[The danger of barbituries].

L. Curatolo

Abstract:

What problem does this paper attempt to address?

A Novel Electrochemical Sensor Based on Reduced Graphene Oxide–TiO2 Nanocomposites with High Selectivity for the Determination of Hydroxychloroquine

Huilan Zhang,Lu Cheng,Hongyuan Shang,Wen Zhang,Aiping Zhang

DOI: https://doi.org/10.1134/S1023193521080152

2021-09-11

Russian Journal of Electrochemistry

Abstract:A simply sensitive sensor based on a reduced graphene oxide–TiO 2 nanocomposite modified glassy carbon electrode (RGO–TiO 2 /GCE) was developed for the electrochemical determination of an antimalarial drug, hydroxychloroquine (HCQ). The modified electrode was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Electrochemical test showed that the RGO–TiO 2 electrode had stronger electrochemical activity and higher effective real surface area than that of TiO 2 electrode and bare electrode. The electrochemical response of RGO–TiO 2 nanocomposite modified electrode toward HCQ oxidation was studied by CV, chronoamperometry (CHA), chronocoulometry (CHC) and square-wave voltammetry (SWV). Interestingly, RGO–TiO 2 /GCE indicated an excellent electrocatalytic activity for HCQ. Under the optimal experimental conditions, a linear relationship between the peak current and the concentration was obtained, ranging from 0.25 to 500 μM, with the detection limit (S/N = 3) of 12.5 nM and quantification limit (S/N = 10) of 0.97 μM. Furthermore, the proposed sensor was successfully applied to the determination of HCQ in pharmaceutical (tablets) samples. In summary, the developed sensor was low cost and efficient, making it potentially attractive for practical sample analysis application of HCQ.

electrochemistry
Electrocatalytic Determination of Hydroxychloroquine Using Sodium Dodecyl Sulphate Modified Carbon Nanotube Paste Electrode

P. A. Pushpanjali,J. G. Manjunatha,N. Hareesha,T. Girish,Abdullah A. Al-Kahtani,Ammar Mohamed Tighezza,Narges Ataollahi

DOI: https://doi.org/10.1007/s11244-022-01568-8

IF: 2.781

2022-01-20

Topics in Catalysis

Abstract:Selective, sensitive, easy, and fast voltammetric techniques were developed for the analysis of Hydroxychloroquine (HCQ). These analysis were carried out at sodium dodecyl sulphate modified carbon nanotube paste electrode (SDSMCNTPE) using an aqueous 0.2 M phosphate buffer solution as supporting electrolyte. The field emission-scanning electron microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy were used for material characterization. A minute quantity of the SDS surfactant was sufficient to convey an outstanding electrocatalytic action to the electrochemical oxidation nature of HCQ. The HCQ molecule parades only electrochemical oxidation (irreversible) with the transfer of two electrons. The detection of HCQ was carried out through CV method at SDSMCNTPE and bare carbon nanotube paste electrode (BCNTPE). The corresponding analytical curve offered a decent linear nature in the considered HCQ concentration range (10–40 µM) and the detection limit was found to be 0.85 µM. The significant peak to peak split-up was observed between HCQ and interferents with a decent sensitivity and stability. The SDSMCNTPE to be an approachable electrode for the usage in the examination of HCQ independently and in the presence of paracetamol (PC) and ascorbic acid (AA). Thus, they were used to determine HCQ in pharmaceutical formulations and the results that showed good agreement with comparative methods. Furthermore, a mechanism for HCQ electro-oxidation was proposed.

chemistry, physical, applied
Quality-by-design ecofriendly potentiometric sensor for rapid monitoring of hydroxychloroquine purity in the presence of toxic impurities

Mohammed E. Draz,Fadwa H. Edrees,Heba M. Mohamed,Sherif F. Hammad,Ahmed S. Saad

DOI: https://doi.org/10.1038/s41598-024-53456-8

IF: 4.6

2024-03-24

Scientific Reports

Abstract:Hydroxychloroquine (HCQ) is prescribed to treat malaria and certain autoimmune diseases. Recent studies questioned its efficiency in relieving COVID-19 symptoms and improving clinical outcomes. This work presents a quality-by-design approach to develop, optimize, and validate a potentiometric sensor for the selective analysis of HCQ in the presence of its toxic impurities (key starting materials), namely 4,7-Dichloroquinoline (DCQ) and hydroxynovaldiamine (HND). The study employed a custom experimental design of 16 sensors with different ion exchangers, plasticizers, and ionophores. We observed the Nernstian slopes, correlation coefficients, quantification limit, response time, and selectivity coefficient for DCQ and HND. The computer software constructed a prediction model for each response. The predicted responses strongly correlate to the experimental ones, indicating model fitness. The optimized sensor achieved 93.8% desirability. It proved a slope of 30.57 mV/decade, a correlation coefficient of 0.9931, a quantification limit of 1.07 × 10 –6 M, a detection limit of 2.18 × 10 –7 M, and a fast response of 6.5 s within the pH range of 2.5–8.5. The sensor was successfully used to determine HCQ purity in its raw material. The sensor represents a potential tool for rapid, sensitive, and selective monitoring of HCQ purity during industrial production from its starting materials.

multidisciplinary sciences
Detection of Trace Microcystin-Lr on a 20mhz QCM Sensor Coated with in Situ Self-Assembled MIPs

Hao He,Lianqun Zhou,Yi Wang,Chuanyu Li,Jia Yao,Wei Zhang,Qingwen Zhang,Mingyu Li,Haiwen Li,Wen-fei Dong

DOI: https://doi.org/10.1016/j.talanta.2014.07.071

IF: 6.1

2014-01-01

Talanta

Abstract:A 20 MHz quartz crystal microbalance (QCM) sensor coated with in situ self-assembled molecularly imprinted polymers (MIPs) was presented for the detection of trace microcystin-LR (MC-LR) in drinking water. The sensor performance obtained using the in situ self-assembled MIPs was compared with traditionally synthesized MIPs on 20 MHz and normal 10 MHz QCM chip. The results show that the response increases by more than 60% when using the in situ self-assembly method compared using the traditionally method while the 20 MHz QCM chip provides four-fold higher response than the 10 MHz one. Therefore, the in situ self-assembled MIPs coated on a high frequency QCM chip was used in the sensor performance test to detect MC-LR in tap water. It showed a limit of detection (LOD) of 0.04 nM which is lower than the safety guideline level (1 nM MC-LR) of drinking water in China. The low sensor response to other analogs indicated the high specificity of the sensor to MC-LR. The sensor showed high stability and low signal variation less than 2.58% after regeneration. The lake water sample analysis shows the sensor is possible for practical use. The combination of the higher frequency QCM with the in situ self-assembled MIPs provides a good candidate for the detection of other small molecules.
Effect of flunarizine and calcium on serotonin uptake in human and rat blood platelets and rat synaptosomes

P. N. Jensen,Donald F. Smith,J. Poulsen,H. Møller,R. Rosenberg

DOI: https://doi.org/10.1016/0006-3223(94)91192-4

IF: 12.81

1994-07-15

Biological Psychiatry

Abstract:
Boosting the Electrochemical Detection Response Toward Hydroxychloroquine via Tungsten Trioxide Nanorods/Nitrogen-Doped Carbon Nanofiber Nanocomposite

Thangavelu Sakthi Priya,Megha Maria Stanley,Tse-Wei Chen,Shen-Ming Chen,Thangavelu Kokulnathan,Jeena N. Baby,Mary George

DOI: https://doi.org/10.1021/acsanm.2c04451

IF: 6.14

2022-12-15

ACS Applied Nano Materials

Abstract:The overusage of hydroxychloroquine (HQ) amidst the outbreak of coronavirus disease has contributed to increased fatalities concerning HQ poisoning. Hence, there is an utmost requirement to develop accurate and onsite methodologies for monitoring HQ in biological samples and water bodies. Metal-oxide-decorated carbon nanomaterials present excellent electrocatalytic properties, contributing to improved sensor responses. This study introduces tungsten trioxide nanorods/nitrogen-doped carbon nanofiber (WO3/N-CNF) nanocomposite, capable of detecting HQ electrochemically. The conjunction of WO3 with N-CNF offers accelerated charge transfer kinetics with an abundance of surface-active sites that benefit the sensing mechanism. Furthermore, synergistic effects arising from the nanocomposite augment the conductivity and promote faster ion diffusion. The WO3/N-CNF-based electrochemical sensor deliver high performance in the working concentration range of 0.007–480 μM and provides a detection limit of 2.0 nM for HQ. The fabricated sensor has excellent operational stability and reproducibility and is also able to show a superb selectivity toward HQ in comparison to various interfering compounds. This indicates that the designed WO3/N-CNF nanocomposite can be used as a potential electrocatalyst for the real-time monitoring of HQ.

materials science, multidisciplinary,nanoscience & nanotechnology
Simultaneous Electrochemical Detection of Catechol and Hydroquinone Based on a Carbon Nanotube Paste Electrode Modified with Electro-Reduced Graphene Oxide

Tingfei Chen,Chao Liu,Xiaojun Liu,Chunnan Zhu,Dongyun Zheng

DOI: https://doi.org/10.3390/ijms25189829

2024-09-11

Abstract:Effectively detecting catechol (CC) and hydroquinone (HQ) simultaneously is crucial for environmental protection and human health monitoring. In the study presented herein, a novel electrochemical sensor for the sensitive simultaneous detection of CC and HQ was constructed based on an electrochemically reduced graphene oxide (ERGO)-modified multi-walled carbon nanotube paste electrode (MWCNTPE). Scanning electron microscopy, X-ray photoelectron spectroscopy, Raman spectroscopy and electrochemical techniques were utilized to characterize the sensing interface and investigate the sensing mechanism. Under the optimal detection conditions, the oxidation peak currents of CC and HQ show a good linear relationship with their concentrations in the range of 0.4-400 μM with a detection limit of 0.083 μM for CC and 0.028 μM for HQ (S/N = 3). Moreover, the sensor exhibits good performance and can be applied successfully in the simultaneous detection of CC and HQ in tap water samples and urine samples with satisfactory results, indicating its promising application prospects.
Electrochemical sensor based on PEDOT/CNTs-graphene oxide for simultaneous determination of hazardous hydroquinone, catechol, and nitrite in real water samples

Yousef M. Ahmed,Mahmoud A. Eldin,Ahmed Galal,Nada F. Atta

DOI: https://doi.org/10.1038/s41598-024-54683-9

IF: 4.6

2024-03-09

Scientific Reports

Abstract:Hydroquinone (HQ), catechol (CC) and nitrite (NT) are considered aquatic environmental pollutants. They are highly toxic, harm humans' health, and damage the environment. Thus, in the present work we introduce a simple and efficient electrochemical sensor for determination of HQ, CC, and NT simultaneously in wastewater sample. The sensor is fabricated by modifying the surface of a glassy carbon electrode (GCE) by two successive thin films from poly(3,4-ethylenedioxythiophene) (PEDOT) and a mixture of carbon nanotubes-graphene oxide (CNT-GRO). Under optimized conditions the HQ, CC, and NT are successfully detected simultaneously in wastewater sample with changing their concentrations in the ranges (0.04 → 100 μM), (0.01 → 100 μM) and (0.05 → 120 μM), the detection limits are 8.5 nM, 3.8 nM and 6.1 nM, respectively. Good potential peak separations: 117 mV and 585 mV are obtained between the HQ-CC, and CC-NT. The sensor has an excellent catalytic capability toward the oxidation of HQ, CC, and NT due to good synergism between its composite components: PEDOT, GRO and CNTs. The features of the sensor are large active surface area, good electrical conductivity, perfect storage stability, good reproducibility, anti-interference capability and accepted recovery rate for HQ, CC, and NT determination in wastewater sample.

multidisciplinary sciences
Sequential cyclic-square-wave voltammetric determination of sulfanilamide and ciprofloxacin in environment water samples using a 3D-printed electrochemical device

Marina Di-Oliveira,Diele A. G Araújo,David L.O. Ramos,Lucas V.de Faria,Raquel G. Rocha,Raquel M.F. Sousa,Eduardo M. Richter,Thiago R.L.C. Paixão,Rodrigo A.A. Munoz

DOI: https://doi.org/10.1016/j.electacta.2024.143945

IF: 6.6

2024-02-13

Electrochimica Acta

Abstract:Sulfanilamide (SAD) and ciprofloxacin (CIP) are widely used antibiotics, and their indiscriminate use and disposal contribute to the increase in the contamination levels of aquatic environments. Herein, we propose a 3D-printed carbon black/polylactic acid (CB/PLA) electrochemically activated electrode to determine CIP and SAD concurrently by cyclic square-wave voltammetry (C-SWV) technique. Firstly, square wave voltammetry measurements were performed exploiting the oxidation processes of CIP and SAD (Ox1 CIP and Ox1 SAD at around +1.3 V and +1.1 V vs. Ag|AgCl|KCl (sat.) ). However, the lack of selectivity was verified in the analysis of water samples. Then, the C-SWV strategy was employed and enabled the selective determination of CIP (Ox1 CIP ) in the forward scan and SAD (Red1 SAD ) at around +0.5 V vs. Ag|AgCl|KCl (sat.) ) in the reverse scan. Under selected C-SWV conditions, linear ranges from 4.96 to 40.61 μmol L −1 (r = 0.9977) for CIP (Ox1 CIP ) and 1.99 to 10.78 μmol L −1 (r = 0.9989) for SAD (Red1 SAD ) were obtained. The limits of detection for SAD and CIP were 0.2 and 0.6 μmol L −1 , respectively, and sensitivity was enhanced by 25 % for CIP and 60 % for SAD, employing the C-SWV protocol. In addition, this technique improves the selectivity once the analytes can be determined in distinct potential scans. Satisfactory recovery values ranging from 85 to 112 % were obtained in the analysis of spiked water samples (no dilution step), suggesting no pronounced matrix interference effect, and indicating that the C-SWV methodology ensures good accuracy. This work demonstrates that the union of 3D-printed CB/PLA electrodes and the C-SWV technique can enhance selectivity and sensitivity in the sequential analysis of CIP and SAD, and it is a promising strategy to monitor other pharmacological species in water samples.

electrochemistry
3D Prussian blue/Pt decorated carbon nanofibers based screen-printed microchips for the ultrasensitive hydroquinone biosensing

Tao Liu,Ying Xie,Lei Shi,Yu Liu,Zhenyu Chu,Wanqin Jin

DOI: https://doi.org/10.1016/j.cjche.2021.02.017

IF: 3.8

2021-09-01

Chinese Journal of Chemical Engineering

Abstract:Nowadays, water pollution has become more serious, greatly affecting human life and healthy. Electrochemical biosensor, a novel and rapid detection technique, plays an important role in the real-time and trace detection of water pollutants. However, the stability and sensitivity of electrochemical biosensors remain a great challenge for practical detections in real samples to the strong interferences derived from complex components and coagulation effects. In this work, we reported a novel three-dimensional architecture of Prussian blue nanoparticles (PBNPs)/ Pt nanoparticles (PtNPs) composite film, using 3D interweaved carbon nanofibers as a supporting matrix, for the construction of screen-printed microchips-based biosensor. PtNPs with diameters of ∼2.5 nm was highly dispersed on the carbon nanofibers (CNFs) to build a 3D skeleton nanostructure through a solvothermal reduction. Subsequently, uniform PBNPs were in-situ self-assembled on this skeleton to construct a 3D architecture of PB/Pt-CNF composite film. Due to the synergistic effects derived from this special feature, the as-prepared hydroquinone (HQ) biosensor chips can synchronously promote both surface area and conductivity to greatly enhance the electrocatalysis from enzymatic reaction. This biosensor has exhibited a high sensitivity of 220.28 μA·L·mmol -1·cm-2 with an ultrawide linear range from 2.5 μmol·L-1 to 1.45 mmol·L-1 at a low potential of 0.15 V, as well as the satisfactory reproducibility and usage stability. Besides, its accuracy was also verified in the assays of real water samples. It is highly expected that the 3D PB/Pt-CNF based screen-printed microchips will have wide applications in dynamic monitoring and early warning of analytes in the various practical fields.

engineering, chemical
Gold Nanoparticle-Embedded Thiol-Functionalized Ti3C2Tx MXene for Sensitive Electrochemical Sensing of Ciprofloxacin

Mari Elancheziyan,Manisha Singh,Keehoon Won

DOI: https://doi.org/10.3390/nano14201655

2024-10-15

Abstract:The unregulated use of ciprofloxacin (CIPF) has led to increased resistance in patients and has threatened human health with issues such as digestive disorders, kidney disorders, and liver complications. In order to overcome these concerns, this work introduces a portable electrochemical sensor based on a disposable integrated screen-printed carbon electrode (SPCE) coated with gold nanoparticle-embedded thiol-functionalized Ti3C2Tx MXene (AuNPs-S-Ti3C2Tx MXene) for simple, rapid, precise, and sensitive quantification of CIPF in milk and water samples. The high surface area and electrical conductivity of AuNPs are maximized thanks to the strong interaction between AuNPs and SH-Ti3C2Tx MXene, which can prevent the aggregation of AuNPs and endow larger electroactive areas. Ti3C2Tx MXene was synthesized from Ti3AlC2 MAX phases, and its thiol functionalization was achieved using 3-mercaptopropyl trimethoxysilane. The prepared AuNPs-S-Ti3C2Tx MXene nanocomposite was characterized using FESEM, EDS, XRD, XPS, FTIR, and UV-visible spectroscopy. The electrochemical behavior of the nanocomposite was examined using CV, EIS, DPV, and LSV. The AuNPs-S-Ti3C2Tx MXene/SPCE showed higher electrochemical performances towards CIPF oxidation than a conventional AuNPs-Ti3C2Tx MXene/SPCE. Under the optimized DPV and LSV conditions, the developed nonenzymatic CIPF sensor displayed a wide range of detection concentrations from 0.50 to 143 μM (DPV) and from 0.99 to 206 μM (LSV) with low detection limits of 0.124 μM (DPV) and 0.171 μM (LSV), and high sensitivities of 0.0863 μA/μM (DPV) and 0.2182 μA/μM (LSV).
Enhanced in situ electrochemical sensing of trace chloroquine in human urine and serum samples using highly charged TiO2-NPs decorated with reduced graphene oxide

Jallal Zoubir,Walid Daoudi,Ali Assabbane,Abdessamad Tounsi,Idriss Bakas

DOI: https://doi.org/10.1007/s10008-024-05817-6

IF: 2.747

2024-02-01

Journal of Solid State Electrochemistry

Abstract:This research introduces a novel electrochemical sensor designed for the detection of chloroquine. The sensor was developed via a simple method to synthesize TiO 2 nanoparticles on reduced graphene oxide. The modified electrodes created in this manner exhibited high electrocatalytic activity and distinct chemical reactivity. Various techniques were utilized to perform morphological characterization of the nanocomposites. These techniques revealed alterations revealed changes in functional groups and the attachment of titanium to the reduced graphene oxide present on the electrode surface, thereby elucidating the reasons for the enhanced electrochemical performance. The sensor had a broad measurement range for chloroquine, capable of detecting concentrations as low as 10 −8 M. It is applicable for diverse sample analyses, including water, pharmaceuticals, human urine, and serum, with satisfaction ranging between 97 and 99%.

electrochemistry
A sustainable redox-active electrocatalyst utilizing natural quercetin-infused MWCNT for ultra-sensitive detection of environmental Cr(VI) contaminants

Sugumar Monisha,Annamalai Senthil Kumar

DOI: https://doi.org/10.1016/j.cej.2024.150381

IF: 15.1

2024-03-22

Chemical Engineering Journal

Abstract:Hexavalent chromium (Cr(VI)), classified as a Group 1 carcinogen, is a widely acknowledged water pollutant, posing significant public health risks. The persisting challenge involves the development of sensitive and cost-effective methods for the detection and monitoring of Cr(VI) species at the concentration level recommended by the World Health Organization (WHO), which is 50 ppb (960 nM), in water sources. In the electrochemical detection of Cr(VI), modified electrodes utilizing precious metals (Au and Ag) and toxic organic redox mediators (Thionine, methylene blue, quionone, bisphenol and phenosafranine) have been employed. In this work, as an new platform, green electrochemical approach based on parsley-plant based natural quercetin (Qn-Redox) infused MWCNT modified glassy carbon electrode, designated as GCE/MWCNT@Qn-Redox, has been introduced for highly-effective electrocatalytic reduction and sensing of Cr(VI) species in pH 2 KCl-HCl solution. The as prepared GCE/MWCNT@Qn-Redox showed highly redox active surface confined peak at E o = 0.550 V vs Ag/AgCl with surface excess value, 10.31 × 10 −9 mol cm −2 . Extensive physicochemical, spectroscopic, molecular characterization, and electrochemical control experiments confirm the identity of the entrapped molecular species in the green electrode as quercetin. By using scanning-electrochemical technique, the electroactive site of the green-electrode was imaged using Fe(CN) 6 3− /Fe(CN) 6 4− redox couple. The green-electrode showed excellent electrocatalytic Cr(VI) reduction signal where the Qn-Redox peak appears without any fouling problem. As a practical application, a portable batch-injection analysis coupled with three-in-one screen-printed electrode modified with MWCNT@Qn-Redox, which exhibitted a detection limit of 203 nM (S/N = 3), has been demonstrated for real time monitoring of toxic Cr(VI) species in tannery industries contaminated water samples. Given the electrochemical foundation of this approach, it holds promise for various sustainable electroanalytical assays in the future.

engineering, chemical, environmental
Silver Nanoparticle-Embedded Conductive Hydrogels for Electrochemical Sensing of Hydroquinone

Tingting Xu,Huanli Gao,Orlando J Rojas,Hongqi Dai

DOI: https://doi.org/10.3390/polym15112424

2023-05-23

Abstract:In this work, a conductive hydrogel was successfully synthesized, taking advantage of the high number density of active amino and hydroxyl groups in carboxymethyl chitosan and sodium carboxymethyl cellulose. These biopolymers were effectively coupled via hydrogen bonding with the nitrogen atoms of the heterocyclic rings of conductive polypyrrole. The inclusion of another biobased polymer, sodium lignosulfonate (LS), was effective to achieve highly efficient adsorption and in-situ reduction of silver ions, leading to silver nanoparticles that were embedded in the hydrogel network and used to further improve the electro-catalytic efficiency of the system. Doping of the system in the pre-gelled state led to hydrogels that could be easily attached to the electrodes. The as-prepared silver nanoparticle-embedded conductive hydrogel electrode exhibited excellent electro-catalytic activity towards hydroquinone (HQ) present in a buffer solution. At the optimum conditions, the oxidation current density peak of HQ was linear over the 0.1-100 μM concentration range, with a detection limit as low as 0.12 μM (signal-to-noise of 3). The relative standard deviation of the anodic peak current intensity was 1.37% for eight different electrodes. After one week of storage in a 0.1 M Tris-HCl buffer solution at 4 °C, the anodic peak current intensity was 93.4% of the initial current intensity. In addition, this sensor showed no interference activity, while the addition of 30 μM CC, RS, or 1 mM of different inorganic ions does not have a significant impact on the test results, enabling HQ quantification in actual water samples.
Electrochemical sensors based on the composite of reduced graphene oxide and a multiwalled carbon nanotube-modified glassy carbon electrode for simultaneous detection of hydroquinone, dopamine, and uric acid

Wulan Tri Wahyuni,Shafa Aini Hasnawati Ta'alia,Ari Yustisia Akbar,Bunga Rani Elvira,Irkham,Isnaini Rahmawati,Ruri Agung Wahyuono,Budi Riza Putra

DOI: https://doi.org/10.1039/d4ra05537c

2024-09-03

Abstract:Using a simple drop-casting technique, we successfully fabricated a sensitive electrochemical sensor based on the composite of reduced graphene oxide (RGO) and multiwalled carbon nanotubes (MWCNT) deposited on the surface of a glassy carbon electrode (GCE) for individual and simultaneous measurements of hydroquinone (HQ), dopamine (DA), and uric acid (UA). The nanocomposite of RGO/MWCNT was further characterized in terms of its structural properties, surface morphology, and topography using Raman, FT-IR spectroscopy, SEM, HRTEM, and AFM. Then, the proposed sensor for simultaneous measurement of HQ, DA, and UA based on RGO/MWCNT-modified GCE was investigated for its electrochemical behavior and electroanalytical performances using cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). In addition, the composition ratio between RGO and MWCT was 1 : 1 showing the highest electrochemical response for simultaneous detection of HQ, DA, and UA. Owing to the synergistic effect between RGO and MWCNT leading to excellent conductivity properties, the proposed sensor exhibited improved electrochemical response at pH 7 toward the oxidation processes of HQ, DA, and UA on the surface of modified electrode. The proposed sensor demonstrated three well-defined anodic peaks of these analytes with their linear concentrations ranges of 3.0-150.0 μM for HQ, 4.0-100.0 μM for DA, and 2.0-70.0 μM for UA. The limit of detection values for the simultaneous detection of HQ, DA, and UA were found as follows 0.400 ± 0.014, 0.500 ± 0.006, and 0.300 ± 0.016 μM, respectively. The additional features of this proposed sensor are high reproducibility and stability for the simultaneous detection of HQ, DA, and UA with negligible interference effect from interferents such as Mg2+, K+, Cl-, ascorbic acid, and glucose. An acceptable percentage of recovery was also shown by this sensor for simultaneous measurements of HQ, DA, and UA using 6 samples of human urine. In summary, the RGO/MWCNT nanocomposite has been shown to be a promising platform for rapid, simple, and reliable determination of simultaneous measurements of HQ, DA, and UA in practical applications.
A Stable and Efficient Electrochemical Sensor for Hydroquinone and Catechol Detection in Real-world Water Samples using Mesoporous CaM@rGO Nanocomposite

Naresh A. Rajpurohit,Hardik Agrawal,Kaushalya Bhakar,Kajal Panchal,Dinesh Kumar

DOI: https://doi.org/10.1016/j.snb.2024.136481

IF: 9.221

2024-08-19

Sensors and Actuators B Chemical

Abstract:Hydroquinone (HQ) and catechol (CC) are widespread environmental pollutants known for their high toxicity and poor biodegradability. Herein, we devised an electrochemical sensor for sensitive and selective detection of HQ and CC. The glassy carbon electrode (GCE) was meticulously modified by using the Ca-perovskite (CaTiO 3 /GCE), zinc-based metal-organic frameworks (Zn-MOF/GCE), and their nanocomposite with reduced graphene oxide (rGO), i.e., CaTiO 3 -Zn-MoF@rGO/GCE (CaM@rGO/GCE). The CaM@rGO/GCE sensor showed stupendous electrochemical performance due to the synergistic effects of rGO's high conductivity and Ca-perovskite's electrocatalytic activity. Furthermore, the Zn-MOF component ensures the sensor's remarkable stability. The developed sensor boasts impressive selectivity towards HQ and CC, achieving exceptionally low detection limits (0.0086 μM (S/N=3) for HQ, 0.0115 μM (S/N=3) for CC), and broad linear ranges (0.05–105 μM for HQ, 0.05–120 μM for CC). The sensors show better sensitivity to hydroquinone (HQ) than catechol (CC) due to the absence of intramolecular hydrogen bonding in HQ. The sensor's real-world applicability was validated by analyzing environmental water samples, demonstrating its immense potential for practical environmental monitoring.

chemistry, analytical,electrochemistry,instruments & instrumentation
Bimetallic PtAu-Modified Carbon Fiber Electrochemical Sensor for Simultaneous and Highly Sensitive Detection of Catechol and Hydroquinone in Environmental Waters

Qi Xiao,Jiawen Li,Mingli Yang,Huihao Li,Yi Fang,Shan Huang

DOI: https://doi.org/10.1039/d4ay01296h

IF: 3.1

2024-10-11

Analytical Methods

Abstract:In this study, we report the development of a novel electrochemical sensor capable of the simultaneous detection of catechol (CC) and hydroquinone (HQ) through differential pulse voltammetry. The sensor is constructed using carbon fiber (CF) that has been intricately modified with bimetallic PtAu nanoparticles. The fabrication process involves subjecting CF to ultrasound treatment in an acidic mixture, resulting in the formation of activated carbon fiber (ACF). This activation step not only enhances surface roughness but also facilitates subsequent modification, ensuring the stability of the material. Bimetallic PtAu nanoparticles are then uniformly deposited onto the ACF surface through co-deposition from a metal precursor solution. The modified ACF, adorned with bimetallic PtAu nanoparticles, exhibits excellent conductivity and efficiently catalyzes both CC and HQ in a 10 mM phosphate-buffered saline solution at pH 7.0, thereby enabling their simultaneous detection. Under optimized experimental conditions, this electrochemical sensor achieves impressive detection limits of 0.019 μM for CC and 0.28 μM for HQ within same concentration range of 0.5 − 50 μM, respectively. The practicality of the sensor is further demonstrated through recovery experiments using real water samples. This electrochemical sensor, with its superior performance and versatility, shows great potential for applications in analytical chemistry and environmental monitoring.

spectroscopy,chemistry, analytical,food science & technology
2D-Graphitic Carbon Nitride Nanosheet/Metal Nanocomposites for Electrochemical Sensors of Hydroquinone in Real Sample Analysis

Ravikumar Murugan,Kuo Yuan Hwa,Aravindan Santhan

DOI: https://doi.org/10.1021/acsanm.3c00877

IF: 6.14

2023-05-11

ACS Applied Nano Materials

Abstract:In the present work, we have investigated a low-cost fabrication method in preparing two-dimensional (2D) graphitic carbon nitride (g-C3N4) with nanosheet/metal nanocomposites by a rapid calcination process. The synthesized metal/g-C3N4 nanosheet was analyzed further by using UV–visible, Fourier transform-infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDAX) with elemental analysis mapping. Through field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM), the metal/g-C3N4 nanosheet was observed to have a porous nanostructure. X-ray diffraction patterns of the 2D-GCN nanostructure were confirmed to be of fine crystalline size. X-ray photoelectron spectroscopy provided qualitative and quantitative data about the structure of C3N4. An electrochemical performance was carried out by using cyclic and differential pulsed voltammetry techniques. The metal/g-C3N4 nanosheet/nanocomposite was fabricated on the glassy carbon electrode (GCE) for electrochemical determination of hydroquinone (HQ). The electrocatalytic mechanism of HQ was scrutinized, which proved fast electron and ion transfer phenomena. The as-prepared Ag/g-C3N4/GCE exposed greater performance with a low limit of detection (LOD) of 5.8 μM in a wide linear range from 0.99 to 999.96 μM, which shows better repeatability, reproducibility, stability and an outstanding selectivity. The Ag/g-C3N4/GCE-fabricated electrode exhibited good sensitivity at 0.067 μA Mm–1 cm–2. The proposed sensor additionally verified its practical feasibility in real-time monitoring on river and tap water samples with a satisfactory recovery.

materials science, multidisciplinary,nanoscience & nanotechnology
Molecularly imprinted photoelectrochemical sensor for ultrasensitive and selective detection of hydroquinone using 0D CdS nanoparticle/3D flower-like ZnIn2S4 microsphere nanocomposite

Lan Wang,Feng Yue,Shuo Zhang,Cong Li,Bang Tan,Jingjing Du,Baodan Jin,Xiaojing Zhang,Yongpeng Ma,Hongzhong Zhang

DOI: https://doi.org/10.1016/j.jcis.2024.07.119

2024-12-15

Abstract:A novel photoelectrochemical (PEC) sensor was developed for the ultra-sensitive and highly selective detection of hydroquinone (HQ), featuring a composite structure that combines 0D CdS nanoparticles with a 3D flower-like ZnIn2S4 microsphere. The sensor, termed rMIP/CdS/ZnIn2S4, employed molecularly imprinted polymers (MIPs) to achieve specific recognition of HQ. An p-phenylenediamine (pPD) polymer film was electrochemically polymerized onto the surface of the CdS/ZnIn2S4 composite-coated glassy carbon electrode (GCE). Through hydrogen bonding, HQ molecules were imprinted onto the polymer film. Subsequent elution removed these molecules, leaving behind specific recognition sites, enabling selective detection of HQ. The unique spatial structure and heterojunction properties of the 0D CdS nanoparticle/3D flower-like ZnIn2S4 composite, combined with molecular imprinting, significantly enhanced the photocurrent response and increased the selectivity and sensitivity for HQ detection. Under optimal conditions, the rMIP/CdS/ZnIn2S4 sensor demonstrated a low detection limit (0.7 nmol·L-1, S/N=3) over a wide linear range of 1-1200 nmol·L-1. The sensor was successfully applied to detect HQ in real water samples, showing promise for environmental pollution control applications.
Effect of Modification of a Laccase-Based Electrochemical Biosensor with Carbon Nanotubes on Signal Separation of Dihydroxybenzene Isomers

Szymon Malinowski,Magdalena Wardak,Cecylia Wardak

DOI: https://doi.org/10.1021/acs.langmuir.3c02942

IF: 3.9

2024-02-08

Langmuir

Abstract:This work describes a new electrochemical biosensor for the simultaneous determination of catechol and hydroquinone. A laccase biorecognition layer was deposited using an innovative soft plasma polymerization technique onto a multiwalled carbon nanotube (MWCNT)-modified glassy carbon electrode (GCE) to sufficiently separate catechol (CT) and hydroquinone (HQ) oxidation peaks. The electrochemical analysis carried out for MWCNTs with various morphologies was supported by density functional theory (DFT) calculations showing differences in the electronic structures of both dihydroxybenzene isomers and the MWCNTs forming the biosensor interlayer. The best biosensor peak separation and biosensor analytical parameters were observed for the device containing 75 μg of MWCNTs with a higher internal diameter. For this laccase-based biosensor, a linearity range from 0.1 to 57 μM for catechol and 0.5 to 57 μM for hydroquinone as well as a sensitivity of 0.56 and 0.54 μA/μM for catechol and hydroquinone was observed, respectively. The limit of detection (LOD) values were 0.028 and 0.15 μM for CT and HQ, respectively. This biosensor was also characterized by good selectivity, stability, and reproducibility. It was successfully applied for the quantification of contaminants in the analysis of natural water samples.

chemistry, multidisciplinary, physical,materials science

[The danger of barbituries].

A Novel Electrochemical Sensor Based on Reduced Graphene Oxide–TiO2 Nanocomposites with High Selectivity for the Determination of Hydroxychloroquine

Electrocatalytic Determination of Hydroxychloroquine Using Sodium Dodecyl Sulphate Modified Carbon Nanotube Paste Electrode

Quality-by-design ecofriendly potentiometric sensor for rapid monitoring of hydroxychloroquine purity in the presence of toxic impurities

Detection of Trace Microcystin-Lr on a 20mhz QCM Sensor Coated with in Situ Self-Assembled MIPs

Effect of flunarizine and calcium on serotonin uptake in human and rat blood platelets and rat synaptosomes

Boosting the Electrochemical Detection Response Toward Hydroxychloroquine via Tungsten Trioxide Nanorods/Nitrogen-Doped Carbon Nanofiber Nanocomposite

Simultaneous Electrochemical Detection of Catechol and Hydroquinone Based on a Carbon Nanotube Paste Electrode Modified with Electro-Reduced Graphene Oxide

Electrochemical sensor based on PEDOT/CNTs-graphene oxide for simultaneous determination of hazardous hydroquinone, catechol, and nitrite in real water samples

Sequential cyclic-square-wave voltammetric determination of sulfanilamide and ciprofloxacin in environment water samples using a 3D-printed electrochemical device

3D Prussian blue/Pt decorated carbon nanofibers based screen-printed microchips for the ultrasensitive hydroquinone biosensing

Gold Nanoparticle-Embedded Thiol-Functionalized Ti3C2Tx MXene for Sensitive Electrochemical Sensing of Ciprofloxacin

Enhanced in situ electrochemical sensing of trace chloroquine in human urine and serum samples using highly charged TiO2-NPs decorated with reduced graphene oxide

A sustainable redox-active electrocatalyst utilizing natural quercetin-infused MWCNT for ultra-sensitive detection of environmental Cr(VI) contaminants

Silver Nanoparticle-Embedded Conductive Hydrogels for Electrochemical Sensing of Hydroquinone

Electrochemical sensors based on the composite of reduced graphene oxide and a multiwalled carbon nanotube-modified glassy carbon electrode for simultaneous detection of hydroquinone, dopamine, and uric acid

A Stable and Efficient Electrochemical Sensor for Hydroquinone and Catechol Detection in Real-world Water Samples using Mesoporous CaM@rGO Nanocomposite

Bimetallic PtAu-Modified Carbon Fiber Electrochemical Sensor for Simultaneous and Highly Sensitive Detection of Catechol and Hydroquinone in Environmental Waters

2D-Graphitic Carbon Nitride Nanosheet/Metal Nanocomposites for Electrochemical Sensors of Hydroquinone in Real Sample Analysis

Molecularly imprinted photoelectrochemical sensor for ultrasensitive and selective detection of hydroquinone using 0D CdS nanoparticle/3D flower-like ZnIn2S4 microsphere nanocomposite

Effect of Modification of a Laccase-Based Electrochemical Biosensor with Carbon Nanotubes on Signal Separation of Dihydroxybenzene Isomers