Abstract:With the rapid progress of brain-computer interfaces (BCls), miniaturized wireless implants have been investigated as an alternative to traditional cable-based neural interfaces. Simultaneous massive-channel recording capability is essential to study cellular interconnections and network properties that arise from synchronized cellular activity. Meanwhile, the battery-free techniques based on wireless power transfer (WPT) and backscatter communication help to miniaturize the neural-recording implant by battery eliminating and antenna sharing [1]. To merge a large number of channels into a single battery-free chip, there are two conventional topologies (Fig. 31.4.1, left): 1) The wireless system used multiple analog front-ends (AFEs) for signal acquisition and merges the signals before a single analog-to-digital converter (ADC) [2–4]. Even with shared ADC circuits, it still consumes high power and chip area, such as $50\mu\mathrm{W}$ power/channel and 0 $32\text{mm}^{2}$ area/channel in [4]. 2) Multiple channels are merged before the AFE, and then both the power consumption and chip area can be further reduced by sharing the AFE and ADC. However, the input impedance will be pulled down with increasing multiplexed channel numbers, leading to significant signal attenuation. $\ln$ both conventional structures, the radio sends the merged data to an external reader in real time, where the high throughput leads to power-hungry communication circuits [3–6]. As a result, the prior battery-free neural-recording chips can only support simultaneous recording of less than 16 channels [2–6] or a low bandwidth such as $500\text{Hz}$ [1].

A Wireless, Mechanically Flexible, 25μm-Thick, 65,536-Channel Subdural Surface Recording and Stimulating Microelectrode Array with Integrated Antennas

31.4 A 128-Channel 2mmx2mm Battery-Free Neural Dielet Merging Simultaneous Multi-Channel Transmission Through Multi-Carrier Orthogonal Backscatter

High-Density, Actively Multiplexed μECoG Array on Reinforced Silicone Substrate

A MEMS-based Flexible Electrode Array Using Composite Substrate

Cmos Microelectrode Array For Signal Recording And Stimulating Of Neurons Assemble

A 32-channel fully implantable wireless neurosensor for simultaneous recording from two cortical regions

Wafer-Scale Fabrication and Assembly Method of Multichannel Microelectrode Arrays for ECoG Application

A 1280-Channel Neural Microelectrode Array with Complementary Wedge-Shaped 3D Assembly Interfaces

Implantable Subdural Electrode Arrays for Neural Recordings Based on MEMS Technologies

A PDMS-Based Conical-Well Microelectrode Array for Surface Stimulation and Recording of Neural Tissues

High-Density Neural Microelectrode Arrays With Complementary Wedge-Shaped 3d Assembly Interfaces For Brain Activity Recording

Distributed implantation of a flexible microelectrode array for neural recording

A Mems-Based Flexible High-Density Brain Electrode For Multi-Modal Neural Encoding/Decoding

A flexible protruding microelectrode array for neural interfacing in bioelectronic medicine

Stable, chronic in-vivo recordings from a fully wireless subdural-contained 65,536-electrode brain-computer interface device

A wireless implantable multichannel digital neural recording system for a micromachined sieve electrode

A High-Density Drivable Microelectrodes Array for Multi-Brain Recording

A Multi-Channel, Flex-Rigid ECoG Microelectrode Array for Visual Cortical Interfacing

Multi-Channel Flexible Microneedle Electrode Array(MNEA) for High-Density Surface EMG Recording

A 256x256 CMOS Microelectrode Array for Extracellular Neural Stimulation of Acute Brain Slices.

Microelectrode array for bioelectrical signal stimulation and recording