Abstract:Pyrolysis of biomass residues into biochar is seen as a feasible way to mitigate climate change by biological carbon storage (carbon dioxide removal, CDR) and to substitute fossil fuel with sustainable biofuel. This study applies a combination of flash and ramp heating pyrolysis, and organic petrography to investigate the hydrocarbon (biofuel) potential and biochar stability and morphotypes of eight brown, red, and green macroalgal species of different tissue complexity. The carbon stability of biochar derived from macroalgae has not previously been assessed using organic petrography (reflectance measurements) and evaluated in the context of the geological carbon cycle. The biochar, hydrocarbon, and CO + CO 2 yields vary due to different chemical composition of the macroalgal species, but the product yield variations are not related to the brown, red, or green macroalgal groups. The total biofuel yield shows an inverse trend with biochar yield. A slower heating rate produces more biochar and higher CO + CO 2 and lower biofuel yields than the combined flash pyrolysis and faster heating rate. The morphotype composition of the biochar was qualitatively examined by reflected light microscopy while carbon stability was assessed by random reflectance (R o ) measurements. The diverse morphotype compositions observed in biochar formed under similar pyrolysis conditions likely stem from variations in the original algal composition. While some biochar samples show morphologies resembling the original macroalgal structure, porous morphotypes predominantly characterize the biochar samples overall. Despite a maximum pyrolysis production temperature (PT) of 650 °C, the highest mean R o value among all biochar samples is 2.91%, corresponding to a carbonization temperature (CT) of 526 °C. This observation tentatively suggests the less lignocellulosic structure of the macroalgae compared to terrigenous biomass. Four biochar samples have their entire R o distribution range above the inertinite benchmark (IBR o 2%) of R o = 2% indicating high carbon stability. Conversely, the remaining four biochar samples exhibit R o distributions extending below IBR o 2%, indicating the presence of a carbon fraction with lower long-term stability in soil. The statistically significant inverse relationship observed between the mean R o values and the peak hydrocarbon generation temperature (T max ) can be attributed to the behavior of residual macromolecules within the biochar. When these macromolecules reach peak biofuel generation at a lower temperature, they undergo carbonization over a more extended time interval during pyrolysis. Consequently, this prolonged exposure to the pyrolysis process leads to higher degrees of carbonization, as reflected by higher R o values. In conclusion, the findings from pyrolysis and organic petrographic reveal: (1) Macroalgae demonstrate potential for biofuel production, although biofuel yields contingent upon both the species of macroalgal and the heating rate employed, and (2) This study documents for the first time that flash+ramp pyrolysis of macroalgae yields biochar suitable for long-term carbon storage. However, both the carbon stability inferred from R o frequency distributions and biochar yields show variations across different macroalgal species and heating rate.

Optimization of biochar production from greywater grown polyculture microalgae using microwave pyrolysis

Food waste biochar: a sustainable solution for agriculture application and soil–water remediation

Fast Pyrolysis of Microalgae Remnants in a Fluidized Bed Reactor for Bio-Oil and Biochar Production

Production and utilization of the Chlorella vulgaris microalgae biochar as the fuel pellets combined with mixed biomass

Catalytic microwave torrefaction of microalga Chlorella vulgaris FSP-E with magnesium oxide optimized via taguchi approach: A thermo-energetic analysis

Evaluating the combined influence of microwave-enhanced alkali pretreatment and copyrolysis on characteristics of biochars produced by thermal and microwave pyrolysis

Influence of hydrothermal carbonization conditions on the porosity, functionality, and sorption properties of microalgae hydrochars

Upcycling crab shell waste into biochar for treatment of palm oil mill effluent via microwave pyrolysis and activation

Optimal Co-pyrolysis of municipal sewage sludge and microalgae Chlorella Vulgaris: Products characterization, synergistic effects, mechanism, and reaction pathways

Applying microwave vacuum pyrolysis to design moisture retention and pH neutralizing palm kernel shell biochar for mushroom production

Production of microalgal biochar and reducing sugar using wet torrefaction with microwave-assisted heating and acid hydrolysis pretreatment

Importance of pyrolysis programs in enhancing the application of microalgae-derived biochar in microbial fuel cells

Optimization of Vertical Fixed-Bed Pyrolysis for Enhanced Biochar Production from Diverse Agricultural Residues

Comparing Physicochemical Properties and Sorption Behaviors of Pyrolysis-Derived and Microwave-Mediated Biochar

Optimization of process and properties of biochar from cabbage waste by response surface methodology

Unveiling the microwave heating performance of biochar as microwave absorber for microwave-assisted pyrolysis technology

Value-added biochar production from microwave pyrolysis of peanut shell

State of art review on conventional and advanced pyrolysis of macroalgae and microalgae for biochar, bio-oil and bio-syngas production

Biowaste-to-biochar through microwave-assisted wet co-torrefaction of blending mango seed and passion shell with optoelectronic sludge

Pyrolysis of macroalgae: Insight into product yields and biochar morphology and stability

Bioethanol production from acid pretreated microalgal hydrolysate using microwave-assisted heating wet torrefaction