Abstract:Freeze-drying is an indispensible drying method for preserving original properties of the material of interest. Rigorous determination for the transitional point that distinguishes the primary drying stage from the secondary drying stage is very important for quality control of product owing to different adaptive strategies in operation imposed in the two stages Therefore, better understanding the evolution of the temperature profiles and the phase distributions during drying becomes an essential part of determining an end point of the primary drying stage. The primary objective of this work is to probe the evolution of the temperature profiles and the phase distributions during the primary drying stage in a microscopic point of view. A pore-scale network model of freeze-drying with coupled heat and mass transfer was developed, in which mass balance and energy balance equations were solved simultaneously on two sets of square lattice pore-throat network incorporated with the pore size distribution of the material of interest. Numerical simulations show that the drying curve predicted by the present model agrees well with the experimental data during the primary drying stage. The effects of network size and time step on simulations were studied in this paper. It shows that reducing the time step and enlarging the network size in the simulation leads to the improvement of the accuracy of the model at the expense of heavy computation efforts. Therefore, it is important to select the size of the network and the time step in the simulation properly. The simulation results also show that the model is capable of capturing the characteristics of the temperature profiles and the phase distributions at the pore level. The pore scale network model for freeze-drying will provide insight into the quality control of products and the risk avoidance of drying failure theoretically.

Study on the response law between cooling rate and temperature with process parameters during vacuum freezing of liquid

Experimental study on high efficiency evaporator in a large quick-freeze equipment

Experimental Study on High-efficient Evaporator in Large Quick-freeze Equipment

Thermodynamic Analysis of a Freeze-Dryer Utilizing Hygroscopic Solution

Modeling and analysis of non-isothermal of droplet flash evaporation in vacuum environment

A modeling study of sessile water droplet on the cold plate surface during freezing under natural convection with gravity effect considered

Modeling study on sessile water droplet during freezing with the consideration of gravity, supercooling, and volume expansion effects

Numerical investigation on freeze-drying of aqueous material frozen with pre-built pores

Modelling the primary drying stage of the spray freeze drying process based on the non-equilibrium formulation

Study on the freeze drying of materials in vials: process simulation and experimental verification

Simulation and Experiment on Supercooled Sessile Water Droplet Freezing with Special Attention to Supercooling and Volume Expansion Effects

Model of Mass and Heat Transfer during Vacuum Freeze-Drying for Cornea

The Influence of Air Parameters in Cold Storage on Food Freezing

The freeze-drying performance under pressures from 1.325 to 101.325 kPa

One-dimensional finite-difference modeling on temperature history and freezing time of individual food

Experimental and Numerical Investigations on Freeze-Drying of Porous Media with Prebuilt Porosity

Impact of thermal gradients on phase distributions during freeze-drying: Numerical simulations through pore-scale network modeling

Optimization of process parameters for freeze-drying of Letinus edodes

Study on the Freeze Drying of Materials in Vials: Construction and Solution of the Two-dimension Model

Theoretical Analysis of Heat Transfer of Adsorption Fluidization Freeze-Drying at Atmospheric Pressure

STUDY ON HEAT TRANSFER OF ADSORPTION FLUIDIZED BED FREEZE-DRYING OF GRANULAR MATERIAL AT ATMOSPHERIC PRESSURE