Vittorio Scardaci,Francesca Biscaglia,Lucio Litti,Marina Gobbo,Giovanni Gallo,Marco Santoro,Sebastiano Trusso,Fortunato Neri

DOI: https://doi.org/10.3390/nano10112317

IF: 5.3

2020-11-23

Nanomaterials

Abstract:Laser synthesis emerges as a suitable technique to produce ligand-free nanoparticles, alloys and functionalized nanomaterials for catalysis, imaging, biomedicine, energy and environmental applications. In the last decade, laser ablation and nanoparticle generation in liquids has proven to be a unique and efficient technique to generate, excite, fragment and conjugate a large variety of nanostructures in a scalable and clean way. In this work, we give an overview on the fundamentals of pulsed laser synthesis of nanocolloids and new information about its scalability towards selected applications. Biomedicine, catalysis and sensing are the application areas mainly discussed in this review, highlighting advantages of laser-synthesized nanoparticles for these types of applications and, once partially resolved, the limitations to the technique for large-scale applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Resonant Optical Properties of Crystalline Silicon Nanoparticles Fabricated by Laser Ablation-Based Methods

P. A. Dmitriev,D. G. Baranov,V. A. Milichko,I. S. Mukhin,Q. Li,S. Mondal,S. Makarov,A. K. Samusev,G. P. Zograf,D. A. Zuev,E. K. Makarova,M. Petrov,I. S. Sinev,M. A. Gorlach,K. S. Frizyuk,P. A. Belov

DOI: https://doi.org/10.1063/1.4998078

2017-01-01

AIP Conference Proceedings

Abstract:In this work we demonstrate resonant Raman scattering from crystalline silicon nanoparticles, fabriacted using a single stage fabrication process based on femtosecond laser ablation. Experimental and analtyical modelling shows 140-times enhancement of Raman scattering from Resonant nanoparticles, relative to their nonresonant counterparts.
Atomic-Level Modeling of A Silicon Nanofilm Irradiated by Ultrashort-Pulsed Laser Bursts

Yong Gan,J. K. Chen

DOI: https://doi.org/10.1016/j.ijthermalsci.2012.10.001

IF: 4.779

2013-01-01

International Journal of Thermal Sciences

Abstract:Atomic-level simulations of a silicon nanofilm irradiated by ultrashort-pulsed laser bursts were performed using the molecular dynamics coupled with an ultrafast energy transport model. The effects of pulse number in a laser burst and separation time between pulses on the thermomechanical response of the irradiated film were investigated. The numerical results showed that for laser bursts with an identical total energy, the more the pulses or the longer the pulse separation time, the lower the carrier temperature and number density. The same trend was also observed for the lattice temperature at the total laser fluence 0.1 J/cm(2) but 0.18 J/cm(2), as a result of the dynamical change in optical properties. It was also found that the induced thermal stress wave was weakened by increasing either pulse separation time or pulse number in a laser burst. (C) 2012 Elsevier Masson SAS. All rights reserved.
Laser-generated nanoparticles from Fe-based metallic glass in water and its amorphization control by pulsed laser processing

Shun-Xing Liang,Marlene E.R. Reusmann,Kateryna Loza,Swen Zerebecki,Lai-Chang Zhang,Zhe Jia,Sven Reichenberger

DOI: https://doi.org/10.1016/j.mtchem.2023.101544

IF: 7.613

2023-05-04

Materials Today Chemistry

Abstract:The laser synthesis and processing of colloids represents a group of scalable and "green" synthesis methods of crystalline metal oxides, that have recently made encouraging progresses in preparing amorphous as well as defect-rich nanoparticles . The relevant conditions and mechanisms that allow the design of amorphous metal oxides (AMOs) remain unknown. Consequently, in this work the synthesis of Fe-based partially amorphous oxide nanoparticles (NPs) by pulsed laser ablation in water was studied. Furthermore, both laser pulse duration and the number of laser pulse in pulsed laser fragmentation in liquid (LFL) allow a precise control of amorphization of AMOs in water. Hereby, a high-fluence nanosecond-LFL provides a significantly higher amorphization rate, whereas picosecond-LFL always presents minor fractions of crystalline α-Fe even with a higher specific energy input and laser intensity. Consequently, the laser fluence required for the repeated melting and quenching of NP appears to be the decisive parameter to control amorphization. During laser synthesis and processing of colloids, the amorphization of AMOs appears to be linked to the apparent size reduction effect, while a complete full amorphization of AMOs may be attributed to the stronger oxidation effects. This work will stimulate future studies using laser-generated AMO NPs for further functional purposes.

chemistry, multidisciplinary,materials science
Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

Brian Freeland,Ronan McCann,Paul O’Neill,Sithara Sreenilayam,Manuel Tiefenthaler,Michal Dabros,Mandy Juillerat,Greg Foley,Dermot Brabazon

DOI: https://doi.org/10.1007/s00170-021-06772-6

IF: 3.563

2021-03-12

The International Journal of Advanced Manufacturing Technology

Abstract:Nanotechnology is a significant research tool for biological and medical research with major advancements achieved from nanoparticle (Np) applications in biosensing and biotherapeutics. For laser ablation synthesis in solution (LASiS) to be chosen by researchers for Np colloid production, the process must effectively compete with chemical synthesis in terms of produced colloid quality and productivity while taking advantage of LASiS benefits in terms of its ‘green-synthesis’ and single-step functionalisation abilities. In this work, a newly developed integrated LASiS Np manufacturing system is presented including a Np flow reactor design, an at-line Np size monitoring via 180° dynamic light scattering, and a UV-Vis spectroscopy system used to estimate colloid concentration and stability. The experimental outcomes are discussed in terms of Np productivity and quality via these at-line measurements from the UV-Vis and DLS systems. The developed instrument was validated via off-line SiNps DLS, UV-Vis and morphology tests via TEM. Ultra-high quality and nanoparticle fabrication rate efficiency was achieved and is reported here.
Part I. Nanobubbles in pulsed laser fields for anticancer therapy: in search of adequate models and simulation approaches

A S Kostyukov,I L Isaev,A E Ershov,V S Gerasimov,S P Polyutov,S V Karpov

DOI: https://doi.org/10.1088/1361-6463/ac4c20

2022-02-02

Abstract:Abstract We numerically investigate the conditions for the laser-induced formation of nanobubbles in aqueous medium around plasmonic nanoparticles (NPs) bound to the malignant cell membranes that is considered as the method of their irreversible damage. We proposed employing the versatile and accessible simulation software as a research tool based on the finite volume method underlying the ANSYS Fluent package and supplemented with our user-defined functions that adapt it to solution of the stated problems. This adaptation allows to verify the model using experimental data for the same conditions. We determined the conditions for the pressure growth on the cell membrane at the initial moment of bubble formation significantly exceeding the threshold of irreversible damage. The model can be used for investigation of hydrodynamic effects accompanying irradiation of plasmonic NPs using both different types of pulsed lasers and ideally absorbing NPs with resonance in the hemoglobin spectral transparency range, as well as to uncover previously unknown effects. They include the conditions for localization of a damaging factor non-affecting the normal cells, the conditions for generation of ultrahigh pressure pulse that enables to damage the cell membrane and precedes formation of thin vapor shell around NPs, which, unlike large bubbles, requires registration using highly sensitive experimental measurements. An extensive overview of key publications summarizing the state-of-art in this area is presented.

physics, applied
Liquid-assisted laser nanotexturing of silicon: onset of hydrodynamic processes regulated by laser-induced periodic surface structures

Yulia Borodaenko,Dmitriy Pavlov,Artem Cherepakhin,Eugeny Mitsai,Andrei Pilnik,Sergey Syubaev,Stanislav O. Gurbatov,Evgeny Modin,Aleksey P. Porfirev,Svetlana N. Khonina,Aleksandr V. Shevlyagin,Evgeny L. Gurevich,Aleksandr A. Kuchmizhak

2023-08-30

Abstract:Here, upon systematic studies of femtosecond-laser processing of monocrystalline Si in oxidation-preventing methanol, we showed that the electromagnetic processes dominating at initial steps of the progressive morphology evolution define the onset of the hydrodynamic processes and resulting morphology upon subsequent multi-pulse exposure. In particular, under promoted exposure quasi-regular subwavelength laser-induced periodic surface structures (LIPSSs) were justified to evolve through the template-assisted development of the Rayleigh-Plateau hydrodynamic instability in the molten ridges forming quasi-regular surface patterns with a supra-wavelength periodicity and preferential alignment along polarization direction of the incident light. Subsequent exposure promotes fusion-assisted morphology rearrangement resulting in a spiky surface with a random orientation, yet constant inter-structure distance correlated with initial LIPSS periodicity. Along with the insight onto the physical picture driving the morphology evolution and supra-wavelength nanostructure formation, our experiments also demonstrated that the resulting quasi-regular and random spiky morphology can be tailored by the intensity/polarization distribution of the incident laser beam allowing on-demand surface nanotexturing with diverse hierarchical surface morphologies exhibiting reduced reflectivity in the visible and shortwave IR spectral ranges. Finally, we highlighted the practical attractiveness of the suggested approach for improving near-IR photoresponse and expanding operation spectral range of vertical p-n junction Si photo-detector operating under room temperature and zero-bias conditions via single-step annealing-free laser nanopatterning of its surface.

Optics,Materials Science,Applied Physics
Formation of solitary microstructure and ablation into transparent dielectric by a subnanosecond laser pulse

V. A. Khokhlov,N. A. Inogamov,V. V. Zhakhovsky,Yu. V. Petrov

DOI: https://doi.org/10.48550/arXiv.1811.11990

2018-11-29

Abstract:Laser ablation in liquid (LAL) is important technique used for formation of nanoparticles (NP). The LAL processes cover logarithmically wide range of spatiotemporal scales and is not fully understood. The NP produced by LAL are rather expensive, thus optimization of involved processes is valuable. As the first step to such optimizations more deep understanding is necessary. We employ physical models and computer simulations by thermodynamic, hydrodynamic, and molecular dynamics codes in this direction. Absorbing light metal expanding into transparent solid or liquid dielectrics is considered. We analyze an interplay between diffusion, hydrodynamic instability, and decrease of surface tension down to zero value caused by strong heating and compression transferring matter into state of overcritical fluids. The primary NPs appear during expansion and cooling of diffusion zone when pressure in this zone drops below critical pressure for a metal. Long evolution from the overcritical states to states below a critical point for a metal and down to critical point of liquid and deeply down to surrounding pressure of 1 bar is followed. Conductive heating of liquid from hot metal is significant.

Mesoscale and Nanoscale Physics,Optics
Unveiling Fundamentals of Multi-Beam Pulsed Laser Ablation in Liquids toward Scaling up Nanoparticle Production

Oleksandr Gatsa,Shabbir Tahir,Miroslava Flimelová,Farbod Riahi,Carlos Doñate-Buendia,Bilal Gökce,Alexander V. Bulgakov

DOI: https://doi.org/10.3390/nano14040365

IF: 5.3

2024-02-16

Nanomaterials

Abstract:Pulsed laser ablation in liquids (PLAL) is a versatile technique to produce high-purity colloidal nanoparticles. Despite considerable recent progress in increasing the productivity of the technique, there is still significant demand for a practical, cost-effective method for upscaling PLAL synthesis. Here we employ and unveil the fundamentals of multi-beam (MB) PLAL. The MB-PLAL upscaling approach can bypass the cavitation bubble, the main limiting factor of PLAL efficiency, by splitting the laser beam into several beams using static diffractive optical elements (DOEs). A multimetallic high-entropy alloy CrFeCoNiMn was used as a model material and the productivity of its nanoparticles in the MB-PLAL setup was investigated and compared with that in the standard single-beam PLAL. We demonstrate that the proposed multi-beam method helps to bypass the cavitation bubble both temporally (lower pulse repetition rates can be used while keeping the optimum processing fluence) and spatially (lower beam scanning speeds are needed) and thus dramatically increases the nanoparticle yield. Time-resolved imaging of the cavitation bubble was performed to correlate the observed production efficiencies with the bubble bypassing. The results suggest that nanoparticle PLAL productivity at the level of g/h can be achieved by the proposed multi-beam strategy using compact kW-class lasers and simple inexpensive scanning systems.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
3D Atomic‐Scale Dynamics of Laser‐Light‐Induced Restructuring of Nanoparticles Unraveled by Electron Tomography

Wiebke Albrecht,Ece Arslan Irmak,Thomas Altantzis,Adrian Pedrazo-Tardajos,Alexander Skorikov,Tian-Song Deng,Jessi E. S. van der Hoeven,Alfons van Blaaderen,Sandra Van Aert,Sara Bals

DOI: https://doi.org/10.1002/adma.202100972

IF: 29.4

2021-01-01

Advanced Materials

Abstract:Understanding light–matter interactions in nanomaterials is crucial for optoelectronic, photonic, and plasmonic applications. Specifically, metal nanoparticles (NPs) strongly interact with light and can undergo shape transformations, fragmentation and ablation upon (pulsed) laser excitation. Despite being vital for technological applications, experimental insight into the underlying atomistic processes is still lacking due to the complexity of such measurements. Herein, atomic resolution electron tomography is performed on the same mesoporous‐silica‐coated gold nanorod, before and after femtosecond laser irradiation, to assess the missing information. Combined with molecular dynamics (MD) simulations based on the experimentally determined 3D atomic‐scale morphology, the complex atomistic rearrangements, causing shape deformations and defect generation, are unraveled. These rearrangements are simultaneously driven by surface diffusion, facet restructuring, and strain formation, and are influenced by subtleties in the atomic distribution at the surface.
Review on experimental and theoretical investigations of the early stage, femtoseconds to microseconds processes during laser ablation in liquid-phase for the synthesis of colloidal nanoparticles

A Kanitz,M-R Kalus,E L Gurevich,A Ostendorf,S Barcikowski,D Amans

DOI: https://doi.org/10.1088/1361-6595/ab3dbe

2019-10-07

Plasma Sources Science and Technology

Abstract:Laser ablation in liquid-phase (LAL) has been developed since the 1990s, but the interest in laser synthesis of colloids has emerged in the last decade due to a significant improvement in the production rate, proven comparative advantages in biomedical and catalysis applications, and recent commercialization. However, the method relies on highly transient phenomena, so that the fundamental understanding lacks behind the LAL synthesis refinement research. The complexity of the physics and chemistry involved has led to experimental and theoretical investigations that attempt to provide a basic description of the underlying processes but face the challenge of temporal and spatial resolution as well as non-equilibrium conditions. It appears that the processes occurring at the early time scales, ranging from femtoseconds to several microseconds are critical in the definition of the final product. The review is mainly dedicated to the comprehensive description of the processes occurring at early time scales, which include the description of laser-matter interaction for ultrashort and short laser pulses, plasma formation processes as well as comparison of the measured plasma parameters at these time scales, and subsequent description of the cavitation bubble dynamics. Furthermore, the plasma and cavitation bubble chemistry are addressed, and their impact on the nanoparticle formation is emphasized.

physics, fluids & plasmas
Impact of viscosity of liquid on nanoparticles synthesized by laser ablation in liquid: An experimental and theoretical investigation

Kavil Mehta,Swetapuspa Soumyashree,Jalaja Pandya,Parul Singh,Rajesh K. Kushawaha,Prashant Kumar,Satyam Shinde,Jhuma Saha,Prahlad K. Baruah

DOI: https://doi.org/10.1007/s00339-023-06673-3

2023-05-04

Applied Physics A: Materials Science and Processing

Abstract:Pulsed laser ablation in liquid (PLAL) has gained popularity over time as an efficient method for fabrication of nanoparticles (NPs). This method depends on laser-induced dynamics at the solid–liquid interface, which is influenced by the experimental parameters. Hence, it becomes necessary to study the effect of various parameters for efficient synthesis of NPs and better control over their properties. The present study elucidates the role of liquid ambient in determining the properties of NPs. The effect of viscosity on the size of NPs is studied by conducting experiments in three liquids, viz., Distilled water (DW), propylene glycol (PG), and glycerol (GOL). This study uncovers that size of NPs significantly depends on the viscosity of liquid. The size of NPs is measured to be 35, 52, and 65 nm for DW, PG, and GOL, respectively. The dynamical processes of PLAL were probed using optical beam deflection technique with an attempt to connect the NPs size distribution to the bubble size in respective liquid. Maximum cavitation bubble radius was estimated to be 2.02, 1.85, and 1.45 mm for DW, PG, and GOL, respectively. Laser-produced craters were studied to know their effect on surface morphology. Theoretical calculation of the binding energies of PG and GOL complement the experimental results. This series of studies performed in the present work will further enhance the control over NPs during PLAL.
A simple strategy for enhanced production of nanoparticles by laser ablation in liquids

Yaakov Monsa,Gyora Gal,Nadav Lerner,Ilana Bar

DOI: https://doi.org/10.1088/1361-6528/ab78ac

IF: 3.5

2020-03-20

Nanotechnology

Abstract:Upgrading the productivity of nanoparticles (NPs), generated by pulsed laser ablation in liquid (PLAL), still remains challenging. Here a novel variant of PLAL was developed, where a doubled frequency Nd:YAG laser beam (532 nm, ∼5 ns, 10 Hz) at different fluences and for different times was directed into a sealed vessel, toward the interface of the meniscus of ethanol with a tilted bulk metal target. Palladium, copper and silver NPs, synthesized in the performed proof of concept experiments, were mass quantified, by inductively coupled plasma optical emission spectrometry, and characterized by ultraviolet-visible extinction spectroscopy, transmission electron microscopy and x-ray diffraction. The NPs consist of crystalline metals of a few nm size and their ablation rates and agglomeration levels depend on the employed laser fluences. The ensuing laser power-specific productivity curves for each metal, peaked at specific laser fluences, were fitted to the results of a simple model accounting for plasma absorption and heat transfer. The resulting peaked yields and concentrations were more than an order of magnitude higher than those obtained for totally immersed targets. Besides, the measured productivities showed nearly linear dependencies during time intervals up to 30 min of ablation, but became saturated at 1 h, due to accumulation of a significant number of NPs along the laser beam path, reducing the laser intensity reaching the target. The suggested approach that led to enhanced productivities and to generation of high concentrations of NPs in a single vessel could inspire future studies that will contribute to further developments of efficient generation of NPs with controlled characteristics.
Molecular Dynamics Simulation of the Laser Disintegration of Aerosol Particles

Tracy A. Schoolcraft,Gregory S. Constable,Leonid V. Zhigilei,Barbara J. Garrison

DOI: https://doi.org/10.1021/ac0007635

IF: 7.4

2000-09-30

Analytical Chemistry

Abstract:The mechanisms of disintegration of submicrometer particles irradiated by short laser pulses are studied by a molecular dynamics simulation technique. Simulations at different laser fluences are performed for particles with homogeneous composition and particles with transparent inclusions. Spatially nonuniform deposition of laser energy is found to play a major role in defining the character and the extent of disintegration. The processes that contribute to the disintegration include overheating and explosive decomposition of the illuminated side of the particle, spallation of the backside of large particles, and disruption of the transparent inclusion caused by the relaxation of the laser-induced pressure. The observed mechanisms are related to the nature of the disintegration products and implications of the simulation results for aerosol time-of-flight mass spectrometry are discussed. Application of multiple laser pulses is predicted to be advantageous for efficient mass spectrometry sampling of aerosols with a large size to laser penetration depth ratio.

chemistry, analytical
Liquid‐Assisted Laser Nanotexturing of Silicon: Onset of Hydrodynamic Processes Regulated by Laser‐Induced Periodic Surface Structures

Yulia Borodaenko,Dmitriy Pavlov,Artem Cherepakhin,Eugeny Mitsai,Andrei Pilnik,Sergey Syubaev,Stanislav O. Gurbatov,Evgeny Modin,Aleksey P. Porfirev,Svetlana N. Khonina,Aleksandr V. Shevlyagin,Evgeny L. Gurevich,Aleksandr A. Kuchmizhak

DOI: https://doi.org/10.1002/admt.202301567

IF: 6.8

2024-03-10

Advanced Materials Technologies

Abstract:Self‐organization driven by femtosecond‐laser texturing of crystalline Si in oxidation‐preventing methanol allows to create diverse anti‐reflective surface morphologies controlled by laser processing parameters. Electromagnetic processes dominating at initial steps of the progressive grating‐type morphology evolution define the onset of the hydrodynamic processes and resulting random spiky morphology upon subsequent multi‐pulse exposure. Upon systematic studies of femtosecond‐laser processing of monocrystalline Si in oxidation‐preventing methanol, it is shown that the electromagnetic processes dominating at initial steps of the progressive morphology evolution define the onset of the hydrodynamic processes and morphology upon subsequent multi‐pulse exposure. Under promoted exposure quasi‐regular subwavelength laser‐induced periodic surface structures (LIPSSs) are justified to evolve through the template‐assisted development of the Rayleigh‐Plateau hydrodynamic instability in the molten ridges forming quasi‐regular patterns with a supra‐wavelength periodicity and preferential alignment along polarization direction of the incident light. Subsequent exposure promotes fusion‐assisted morphology rearrangement resulting in a spiky surface with random orientation, yet constant inter‐structure distance correlated with initial LIPSS periodicity. Along with the insight onto the physical picture driving the morphology evolution and supra‐wavelength nanostructure formation, this experiments also demonstrated that resulting quasi‐regular and random spiky morphology can be tailored by the intensity/polarization distribution of incident laser beam allowing on‐demand surface nanotexturing with diverse hierarchical surface morphologies exhibiting reduced reflectivity at visible and shortwave‐IR wavelengths. Finally, the practical attractiveness of the suggested approach for improving near‐IR photoresponse and expanding operation spectral range of vertical p‐n junction Si photodetector operating under room temperature and zero‐bias conditions via single‐step annealing‐free nanopatterning is highlighted.

materials science, multidisciplinary
Plume Dynamics During Film and Nanoparticles Deposition by Pulsed Laser Ablation

M Han,YC Gong,JF Zhou,CR Yin,FQ Song,N Muto,T Takiya,Y Iwata

DOI: https://doi.org/10.1016/s0375-9601(02)01116-7

IF: 2.707

2002-01-01

Physics Letters A

Abstract:The gas dynamics of pulsed laser ablation of silicon target in the helium as ambient is investigated via direct simulation Monte Carlo method with a real physical scale of target-substrate configuration. A shock driven process is clearly observed. It is shown that the interaction of the shock front with the target surface and the vapor front induce significant backward flux of ablated particles and oscillating behavior of vapor front. A confined layer mixed with high density Si and He atoms is formed around the contact front. Its behavior is important to the nanoparticle formation and deposition. (C) 2002 Elsevier Science B.V. All rights reserved.
Investigation Of Bubble Dynamics In Different Solvents For Nanomaterial Fabrication By Laser Ablation In Liquid

Leyun Shen,Ying Shi,Zhen Yang,Kai Liu,Yi Wei,Jun Chen

DOI: https://doi.org/10.1051/epjap/2019180336

2019-01-01

Abstract:Laser ablation in liquid (LAL) is one of the important technologies for preparing nanomaterials. In this article, Al nanoparticles (NPs) are fabricated by laser ablation in three different organic solvents. The thermodynamic properties within the bubble are studied using ultrafast camera and an analytical model based on Rayleigh-Plesset equation. Combined with the NPs characterization, the correlation between the bubble dynamics and the formation of NPs is discussed. The results show that complex physical and chemical reactions inside the bubble affect the bubble dynamics. At the same time, the bubble dynamics in turn affect the morphology and properties of the nanoproducts.
Numerical Investigation of the Kinetics of Non-Equilibrium Phase Transitions in Silicon Induced by an Ultra-Short Laser Pulse

Dmitry S Ivanov,Tatiana E Itina

2024-11-15

Abstract:Modern semiconductor applications demand precise laser processing at the nanometer scale, requiring a detailed understanding of phase transitions and structural modifications. Accurate control over laser-induced processes in semiconductors is essential for generating surface structures and modifying surface properties. In this study, we present a numerical investigation of non-equilibrium laser-induced phase transitions in silicon (Si) using a hybrid atomistic-continuum model. The model combines the strengths of Molecular Dynamics (MD) simulations for atomisticscale descriptions of non-equilibrium phase transitions with a continuum approach to account for laser-generated free carriers. This framework captures the generation and diffusion of electronhole pairs, thermal diffusion, and electron-phonon coupling during laser energy deposition. We apply the model to determine the melting depth as a function of fluence for a 100 fs laser pulse at 800 nm. The results show that the stand-alone continuum approach underestimates the melting threshold compared to the hybrid atomistic-continuum model, which incorporates the detailed kinetics of melting. Additionally, we explore the effect of crystal orientation on melting dynamics. Lastly, the MD model is used to identify the conditions leading to the amorphization of the Si surface. These findings provide valuable insights into experimental observations of Si surface structuring induced by ultrashort laser pulses.

Materials Science

Clinical experiences with the extended first dorsal metacarpal artery island flap for thumb reconstruction.

Modeling of Short-Pulse Laser Interactions with Monolithic and Porous Silicon Targets with an Atomistic-Continuum Approach

Physical Regimes and Mechanisms of Picosecond Laser Fragmentation of Gold Nanoparticles in Water from X-ray Probing and Atomistic Simulations

Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications

Resonant Optical Properties of Crystalline Silicon Nanoparticles Fabricated by Laser Ablation-Based Methods

Atomic-Level Modeling of A Silicon Nanofilm Irradiated by Ultrashort-Pulsed Laser Bursts

Laser-generated nanoparticles from Fe-based metallic glass in water and its amorphization control by pulsed laser processing

Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

Part I. Nanobubbles in pulsed laser fields for anticancer therapy: in search of adequate models and simulation approaches

Liquid-assisted laser nanotexturing of silicon: onset of hydrodynamic processes regulated by laser-induced periodic surface structures

Formation of solitary microstructure and ablation into transparent dielectric by a subnanosecond laser pulse

Unveiling Fundamentals of Multi-Beam Pulsed Laser Ablation in Liquids toward Scaling up Nanoparticle Production

3D Atomic‐Scale Dynamics of Laser‐Light‐Induced Restructuring of Nanoparticles Unraveled by Electron Tomography

Review on experimental and theoretical investigations of the early stage, femtoseconds to microseconds processes during laser ablation in liquid-phase for the synthesis of colloidal nanoparticles

Impact of viscosity of liquid on nanoparticles synthesized by laser ablation in liquid: An experimental and theoretical investigation

A simple strategy for enhanced production of nanoparticles by laser ablation in liquids

Molecular Dynamics Simulation of the Laser Disintegration of Aerosol Particles

Liquid‐Assisted Laser Nanotexturing of Silicon: Onset of Hydrodynamic Processes Regulated by Laser‐Induced Periodic Surface Structures

Plume Dynamics During Film and Nanoparticles Deposition by Pulsed Laser Ablation

Investigation Of Bubble Dynamics In Different Solvents For Nanomaterial Fabrication By Laser Ablation In Liquid

Numerical Investigation of the Kinetics of Non-Equilibrium Phase Transitions in Silicon Induced by an Ultra-Short Laser Pulse