Abstract:This study utilized discarded steel slag (SS) as raw material and prepared modified steel slag materials (SS-SBC, SS-NBC, SS-BHA) through modification with biomass materials such as straw biochar (SBC), nutshell biochar (NBC), and biochemical humic acid (BHA). These materials were then applied for the removal of Pb from both solution and soil. The physical and chemical properties of the materials were analyzed using characterization techniques such as SEM, EDS, XRD, and BET. The specific surface area of the modified materials increased from the original 3.8584 m 2 /g to 34.7133 m 2 /g, 181.7329 m 2 /g, and 7.7384 m 2 /g, respectively. The study then explored the influence of different adsorption conditions on the adsorption capacity of Pb in solution, determining the optimal conditions as follows: initial concentration of 200 mg/L, adsorbent mass of 0.04 g, temperature of 15 °C, and pH = 2. To further investigate the adsorption process, kinetic and isotherm models were established. The results indicated that the adsorption process for all three materials followed a pseudo-second-order kinetic model and Freundlich isotherm model, suggesting a multi-layer chemical adsorption. Thermodynamic analysis revealed that the adsorption process was an exothermic spontaneous reaction. Soil cultivation experiments were conducted to explore the effects of different material addition amounts and cultivation times on the passivation of Pb-polluted soil. Analysis of heavy metal forms in the soil revealed that the addition of modified materials reduced the acid-extractable form of Pb in the soil and increased the residual form, which is beneficial for reducing the migration of Pb in the soil. FT-IR and XPS analyses were employed to study the functional groups, element composition, and valence states before and after adsorption passivation of Pb by the three materials. The results confirmed that the adsorption mechanisms of SS-SBC, SS-NBC, and SS-BHA mainly involved electrostatic adsorption, ion and ligand exchange, and surface precipitation. This study not only provides a new material for adsorbing and immobilizing heavy metals in soil and water but also offers a new approach for the resource utilization of steel slag waste.

Remediation of arsenic contaminated water and soil using mechanically (ball milling) activated and pyrite-amended electrolytic manganese slag

Remediation of As and Cd Contaminations by Composite Material Additives in Smelting Site Soil

Simultaneous immobilization of multiple heavy metals in polluted soils amended with mechanical activation waste slag

Deep insight on mechanism and contribution of arsenic removal and heavy metals remediation by mechanical activation phosphogypsum

Remediation performance of As-contaminated water and soil using a novel Fe–Mn bimetallic (oxyhydr)oxide coated on natural magnetite

Eco-utilization of steel slag: Preparation of Fe-based calcium silicate hydrate and its application in As(V) removal

Anionic surfactant-activated remediation of Pb, Cd, As contaminated soil by electrochemical technology

A novel method for solidification/stabilization of Cd(II), Hg(II), Cu(II), and Zn(II) by activated electrolytic manganese slag

Enhanced electrokinetic remediation by magnetic induction for the treatment of co-contaminated soil

Synchronous stabilization of Pb, Zn, Cd, and As in lead smelting slag by industrial solid waste

Stabilization of arsenic-cadmium co-contaminated soil with the iron-manganese sludge derived amendment: Effects and mechanisms

Stabilization and Remediation of Arsenic-Contaminated Soil: Fly Ash-Based Technology for Industrial Site Restoration

Remediation of Cadmium and Lead in contaminated soils by a newly modified fly ash material: The possibility and safety

Enhanced Self-Cementation of Arsenic-Contaminated Soil via Activation of Non-Thermal Plasma-Irradiated Ferromanganese: A Mechanistic Investigation

Efficient stabilization of arsenic migration and conversion in soil with surfactant-modified iron-manganese oxide: Environmental effects and mechanistic insights

Minimization and stabilization of smelting arsenic-containing hazardous wastewater and solid waste using strategy for stepwise phase-controlled and thermal-doped copper slags

Utilizing different types of biomass materials to modify steel slag for the preparation of composite materials used in the adsorption and solidification of Pb in solutions and soil

An all-in-one strategy for resource recovery and immobilization of arsenic from arsenic-bearing gypsum sludge

Disposal of iron-manganese sludge from waterworks and its potential for Arsenic removal

Pb/As simultaneous removal from soil leachate of Pb/Zn smelting sites by magnetic biochar

Preparation of environmental remediation material based on manganese-slag and sewage sludge as a strategy for remediation of cadmium pollution