Abstract:Transition metal oxide catalysts had the limitation of a slow electron transfer rate in activating peroxymonosulfate (PMS) during wastewater treatment. In this work, we developed a novel copper bismuthate (CuBi2O4) anode using a catalyst drop casting method to efficiently activate PMS through electrochemically induced metal-oxygen bonds for herbicide prometon (PMT) degradation. The PMT removal rate in the EC/CuBi2O4 anode/PMS system was 74.60 %, which was much greater than the simple superposition of CuBi2O4 catalyst-activated PMS alone (4.88 %) and FTO anode electrically activated PMS (32.15 %). The CuBi2O4 fixed on the anode surface accelerated the electron transfer efficiency between the interface employing the electric field, showing stronger PMS activation performance than the equivalent three-dimensional particle electrode system. The free radical quenching experiments illustrated that the degradation of PMT mainly proceeded through the free radical oxidation pathway dominated by SO4 center dot- and center dot OH. In the EC/CuBi2O4 anode/PMS system, the traditional Cu+/Cu2+ cycle did not dominate the activation of PMS in the CuBi2O4 anode reaction. Raman experiment and open circuit potential results proved that the introduction of an electric field caused PMS to form the metal-oxygen bond Cu(II)-SO5 center dot- at the CuBi2O4 anode interface, and converted it into activated state PMS (PMS*), accelerating the interface electron transfer. The PMS* was more readily further activated by electrons and promoted water dissociation to form center dot OH for pollutants degradation. The EC/CuBi2O4 anode/PMS system manifested stable purification performance for COD and emerging pollutants in high-salt pesticide wastewater, coupled with its superior economic benefits, possessing broad application prospects.

In situ electrogenerated Cu(III) triggers hydroxyl radical production on the Cu-Sb-SnO2 electrode for highly efficient water decontamination

Cu/Mn-mediated electron shuttle and high-valent metals enhance hydroxyl radicals production during the electrochemical oxidation on the CuMn-Sb-SnO 2 electrode

Cu/Mn-mediated Electron Shuttle and High-Valent Metals Enhance Hydroxyl Radicals Production During the Electrochemical Oxidation on the CuMn-Sb-SnO2 Electrode

Novel Three-Dimensional Electrochemical Reactor with P and N-Codoped Activated Carbon for Water Decontamination: High Efficiency and Contribution of Singlet Oxygen

A Novel CuFe-Sb-SnO2 Anode for Efficient Degradation of Ciprofloxacin by Enhancing Hydroxyl Radical Production: Key Role of Cu/Fe in Accelerating Electron Transfer

Electrogenerated Quinone Intermediates Mediated Peroxymonosulfate Activation Toward Effective Water Decontamination and Electrode Antifouling

Intramolecular generation of endogenous Cu(III) for selectively self-catalytic degradation of Cu(II)-EDTA from wastewater by UV/peroxymonosulfate

Oxygen-vacancy-enriched Substrate-Less SnOx/La-Sb Anode for High-Performance Electrocatalytic Oxidation of Antibiotics in Wastewater

Single-Atom Copper Promotes Efficient Generation of Hydroxyl Radicals under Alkaline Circumstances in a Photoelectrochemical Oxygen Reduction Process

Boosting the O2-to-H2O2 Selectivity using Sn-doped Carbon Electrocatalysts: Towards Highly Efficient Cathodes for Actual Water Decontamination

Efficient Degradation of Organic Contaminants by Activated Permanganate with Metal Sulfides: in Situ Generation of Mn(III)

Synthesis of H2O2 to Self-Catalyzed Generation of •OH over ZnO/CuI/Cu Foam Electrode for the Self-Fenton Cleaning of Wastewater

Cost-effective Degradation of Pollutants by In-Situ Electrocatalytic Process on Fe@BN-C Bifunctional Cathode: Formation of 1O2 with High Selectivity under Nanoconfinement

Electrochemically-induced Metal–oxygen Bond Cu(II)- SO5− on Novel CuBi2O4 Anode for Efficient Peroxymonosulfate Activation

Theory-guided unraveling of the mechanism underlying Cu1.0/Mn1.0-ZnO with dual reaction centers for enhanced peroxymonosulfate activation

A facile electroless preparation of Cu, Sn and Sb oxides coated Ti electrode for electrocatalytic degradation of organic pollutants

Highly Stable and Efficient Sb Doped Ti/Ruo2-Iro2-Sno2 Electrode Toward Organic Pollutants Degradation by in Situ Generated Oxidizing Species

Low-consumption water purification: Trace H2O2 triggering H2O2 generation through pollutant utilization on non-equilibrium ZnS surface

Regulating the Electronic Structure of Cu Single-Atom Catalysts toward Enhanced Electro-Fenton Degradation of Organic Contaminants via 1O2 and •OH

Unique Electrochemical System for in Situ SO4− Generation and Pollutants Degradation

Enhanced performance of an Al-doped SnO2 anode for the electrocatalytic oxidation of organic pollutants in water