Abstract:Over the past few years, there has been growing interest in using inorganic quaternary nitrate-based molten salt mixtures as a highly effective heat transfer fluid (HTF) for concentrated power plants, primarily because they can achieve low melting temperatures. However, the high viscosity of these salt mixtures is still a significant challenge that hinders their widespread adoption. The high viscosity leads to high pumping power requirements, which increases operational costs, and reduces the efficiency of the Rankine cycle. To address this challenge, this study developed and characterized a novel quaternary molten salt, focusing on the effect of LiNO3 additions on the salt's viscosity, thermal conductivity, melting point temperature, heat capacity, and thermal stability. The quaternary mixture comprised KNO3, LiNO3, Ca(NO3)2, and NaNO2, with varying percentages of each salt. The study utilized various standard techniques to examine the characteristics of the developed mixture. Results showed that increasing LiNO3 content led to a decrease in melting temperature, higher heat capacity, improved thermal stability, conductivity, and reduced viscosity at solidification temperature. The lowest endothermic peak for the new mixture emerged at 73.5 °C, which is significantly lower than that of commercial Hitec and Hitec XL, indicating better potential for use as a heat transfer fluid for concentrated solar thermal power plant applications. Furthermore, the thermal stability results showed high stability up to 590 °C for all the samples examined. Overall, the new quaternary molten salt shows promise as a potential replacement for current organic synthetic oil, offering a more efficient solution.

Heat Transfer of Ca (NO 3 ) 2 -KNO 3 Molten Salt Mixtures for Austempering and Martempering Processes of Steels

Characterization and Heat Transfer Performance of Quarternary Nitrate Based Molten Salts

Heterogeneous 3D Morphological Evolution of Ni Microparticles in Molten Salts: Visualized by Operando Synchrotron X-ray Nano-tomography

Development and characterization of a quaternary nitrate based molten salt heat transfer fluid for concentrated solar power plant

Critical Heat Transfer Coefficients for Selection of Quench Media during Heat Treatment of Steels

Investigation on thermal performance of eutectic binary nitrate-carbonate molten salt under thermal shock condition

Preparation and Thermal Properties of Quaternary Mixed Nitrate with Low Melting Point

Investigation on thermal performance of quinary nitrate/nitrite mixed molten salts with low melting point for thermal energy storage

Experiment and Analysis of Compatibility between New Phase Change Mixed Molten Salt and 316L Stainless Steel

Thermophysical Properties' Enhancement of LiNO3-NaNO3-KNO3-NaNO2-KNO2 Mixed with SiO2/MgO Nanoparticles

Experimental Test of Properties of KCl–MgCl2 Eutectic Molten Salt for Heat Transfer and Thermal Storage Fluid in Concentrated Solar Power Systems

Improving the Thermal Properties of NaNO3-KNO3 for Concentrating Solar Power by Adding Additives

High-temperature corrosion of a nickel-based alloy in a molten chloride environment – The effect of thermal and chemical purifications

Design of new molten salt thermal energy storage material for solar thermal power plant

A Novel Design of a Molten Salt Bath Structure and Its Quenching Effect on Wire Transformation from Austenite to Sorbite

Elucidating the Transition of 3D Morphological Evolution of Binary Alloys in Molten Salts with Metal Ion Additives

Experimental Study on the Thermal Stability of a New Molten Salt with Low Melting Point for Thermal Energy Storage Applications

Experimental study of the effect of the concentration of water/polyalkylene glycol solutions on heat transfer in steels subjected to quenching

Experimental Studies on Endothermic Reversible Reaction of Salts for Cooling

Experimental Study On Thermal Performance Of Mixed Nitrate And Carbonate Salts

Investigation on Static and Dynamic Corrosion Behaviors of Thermal Energy Transfer and Storage System Materials by Molten Salts in Concentrating Solar Power Plants