Abstract:The electrochemical behaviors of eight parent alloys and four post-solder alloys used in dental prostheses were specified in a (pH=7.4; (NaCl)=9g/L)-aqueous solution at 37°C. For each alloy, the free potential was followed during two hours, and a cyclic polarization between the cathodic domain and the solvent's oxidation was performed. The gal- vanic corrosion between each parent alloy and its usual post-solder was also studied. The free potentials stay in the immu- nity domain of the alloy's base-elements (precious metals) or in their passivation domain (nickel, chromium). A relatively strong oxidation of the alloys is possible only for high values of applied potential. Corrosion of the noblest alloys is al- most inexistent. It occurs for the nickel-base alloys but it is very slow. Most of the elements present can be oxidized, but only for high potentials which cannot be really achieved by dissolved oxygen. Galvanic corrosion can occur between the parent alloy and the post-solder alloy in some cases. The realization of frameworks for fixed partial denture (FPD) often involves the use of more or less noble metallic alloys and their assemblage by soldering. The latter is called pre-ceramic soldering or post-ceramic soldering, this de- pending on the step of the fabrication of the prostheses at which this soldering is realized. Soldering is well used to correct distortion of the framework which occurs during the casting process (1), to improve the seating accuracy (2) and to correct a possible movement of teeth before prosthesis cementation (3). The solder joint is often the weakest part of a fixed partial denture (4, 5). While some defects can be due to the process of fabrication (6), others can appear during the use of the prosthesis in the mouth, because of corrosion by saliva which can generate additional cavities on alloy sur- face. Indeed, the metallic framework may partly remain exposed to the buccal milieu, notably a part of the parent alloy and the post-ceramic solder which is not covered by ceramic. These are the reasons why the individual behaviors of main alloy of the framework and of the post-solder alloys in contact with saliva need to be better known, as well as the behavior of this parent alloy coupled with its usual post- solder. The purpose of this article is first to specify the separate behaviors of the parent alloy and of the post-ceramic solder, and second to study the possible galvanic corrosion which could be due to the association of the two materials, by using electrochemical techniques. The electrolyte used in this study, is characterized by a NaCl concentration of 9 g/L and

The effects of digoxin on resting membrane potentials of skeletal muscles in dystrophic mice.

Research progress on the diagnoses and rehabilitation for cubital tunnel syndrome: A narrative review

The Value of Ultrasonography in Diagnosis of Carpal Tunnel Syndrome

Anterior Subcutaneous Transposition of the Ulnar Nerve Improves Neurological Function in Patients with Cubital Tunnel Syndrome

Clinical Effect Observation of Vascularized Anterior Transposition of Ulnar Nerve for Treatment of Severe Cubital Tunnel Syndrome

Clinical Analysis of Subcutaneous Anterior Transposition of the Ulnar Nerve in 135 Patients of Cubital Tunnel Syndrome

The application of ultrasonography in the diagnosis and treatment of cubital tunnel syndrome

Applied anatomical study of the vascularized ulnar nerve and its blood supply for cubital tunnel syndrome at the elbow region

Relevant factors influencing the outcome of severe cubital tunnel syndrome after operation

Clinical application of endoscopic single hole minimally invasive treatment of cubital tunnel syndrome

Endoscopic ulnar nerve decompression for idiopathic cubital tunnel syndrome

A Clinical Efficacy Assessment of Simple Decompression of Cubital Tunnel Syndrome

Electrochemical Behavior of Alloys for Fixed Partial Denture

Endoscopy-assisted cubital tunnel release under carbon dioxide insufflation and anterior transposition.

The Feasibility of Using High-Resolution Ultrasonography to Assess Ulnar Nerve in Patients with Diabetes Mellitus

Preliminary study on the lesion location and prognosis of cubital tunnel syndrome by motor nerve conduction studies.

Surgical Treatment for Severe Cubital Tunnel Syndrome with Absent Sensory Nerve Conduction

Ultrasonographic Characteristics and Assessment of Quantitive Diagnosis for Carpal Tunnel Syndrome

Ulnar nerve decompression and transposition with versus without supercharged end-to-side motor nerve transfer for advanced cubital tunnel syndrome: a randomized comparison study

Aretrospective study of revision cases after ulnar nerve anterior transposition at the elbow

[Monographic study on dentinogenesis imperfecta].