Ultra-stable all-solid-state sodium metal batteries enabled by perfluoropolyether-based electrolytes

Xiaoen Wang,Cheng Zhang,Michal Sawczyk,Ju Sun,Qinghong Yuan,Fangfang Chen,Tiago C. Mendes,Patrick C. Howlett,Changkui Fu,Yiqing Wang,Xiao Tan,Debra J. Searles,Petr Král,Craig J. Hawker,Andrew K. Whittaker,Maria Forsyth
DOI: https://doi.org/10.1038/s41563-022-01296-0
IF: 41.2
2022-07-05
Nature Materials
Abstract:Rechargeable batteries paired with sodium metal anodes are considered to be one of the most promising high-energy and low-cost energy-storage systems. However, the use of highly reactive sodium metal and the formation of sodium dendrites during battery operation have caused safety concerns, especially when highly flammable liquid electrolytes are used. Here we design and develop solvent-free solid polymer electrolytes (SPEs) based on a perfluoropolyether-terminated polyethylene oxide (PEO)-based block copolymer for safe and stable all-solid-state sodium metal batteries. Compared with traditional PEO SPEs, our results suggest that block copolymer design allows for the formation of self-assembled nanostructures leading to high storage modulus at elevated temperatures with the PEO domains providing transport channels even at high salt concentration (ethylene oxide/sodium = 8/2). Moreover, it is demonstrated that the incorporation of perfluoropolyether segments enhances the Na + transference number of the electrolyte to 0.46 at 80 °C and enables a stable solid electrolyte interface. The new SPE exhibits highly stable symmetric cell-cycling performance at high current density (0.5 mA cm −2 and 1.0 mAh cm −2 , up to 1,000 h). Finally, the assembled all-solid-state sodium metal batteries demonstrate outstanding capacity retention, long-term charge/discharge stability (Coulombic efficiency, 99.91%; >900 cycles with Na 3 V 2 (PO 4 ) 3 cathode) and good capability with high loading NaFePO 4 cathode (>1 mAh cm −2 ).
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to improve the safety and stability of sodium - metal batteries, especially in terms of safety hazards caused by the use of highly reactive sodium - metal anodes and the formation of sodium dendrites. Specifically, the researchers designed and developed a solvent - free solid - state polymer electrolyte (SPE) based on perfluoropolyether (PFPE) - terminated polyethylene oxide (PEO) block copolymers for manufacturing safe and stable all - solid - state sodium - metal batteries. ### Main Challenges and Solutions 1. **Safety Issues**: - **Traditional Liquid Electrolytes**: Due to the widespread use of highly flammable carbonate - based liquid electrolytes, it may lead to serious safety hazards such as fire and explosion. - **Solution**: By developing all - solid - state sodium - metal batteries and eliminating any flammable liquids, the safety of the battery is significantly improved. 2. **Electrochemical Performance Issues**: - **PEO - based Solid - state Polymer Electrolytes**: Although traditional PEO - based solid - state polymer electrolytes have good sodium - salt solubility, due to the strong interaction between ether oxygen and Na⁺, the migration of Na⁺ is limited, resulting in a low Na⁺ transference number (tNa⁺). - **Solution**: The introduction of PFPE segments forms self - assembled microstructures, which enhance mechanical stability and Na⁺ transport properties and increase the Na⁺ transference number. 3. **Interface Stability Issues**: - **The Interface between Sodium Metal and Electrolyte**: The high reactivity of sodium metal and the interface instability between PEO electrolytes are the main obstacles to achieving long - life battery performance. - **Solution**: By introducing PFPE segments into the electrolyte to form stable fluorinated compounds, the solid - state electrolyte interface (SEI) on the sodium - metal surface is improved, thereby increasing the cycling stability of the battery. ### Experimental Results - **Conductivity**: The conductivity of the EO10 - PFPE electrolyte reaches 1.0 × 10⁻⁴ S cm⁻¹ at 80 °C, which is higher than that of the EO10 - CTRL electrolyte. - **Na⁺ Transference Number**: The Na⁺ transference number of the EO10 - PFPE electrolyte reaches 0.46 at 80 °C, which is higher than 0.33 of the EO10 - CTRL electrolyte. - **Symmetric Battery Performance**: The symmetric battery using the EO10 - PFPE electrolyte exhibits extremely high stability and a cycling life of up to 1000 hours at a high current density (0.5 mA cm⁻², 1.0 mAh cm⁻²). - **All - solid - state Sodium - metal Battery Performance**: The assembled all - solid - state sodium - metal battery exhibits excellent capacity retention, long - term charge - discharge stability (coulombic efficiency of 99.91%, over 900 cycles), and good performance of the high - loading NaFePO₄ cathode. ### Conclusion By introducing PFPE segments, the researchers successfully designed a new type of solid - state polymer electrolyte, which significantly improves the safety and electrochemical performance of all - solid - state sodium - metal batteries. This research result provides new ideas and methods for the design of high - performance sodium batteries in the future.