Abstract:The effects of adding graphene to a polyetherimide matrix at various temperatures on its thermal conductivity were investigated by a series of molecular dynamics simulations within the framework of response surface methodology. In this work, an I‐optimal response surface model was used to systematically investigate the effects of graphene (Gr) content (Factor A; 0–10 wt%), temperature (Factor B; 0–200°C), and Gr layer structure (Factor C; monolayer versus five‐layer) on the thermal conductivities of PEI/Gr nanocomposites, which were determined using reverse non‐equilibrium molecular dynamics (RNEMD) simulation with the Müller‐Plathe algorithm. Based on a reduced quadratic model that was fit to the data, the effect of Factor A on thermal conductivity was found to be more pronounced for the PEI/Gr nanocomposite with the five‐layer Gr structure. Moreover, Factor B had expectedly the largest effect on thermal conductivity, followed by Factor C. However, these two factors were involved in significant interactions with Factor A. Based on numerical optimizations, the predicted thermal conductivities of the PEI/Gr nanocomposites varied from 0.057 (minimum) to 0.174 W m−1 K−1 (maximum). Overall, the maximum thermal conductivity of the PEI/Gr nanocomposite may be obtained at any given temperature in the range of 0–200°C by the addition of multi‐layer Gr (a cheaper alternative to monolayer Gr) at a content of 10 wt%. For example, the addition of 10 wt% five‐layer Gr to PEI at room temperature (25°) results yields an increase in its thermal conductivity of about 30%. Also, going from 0 to 100°C, an increase of about 76% is predicted for the thermal conductivity of the PEI/Gr nanocomposite containing 10 wt% five‐layer Gr. The results of this study shed light on the interactions between the three investigated factors. Highlights Thermal conductivities of polyetherimide/graphene (PEI/Gr) nanocomposites simulated. Graphene (Gr) content, temperature, and Gr layer structure affected the thermal behavior. Response surface methodology (RSM) aided in the identification of factorial interactions. Numerical optimization of the thermal conductivities enabled by a predictive model.

Heat transfer mechanism in graphene reinforced PEEK nanocomposites

Heat transfer during melting of graphene-based composite phase change materials heated from below

Thermal conductivity and mechanical properties enhancement of CF / PPBESK thermoplastic composites by introducing graphene

Enhanced in-plane thermal conductivity of polyimide-based composites via in situ interfacial modification of graphene

The Liquid-Exfoliation of Graphene Assisted with Hyperbranched Polyethylene-G- Polyhedral Oligomeric Silsesquioxane Copolymer and Its Thermal Property in Polydimethylsiloxane Nanocomposite

Effect of graphene nanoplatelets relative size and polyethylene chain length on the enhancement of thermal conductivity of their composite

Thermal conductivity of graphene-based polymer nanocomposites

Effect of graphene and carbon-nitride nanofillers on the thermal transport properties of polymer nanocomposites: A combined molecular dynamics and finite element study

Synergistic effects of graphene nanoparticles on the thermomechanical properties of PEEK-HNTs nanocomposites

mechanical properties of CNT / PEEK nanocomposites

A systematic molecular dynamics study of the thermal conductivities of polyetherimide/graphene nanocomposites using response surface methodology

Wear resistant PEEK composites with great mechanical properties and high thermal conductivity synergized with carbon fibers and h‐BN nanosheets

Thermal conductivity of 3d graphene filled polymer composite

Engineering the Mechanical Properties of CNT/PEEK Nanocomposites

Thermal Conductivity of the Graphene/Polydimethylsiloxane Composite by Manipulating the Network Structure

Comprehensive Enhancement in Thermomechanical Performance of Melt-Extruded PEEK Filaments by Graphene Incorporation

Superior effect of edge relative to basal plane functionalization of graphene in enhancing polymer-graphene nanocomposite thermal conductivity-A combined molecular dynamics and Greens functions study

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups

Molecular Dynamics Simulation and Experimental Study of the Mechanical and Tribological Properties of GNS-COOH/PEEK/PTFE Composites

Significant Enhancement of Thermal Conductivity in Graphite/polyester Composite Via Interfacial Π–π Interaction

Vertically Aligned and Interconnected Graphite and Graphene Oxide Networks Leading to Enhanced Thermal Conductivity of Polymer Composites