Abstract:Sodium-metal batteries (SMBs) are considered a promising alternative to lithium-metal batteries due to their high-energy density, low cost, and good low-temperature performance. However, the serious side reactions and dendrites growth during the process of sodium ions deposition/stripping are the bottleneck that inhibits the further capitalization of SMBs, especially at low temperatures. Herein, a porous framework of 50 mu m thickness composite gel-polymer-electrolyte (GPE) supported by polyvinylidene difluoride nanowires membrane and Na3Zr2Si2PO12 ceramic particles is proposed to tackle the issues. This GPE not only has high ionic conductivity but also can promote the uniform transportation of sodium ions to form a stable and dense metal-GPE interfacial layer, which can effectively inhibit the side reactions and dendrites growth in a wide temperature range. The assembled Na//GPE//Na3V2(PO4)3 full battery provides a specific capacity of 100 mAh g-1 at 10 C for more than 3000 cycles calendar life at room temperature. Moreover, the full battery based on this GPE has an extraordinary performance at low temperatures, reaching a specific capacity of 93 and 61 mAh g-1 at 0.5 and 1 C at -20 degrees C, respectively. This work provides a reliable solution for low-temperature applications of high-energy density and long-cycle life SMBs. Sodium-metal batteries (SMBs) are considered a promising alternative to lithium-metal batteries due to their high-energy density, low cost, and good low-temperature performance. A porous framework of 50 mu m thickness composite gel-polymer-electrolyte (GPE) supported by polyvinylidene difluoride nanowires membrane and Na3Zr2Si2PO12 ceramic particles is proposed to improve the electrochemical performance of SMBs. This GPE not only has high ionic conductivity but also can promote the uniform transportation of sodium ions to form a stable and dense metal-GPE interfacial layer, which can effectively inhibit the side reactions and dendrite growth in a wide temperature range. The assembled Na//GPE//Na3V2(PO4)3 full battery provides a specific capacity of 100 mAh g-1 at 10 C for more than 3000 cycles calendar life at room temperature. Moreover, the full battery based on this GPE has an extraordinary performance at low temperatures, reaching a specific capacity of 93 and 61 mAh g-1 at 0.5 and 1 C at -20 degrees C, respectively. This work provides a reliable solution for low-temperature applications of high-energy density and long-cycle life SMBs.image

Single-Ion Conducting Polymer Electrolyte for Superior Sodium-Metal Batteries

High‐Capacity All‐Solid‐State Sodium Metal Battery with Hybrid Polymer Electrolytes

Polyanion‐Induced Single Na‐Ion Polymer Electrolytes for Ultra‐Stable Sodium Metal Batteries

Towards stable sodium metal battery with high voltage output through dual electrolyte design

A composite electrolyte based on aluminum oxide filler/polyester polymer via in situ thermal polymerization for long-cycle sodium metal batteries

In situ generated composite gel polymer electrolyte with crosslinking structure for dendrite-free and high- performance sodium metal batteries

A High Performing Conjugated Microporous Polymer Cathode for Practical Sodium Metal Batteries Using an Ammoniate as Electrolyte

A Novel Super‐Toughness and Self‐Healing Solid Polymer Electrolyte for Solid Sodium Metal Batteries

An in-situ formed stable interface layer for high-performance sodium metal anode in a non-flammable electrolyte

Dual‐Anionic Coordination Manipulation Induces Phosphorus and Boron‐Rich Gradient Interphase Towards Stable and Safe Sodium Metal Batteries

Stable Sodium Metal Batteries in Carbonate Electrolytes Achieved by Bifunctional, Sustainable Separators with Tailored Alignment

Sodium 4-styrenesulfonyl(trifluoromethanesulfonyl)imide-based Single-Ion Conducting Polymer Electrolyte Incorporating Molecular Transporters for Quasi-Solid-State Sodium Batteries

Photopolymerized Gel Electrolyte with Unprecedented Room‐Temperature Ionic Conductivity for High‐Energy‐Density Solid‐State Sodium Metal Batteries

A composite gel polymer electrolyte for sodium metal battery at a wide temperature range

A Quasi‐Solid‐State Polyether Electrolyte for Low‐Temperature Sodium Metal Batteries

Ion Conduction in Composite Polymer Electrolytes ‐ Potential Electrolytes for Sodium‐ion Batteries

Multifunctionalized Safe Separator Toward Practical Sodium‐Metal Batteries with High‐Performance under High Mass Loading

Interacted Ternary Component Ensuring High-Security Eutectic Electrolyte for High Performance Sodium-Metal Batteries.

Ultra-stable all-solid-state sodium metal batteries enabled by perfluoropolyether-based electrolytes

Electrolyte-Solvent-Modified Alternating Copolymer As a Single-Ion Solid Polymer Electrolyte for High-Performance Lithium Metal Batteries

Conformally Reactive Interphase Enables Excellent Kinetics and Cyclability in Quasi-Solid-State Sodium Metal Battery