Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Beam dynamics optimization design of Rhodotron electron accelerator based on genetic algorithm and sensitivity analysis

Optimum Design of Electron Gun for 0.22-Thz Traveling Wave Tubes

Dynamics Study of the Rhodotron Accelerator

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

The optimization for the conceptual design of a 300 MeV proton synchrotron

Optimization study for RF cavity and beam dynamics simulation in the electron linear accelerator using the multi-objective genetic algorithm

Start-to-end Modeling and Transmission Efficiency Optimization for a Cyclotron-Based Proton Therapy Beamline

Error analysis study for electron linear accelerator optimized using multi-objective genetic algorithm

Beam Dynamic Design and Study of a Linac with Variable Output Energy for an AB-BNCT Facility

The Design of a High-Intensity Deuteron Radio Frequency Quadrupole Accelerator

Conceptual Design of the Cylindertron, A New Electron Accelerator

Efficient optimization of an accelerator neutron source for neutron capture therapy using genetic algorithms

Evolutionary genetic optimization of the injector beam dynamics for the ERL test facility at IHEP

Design and beam dynamics simulation of an 8 MeV compact accelerator-driven neutron source

Beam Dynamics Optimization of Very-High-frequency Gun Photoinjector

Design, Fabrication, and Testing of an X-band 9-Mev Standing-Wave Electron Linear Accelerator

Physical Design of A 10 Mev Linac for Polymer Radiation Processing

Using the Multirhodotron as an Advanced Rhodotron

Design of a 162.5 MHz Superconducting Radio-Frequency Quadrupole for High-Intensity Proton Acceleration

BEAM DYNAMICS DESIGN AND ERROR STUDY OF THE 5mev RFQ

Beam dynamics study of the high-power electron beam irradiator using niobium-tin superconducting cavity