NEUTROPENIA AND THROMBOCYTOPENIA AFTER REPEATED COURSES OF LEUCOCYTE INTERFERON

S. Urbaniak,I. Halliday,G. W. Beveridge,A. Kay

DOI: https://doi.org/10.1016/S0140-6736(78)90574-3

IF: 202.731

1978-03-11

The Lancet

Abstract:

What problem does this paper attempt to address?

Visual Detection of Surface Defects Based on Self-Feature Comparison in Robot 3-D Printing

Hongyao Shen,Wangzhe Du,Weijun Sun,Yuetong Xu,Jianzhong Fu

DOI: https://doi.org/10.3390/app10010235

2019-01-01

Applied Sciences

Abstract:Fused Deposition Modeling (FDM) additive manufacturing technology is widely applied in recent years. However, there are many defects that may affect the surface quality, accuracy, or even cause the collapse of the parts in the printing process. In the existing defect detection technology, the characteristics of parts themselves may be misjudged as defects. This paper presents a solution to the problem of distinguishing the defects and their own characteristics in robot 3-D printing. A self-feature extraction method of shape defect detection of 3D printing products is introduced. Discrete point cloud after model slicing is used both for path planning in 3D printing and self-feature extraction at the same time. In 3-D printing, it can generate G-code and control the shooting direction of the camera. Once the current coordinates have been received, the self-feature extraction begins, whose key steps are keeping a visual point cloud of the printed part and projecting the feature points to the picture under the equal mapping condition. After image processing technology, the contours of pictured projected and picture captured will be detected. At last, the final defects can be identified after evaluation of contour similarity based on empirical formula. This work will help to detect the defects online, improve the detection accuracy, and reduce the false detection rate without being affected by its own characteristics.
Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Weiyi Lin,Hongyao Shen,Jianzhong Fu,Senyang Wu

DOI: https://doi.org/10.1016/j.precisioneng.2019.06.004

IF: 3.315

2019-01-01

Precision Engineering

Abstract:This paper proposes an online quality monitoring system based on laser scanning technology for defect detection in material extrusion additive manufacturing processes. The proposed method, which is based on a combination of existing efficient algorithms, can detect and identify defects by comparing the surface point cloud obtained by laser scanning with the ideal surface extracted from the CAD model. In addition, a three-dimensional model of the identified defect can be reconstructed by the monitoring system for feedback control of the system. Experimental studies show that the proposed method not only effectively identifies overfill and underfill defects but also accurately reconstructs the three-dimensional model of both types of defects. These data are used for feedback control of 3D printers to determine whether the 3D printer should be eventually shut down to reduce material and time waste.
Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Yafei Dong,Chenjie Xia,Jiangxin Yang,Yanlong Cao,Yanpeng Cao,Xin Li

DOI: https://doi.org/10.1109/tii.2021.3103019

IF: 12.3

2021-01-01

IEEE Transactions on Industrial Informatics

Abstract:Nondestructive thermography is a high-speed, low-cost, and safe solution for subsurface defects detection of carbon fiber reinforced polymer (CFRP) materials, providing essential quality control in aerospace, automobile, and sports industries. In this article, we build a reflective lock-in thermography system and construct a dataset that contains real-captured thermal image sequences of CFRP samples with various simulated internal defects under different excitation frequencies. Then, we present a novel 3-D convolutional neural network (CNN) model incorporating a combination of spatial and temporal convolutional filters and batch-size independent group normalization (GN) as a unified framework to process thermal image sequences captured by lock-in thermography for simultaneous subsurface defect detection and depth estimation. Finally, we define a multitask loss function to perform end-to-end training of both defect detection and depth estimation tasks based on the real-captured infrared sequences. Comparative experiments are carried out on CFRP specimens with artificial defects of various sizes/shapes and at different depths. Qualitative and quantitative results illustrate that our 3-D CNN model is capable of predicting accurate locations and depths of subsurface defects and performs favorably against the hand-crafted and CNN-based methods in lock-in thermography for individual defect detection and depth estimation tasks. The captured dataset and the source codes will be made publicly available.
Automated Defect Recognition for Additive Manufactured Parts Using Machine Perception and Visual Saliency

Jan Petrich,Edward W Reutzel

DOI: https://doi.org/10.1089/3dp.2021.0224

2023-06-01

Abstract:Metal additive manufacturing (AM) is known to produce internal defects that can impact performance. As the technology becomes more mainstream, there is a growing need to establish nondestructive inspection technologies that can assess and quantify build quality with high confidence. This article presents a complete, three-dimensional (3D) solution for automated defect recognition in AM parts using X-ray computed tomography (CT) scans. The algorithm uses a machine perception framework to automatically separate visually salient regions, that is, anomalous voxels, from the CT background. Compared with supervised approaches, the proposed concept relies solely on visual cues in 3D similar to those used by human operators in two-dimensional (2D) assuming no a priori information about defect appearance, size, and/or shape. To ingest any arbitrary part geometry, a binary mask is generated using statistical measures that separate lighter, material voxels from darker, background voxels. Therefore, no additional part or scan information, such as CAD files, STL models, or laser scan vector data, is needed. Visual saliency is established using multiscale, symmetric, and separable 3D convolution kernels. Separability of the convolution kernels is paramount when processing CT scans with potentially billions of voxels because it allows for parallel processing and thus faster execution of the convolution operation in single dimensions. Based on the CT scan resolution, kernel sizes may be adjusted to identify defects of different sizes. All adjacent anomalous voxels are subsequently merged to form defect clusters, which in turn reveals additional information regarding defect size, morphology, and orientation to the user, information that may be linked to mechanical properties, such as fatigue response. The algorithm was implemented in MATLAB™ using hardware acceleration, that is, graphics processing unit support, and tested on CT scans of AM components available at the Center for Innovative Materials Processing through Direct Digital Deposition (CIMP-3D) at Penn State's Applied Research Laboratory. Initial results show adequate processing times of just a few minutes and very low false-positive rates, especially when addressing highly salient and larger defects. All developed analytic tools can be simplified to accommodate 2D images.
Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods

Manuel Rodríguez-Martín,José G. Fueyo,Diego Gonzalez-Aguilera,Francisco J. Madruga,Roberto García-Martín,Ángel Luis Muñóz,Javier Pisonero

DOI: https://doi.org/10.3390/s20143982

IF: 3.9

2020-07-17

Sensors

Abstract:The present article addresses a generation of predictive models that assesses the thickness and length of internal defects in additive manufacturing materials. These modes use data from the application of active transient thermography numerical simulation. In this manner, the raised procedure is an ad-hoc hybrid method that integrates finite element simulation and machine learning models using different predictive feature sets and characteristics (i.e., regression, Gaussian regression, support vector machines, multilayer perceptron, and random forest). The performance results for each model were statistically analyzed, evaluated, and compared in terms of predictive performance, processing time, and outlier sensibility to facilitate the choice of a predictive method to obtain the thickness and length of an internal defect from thermographic monitoring. The best model to predictdefect thickness with six thermal features was interaction linear regression. To make predictive models for defect length and thickness, the best model was Gaussian process regression. However, models such as support vector machines also had significative advantages in terms of processing time and adequate performance for certain feature sets. In this way, the results showed that the predictive capability of some types of algorithms could allow for the detection and measurement of internal defects in materials produced by additive manufacturing using active thermography as a non-destructive test.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Active 3-D Thermography Based on Feature-Free Registration of Thermogram Sequence and 3-D Shape Via a Single Thermal Camera

Baoyuan Deng,Wentao Wu,Xiang Li,Hongjin Wang,Yunze He,Guoji Shen,Yongpeng Tang,Ke Zhou,Zhenjun Zhang,Yaonan Wang

DOI: https://doi.org/10.1109/tie.2021.3120471

IF: 7.7

2022-01-01

IEEE Transactions on Industrial Electronics

Abstract:Active three-dimensional(3-D) thermography combines 3-D shape and active thermography. Thus, it enables the provision of the intuitive thermographic inspection results for composite parts with a complex geometry. However, conventional 3-D thermography acquires thermographic information and 3-D shape through at least two independent sensors and requires complex cross-modal image registration algorithm based on the keypoint detection and matching. In this article, an active 3-D thermography system is proposed using only one thermal camera for moving objects. This system does not require an independent 3-D sensor while the thermal camera acts as the 3-D sensor. Nature behind that is that a mathematical model is proposed to unify the line scanning thermography and laser triangulation in the dynamic scanning process, taking a line laser as both heat excitation for active thermography and spatial coding for 3-D reconstruction. Furthermore, the model enables the feature-free registration of thermogram sequence and 3-D shape, so that the registration is fast and robust without keypoint features. The experiments on standard height specimens, 3-D printing glass fiber composites, and carbon fiber intake tube have shown the error is calibrated within 0.25 mm in the range of 1 to 150 mm and evidenced the capability for subsurface defects detection. The ease and robustness of the proposed active 3-D thermography have a bright future for 3-D measurement, defects detection, and quality control in the production line.
Rapid non-destructive inspection of sub-surface defects in 3D printed alumina through 30 layers with 7 μm depth resolution

C. Lapre,D. Brouczek,M. Schwentenwein,K. Neumann,N. Benson,C. R. Petersen,O. Bang,N. M. Israelsen

2024-03-27

Abstract:The use of additive manufacturing (AM) processes for industrial fabrication has grown rapidly over the last ten years. The most well-known AM technologies are fused deposition modelling and stereolithography techniques. One particular industry where 3D printing is advantageous over traditional fabrication techniques is within ceramic components due to its flexibility. To establish a new and improved level of print quality and reduce resource consumption in the 3D printing ceramics industry, there is a need for fast integrated, sub-surface and non-destructive inspection (NDI) with high resolution. Several techniques have already been developed for high-resolution NDI, such as X-ray computed tomography (XCT), but none of them are both fast, integrable, and non-destructive while allowing deep penetration with high resolution. In this study, we demonstrate sub-surface monitoring of 3D printed alumina parts to a depth of $\sim$0.7 mm in images of 400$\times$2048 pixels with a lateral resolution of 30$~\mu$m and depth (or axial) resolution of 7$~\mu$m . The results were achieved using mid-infrared optical coherence tomography (MIR OCT) based on a MIR supercontinuum laser with a 4$~\mu$m center wavelength. We find that it is possible to detect individual printed ceramic layers and track predefined defects through all four processing steps: green, preconditioned, debinded, and sintered. Our results also demonstrate how a defect in the green phase could affect the final product. Based on the understanding of how defects develop in maturing printed parts, we pave the way for NDI integration in AM, which can be combined with artificial intelligence and machine learning algorithms for automatic defect classification in volume production of a new standard of high quality ceramic components.

Optics
An In-Situ Deep Learning-Based Defect Detection Technology for Additive Manufacturing Process

Xiaoyi Chen,Hanzhong Zhang,Wei Wang,Peiren Wang,Min Chen,Ji Li

DOI: https://doi.org/10.1109/ICICM59499.2023.10366010

2023-10-20

Abstract:A trend in the additive manufacturing (AM) area is to deliver full-functional end-use products rather than discrete parts. Therefore, multiple manufacturing processes, additive or traditional, need to be combined to enable complex structure building, various material processing, and end-use functionality actualization. 3D electronics is a type of important product that such AM technologies can produce. However, the whole manufacturing procedure is much more complex than ever before, and any defect that occurs during this period may fail the product. To address the challenge, this paper proposes a deep learning-based defect detection technology to monitor the AM fabrication procedure in situ. An improved YOLOv8 algorithm is developed to train the defect detection model to identify and evaluate the defect image. A dataset of 3550 defects in four categories was created by selecting typical defects of the extrusion 3D printing process to testify to the practicability of this method. Experimental results showed that the improved YOLOv8 model achieves a mean average precision (mAP50) of 91.7% with a frame rate of 71.9 frames per second. In the future, this technology can be deployed on AM apparatus for real-time quality monitoring during the fabrication period. Moreover, depending on the detection results, printing settings can be adjusted real-timely to enhance the success rate of the printing process.

Materials Science,Computer Science,Engineering
Novel interventional electromagnetic thermography for subsurface defect detection

Ling Miao,Bin Gao,Haoran Li,Xiaolong Lu,Lei Liu,Wai Lok Woo,Jianhua Wu,Ling Miao,Bin Gao,Haoran Li,Xiaolong Lu,Lei Liu,Wai Lok Woo,Jianhua Wu

DOI: https://doi.org/10.1016/j.ijthermalsci.2022.107960

IF: 4.779

2023-02-01

International Journal of Thermal Sciences

Abstract:For low-emissivity metal materials, reducing the influence of non-uniform emission in detecting subsurface defects remains a challenge. This paper proposes a novel interventional electromagnetic thermography technique. In particular, a thin water film medium is involved in the detection which enhances the detectability of subsurface defects by utilizing the thermal radiation characteristic and thermophysical parameters of the participating medium. The physical mechanism of the proposed technique is analyzed in solid aspect. Static experiments have been carried out on the ferromagnetic plate with subsurface notches. The obtained results have shown that water film can eliminate the inhomogeneous emission of the detection target while the high emissivity of the water film corrects the temperature distribution. Moreover, dynamic scanning experiments have been conducted on the ferromagnetic plate containing artificial subsurface defects and the non-austenitic stainless-steel plate containing natural subsurface intergranular corrosion defect. The commonly used black paint is added to the dynamic experiment for performance comparison. The comparative experimental results have demonstrated that the proposed technique can effectively identify subsurface defects with burial depth up to 1.0 mm in the ferromagnetic plate. The results are especially more pronounced when the subsurface defects occur at buried depths ranging from 0.4 mm to 1.0 mm where higher thermal contrast and signal-to-noise ratio have been attained. The technique has shown superior detection performance for detecting natural subsurface microcrack.

engineering, mechanical,thermodynamics
Defect detection by multi-axis infrared process monitoring of laser beam directed energy deposition

T. Herzog,M. Brandt,A. Trinchi,A. Sola,C. Hagenlocher,A. Molotnikov

DOI: https://doi.org/10.1038/s41598-024-53931-2

IF: 4.6

2024-02-18

Scientific Reports

Abstract:Laser beam directed energy deposition (DED-LB) is an attractive additive manufacturing technique to produce versatile and complex 3D structures on demand, apply a cladding, or repair local defects. However, the quality of manufactured parts is difficult to assess by inspection prior to completion, and parts must be extensively inspected post-production to ensure conformance. Consequently, critical defects occurring during the build go undetected. In this work, a new monitoring system combining three infrared cameras along different optical axes capable of monitoring melt pool geometry and vertical displacement throughout deposition is reported. By combining multiple sensor data, an automated algorithm is developed which is capable of identifying the formation of structural features and defects. An intersecting, thin-walled geometry is used to demonstrate the capability of the system to detect process-induced porosity in samples with narrow intersection angles, which is validated using micro-CT observations. The recorded results indicate the root cause of this process-induced porosity at the intersection, and it is shown that advanced toolpath planning can eliminate such defects. The presented methodology demonstrates the value of multi-axis monitoring for identifying both defects and structural features, providing an advancement towards automated detection and alert systems in DED-LB.

multidisciplinary sciences
A Method for Automatic Surface Inspection Using a Model-Based 3D Descriptor

Carlos Madrigal,John Branch,Alejandro Restrepo,Domingo Mery

DOI: https://doi.org/10.3390/s17102262

IF: 3.9

2017-10-02

Sensors

Abstract:Automatic visual inspection allows for the identification of surface defects in manufactured parts. Nevertheless, when defects are on a sub-millimeter scale, detection and recognition are a challenge. This is particularly true when the defect generates topological deformations that are not shown with strong contrast in the 2D image. In this paper, we present a method for recognizing surface defects in 3D point clouds. Firstly, we propose a novel 3D local descriptor called the Model Point Feature Histogram (MPFH) for defect detection. Our descriptor is inspired from earlier descriptors such as the Point Feature Histogram (PFH). To construct the MPFH descriptor, the models that best fit the local surface and their normal vectors are estimated. For each surface model, its contribution weight to the formation of the surface region is calculated and from the relative difference between models of the same region a histogram is generated representing the underlying surface changes. Secondly, through a classification stage, the points on the surface are labeled according to five types of primitives and the defect is detected. Thirdly, the connected components of primitives are projected to a plane, forming a 2D image. Finally, 2D geometrical features are extracted and by a support vector machine, the defects are recognized. The database used is composed of 3D simulated surfaces and 3D reconstructions of defects in welding, artificial teeth, indentations in materials, ceramics and 3D models of defects. The quantitative and qualitative results showed that the proposed method of description is robust to noise and the scale factor, and it is sufficiently discriminative for detecting some surface defects. The performance evaluation of the proposed method was performed for a classification task of the 3D point cloud in primitives, reporting an accuracy of 95%, which is higher than for other state-of-art descriptors. The rate of recognition of defects was close to 94%.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A Real-Time Defect Detection Strategy for Additive Manufacturing Processes Based on Deep Learning and Machine Vision Technologies

Wei Wang,Peiren Wang,Hanzhong Zhang,Xiaoyi Chen,Guoqi Wang,Yang Lu,Min Chen,Haiyun Liu,Ji Li

DOI: https://doi.org/10.3390/mi15010028

IF: 3.4

2023-12-23

Micromachines

Abstract:Nowadays, additive manufacturing (AM) is advanced to deliver high-value end-use products rather than individual components. This evolution necessitates integrating multiple manufacturing processes to implement multi-material processing, much more complex structures, and the realization of end-user functionality. One significant product category that benefits from such advanced AM technologies is 3D microelectronics. However, the complexity of the entire manufacturing procedure and the various microstructures of 3D microelectronic products significantly intensified the risk of product failure due to fabrication defects. To respond to this challenge, this work presents a defect detection technology based on deep learning and machine vision for real-time monitoring of the AM fabrication process. We have proposed an enhanced YOLOv8 algorithm to train a defect detection model capable of identifying and evaluating defect images. To assess the feasibility of our approach, we took the extrusion 3D printing process as an application object and tailored a dataset comprising a total of 3550 images across four typical defect categories. Test results demonstrated that the improved YOLOv8 model achieved an impressive mean average precision (mAP50) of 91.7% at a frame rate of 71.9 frames per second.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Assisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography

Youssef AbouelNour,Nikhil Gupta

DOI: https://doi.org/10.1016/j.addma.2023.103483

IF: 11

2023-04-05

Additive Manufacturing

Abstract:Layer-wise in-process monitoring in Fused Filament Fabrication (FFF) 3D printing can facilitate the detection of defects introduced during manufacturing. In this work, optical imaging and infrared (IR) thermography were used simultaneously for the detection of embedded defects, such as point and line defects. The optical images helped in identifying the necessary variables that can lead to real-time defect detection through image correlation. Through temperature monitoring and thermal image analysis, defect detection was accomplished by comparing to a baseline. It was found that as the number of embedded defects increased in a specimen, the average specimen temperature, , increased. An increase in the number of defects by 2X and 5X led to an increase in that is ∼18X and 37X the relative standard error. There was also a positive correlation between the global average hotspot temperature, , and the total number of embedded defects in the specimen. This study demonstrates that in-situ defect detection can be accomplished using optical and thermal imaging systems.

engineering, manufacturing,materials science, multidisciplinary
Identification of a Ca2+/H+ antiport in the plant chloroplast thylakoid membrane

W. F. Ettinger,Anne Clear,Katheryn J. Fanning,M. Peck

DOI: https://doi.org/10.1104/PP.119.4.1379

IF: 7.4

1999-04-01

PLANT PHYSIOLOGY

Abstract:To assess the availability of Ca2+ in the lumen of the thylakoid membrane that is required to support the assembly of the oxygen-evolving complex of photosystem II, we have investigated the mechanism of 45Ca2+ transport into the lumen of pea (Pisum sativum) thylakoid membranes using silicone-oil centrifugation. Trans-thylakoid Ca2+ transport is dependent on light or, in the dark, on exogenously added ATP. Both light and ATP hydrolysis are coupled to Ca2+ transport through the formation of a transthylakoid pH gradient. The H+-transporting ionophores nigericin/K+ and carbonyl cyanide 3-chlorophenylhydrazone inhibit the transport of Ca2+. Thylakoid membranes are capable of accumulating up to 30 nmol Ca2+ mg-1 chlorophyll from external concentrations of 15 μM over the course of a 15-min reaction. These results are consistent with the presence of an active Ca2+/H+ antiport in the thylakoid membrane. Ca2+ transport across the thylakoid membrane has significant implications for chloroplast and plant Ca2+ homeostasis. We propose a model of chloroplast Ca2+ regulation whereby the activity of the Ca2+/H+ antiporter facilitates the light-dependent uptake of Ca2+ by chloroplasts and reduces stromal Ca2+ levels.
Defect detection of 3D printing surface based on geometric local domain features

Xinyue Zhao,Quanzhi Li,Menghan Xiao,Zaixing He

DOI: https://doi.org/10.1007/s00170-022-10662-w

2022-12-24

Abstract:The 3D printing process has advantages in the processing of complex parts, and its application is more and more extensive. However, the 3D printing process is still immature compared to traditional machining, it is more prone to produce defect products. Detecting defects on the surface of 3D printed parts is very important to ensure product quality. However, existing methods are barely capable to detect small 3D printing defects, as small defects are partially submerged by noise. In order to solve the problem, we proposed a novel method based on 3D machine vision to detect small 3D printing defects in this paper. The proposed method can be divided into two steps, potential defect regions extraction and accurate defect detection. Specifically, in the first stage, MBH (moving least squares smoothing and rough boundary removal-based Harris keypoint) and INRoPS (Improved Normal Rotated Projection Statistics) feature descriptor is proposed to extract the potential defect region, which has the advantages of robustness and high computational efficiency. In the second stage, a defect detection method based on neighborhood point calculation is proposed, which can accurately extract the complete shape of the defect. Experiments prove that the proposed method is more accurate and robust than other methods for both potential defect region extraction and precise defect detection.
A Novel Methodology to Predict 3-D Surface Temperature Field on Delamination for Thermography

Xiang Li,Hongjin Wang,Yunze He,Yaonan Wang

DOI: https://doi.org/10.1109/tii.2024.3386961

IF: 12.3

2024-01-01

IEEE Transactions on Industrial Informatics

Abstract:This article proposes a novel 3-D surface temperature prediction model based on the restored pseudoheat flux (RPHF) theory. The method can be used to simulate the temperature difference between the subsurface defect and the sound area. The proposed model shows the potential to investigate the detection limits associated with the defect features, such as depth, radius, diameter-to-depth ratio (D2dR), and excitation features, which is beneficial for the experimental design. Several experiments were conducted on specimens of different materials [glass fiber reinforced plastic (GFRP), CFRP, and rubber] using RPHF thermography to validate the practicality of the model. The comparative analysis is also conducted with other methods. Both experimental and simulation results demonstrated that longer heating is required for deeper defects and the moment of maximum temperature difference tends to appear after the heating has stopped. Probability of detection (PoD) was used as an index to assess the reliability of the methodology and the problems found. The depth of the defect has a greater influence on thermal detection than D2dR.
Toward the digital twin of additive manufacturing: Integrating thermal simulations, sensing, and analytics to detect process faults

Aniruddha Gaikwad,Reza Yavari,Mohammad Montazeri,Kevin Cole,Linkan Bian,Prahalada Rao

DOI: https://doi.org/10.1080/24725854.2019.1701753

2020-01-24

IISE Transactions

Abstract:The goal of this work is to achieve the defect-free production of parts made using Additive Manufacturing (AM) processes. As a step towards this goal, the objective is to detect flaws in AM parts during the process by combining predictions from a physical model (simulation) with in-situ sensor signatures in a machine learning framework. We hypothesize that flaws in AM parts are detected with significantly higher statistical fidelity (F-score) when both in-situ sensor data and theoretical predictions are pooled together in a machine learning model, compared to an approach that is based exclusively on machine learning of sensor data (black-box model) or physics-based predictions (white-box model). We test the hypothesized efficacy of such a gray-box model or digital twin approach in the context of the laser powder bed fusion (LPBF) and directed energy deposition (DED) AM processes. For example, in the DED process, we first predicted the instantaneous spatiotemporal distribution of temperature in a thin-wall titanium alloy part using a computational heat transfer model based on graph theory. Subsequently, we combined the preceding physics-derived thermal trends with in-situ temperature measurements obtained from a pyrometer in a readily implemented supervised machine learning framework (support vector machine). We demonstrate that the integration of temperature predictions from an ab initio heat transfer model and in-situ sensor data is capable of detecting flaws in the DED-produced thin-wall part with F-score approaching 90%. By contrast, the F-score decreases to nearly 80% when either temperature measurements from the in-situ sensor or temperature distribution predictions from the theoretical model are used alone by themselves. This work thus demonstrates an early foray into the digital twin paradigm for real-time process monitoring in AM via seamless integration of physics-based modeling (simulation), in-situ sensing, and data analytics (machine learning).

engineering, industrial,operations research & management science
Non-contact imaging of subsurface defects using a scanning laser source

Takahiro Hayashi,Naoki Mori,Tomotake Ueno

DOI: https://doi.org/10.1016/j.ultras.2021.106560

IF: 4.2

Ultrasonics

Abstract:The quality of additive manufacturing (AM) components must be guaranteed to ensure wide applicability, and a nondestructive inspection technology is required in this regard. Therefore, this study examined a method for detecting subsurface defects using ultrasonic waves excited by a laser. Fundamental experiments showed that wideband ultrasonic waves can be excited with a suitable signal-to-noise ratio using high-repetition laser pulses. Images of subsurface defects were appropriately obtained using a scanning laser source (SLS) with broadband waves for an aluminum alloy flat plate with artificial defects. The imaging experiments showed that the acquisition condition depends on the local defect resonant (LDR) frequency in the defective part. The imaging technique also enabled to detect subsurface circular defects created by AM with the diameter below 1.0 mm that were undetectably small in our previous study using the SLS. Based on results of these experiments and a finite element analysis, the following guideline is proposed: the LDR frequencies of targeted defects must be included in the tested frequency range.
Investigation of reconstructed three-dimensional active infrared thermography of buried defects: multiphysics finite elements modelling investigation with initial experimental validation

Charlie O’Mahony,Aladin Mani,Sarah Markham,Ehstham ul Haq,Christophe Silien,Joanna Bauer,Syed A. M. Tofail

DOI: https://doi.org/10.1007/s10973-020-09678-9

IF: 4.755

2020-04-27

Journal of Thermal Analysis and Calorimetry

Abstract:In this paper, we use a Multiphysics approach in COMSOL™ Platform to develop and validate a finite element model that simulates thermal images obtained in active thermography mode. This approach allows variation in material properties, the selection of active thermography methods such as Flash, Pulse Phase & Lock-in techniques, source wavelength, depth and dimensions of defect. We then take experimental thermography images of a defect embedded into a PLA block to compare with simulated images generated by the Multiphysics model. Our work shows the feasibility of real-time three-dimensional (3D) active infrared thermography (IRT) of buried defects. Such imaging can be hugely beneficial not only in quality control and process optimisation in additive manufacturing but also determination of shape and outline of tumours and plaques in medical applications.

chemistry, physical, analytical,thermodynamics
Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures

Reza Souri-Solut,Mohammadreza Farahani,Pouria Meshkizadeh,Saeed Asghari

DOI: https://doi.org/10.1007/s10921-023-01006-z

2023-11-08

Journal of Nondestructive Evaluation

Abstract:This research examines the efficacy of thermography as a means of detecting debonding flaws in honeycomb structures. A comparative analysis was conducted on multiple heating regimes to assess their effectiveness in detecting artificially created flaws in honeycomb sandwich panels made of aluminum alloy with varying thicknesses. The data acquired from each heating technique was analyzed utilizing a range of established algorithms. In addition to well-known approaches for processing Thermography data, a modification of the Thermal Constant Method is suggested. The advantages and limits of each technique are examined and demonstrated through the processed images. Subsequently, the performance of the applied techniques is quantitatively compared by utilizing the Signal-to-Noise ratio (SNR). A threshold was set for the SNR value to determine the number of detectable defects in each image. The number of detectable defects was then quantified, and the average SNR of these identified defects was utilized as a metric to evaluate and compare the effectiveness of different algorithms in enhancing the contrast between defect and sound regions. The comparison stated herein reveals the advantages of using phasegrams, amplitude images, and various frequencies for thermography methods depending on different circumstances.

materials science, characterization & testing

NEUTROPENIA AND THROMBOCYTOPENIA AFTER REPEATED COURSES OF LEUCOCYTE INTERFERON

Visual Detection of Surface Defects Based on Self-Feature Comparison in Robot 3-D Printing

Online Quality Monitoring in Material Extrusion Additive Manufacturing Processes Based on Laser Scanning Technology

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Automated Defect Recognition for Additive Manufactured Parts Using Machine Perception and Visual Saliency

Predictive Models for the Characterization of Internal Defects in Additive Materials from Active Thermography Sequences Supported by Machine Learning Methods

Active 3-D Thermography Based on Feature-Free Registration of Thermogram Sequence and 3-D Shape Via a Single Thermal Camera

Rapid non-destructive inspection of sub-surface defects in 3D printed alumina through 30 layers with 7 μm depth resolution

An In-Situ Deep Learning-Based Defect Detection Technology for Additive Manufacturing Process

Novel interventional electromagnetic thermography for subsurface defect detection

Defect detection by multi-axis infrared process monitoring of laser beam directed energy deposition

A Method for Automatic Surface Inspection Using a Model-Based 3D Descriptor

A Real-Time Defect Detection Strategy for Additive Manufacturing Processes Based on Deep Learning and Machine Vision Technologies

Assisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography

Identification of a Ca2+/H+ antiport in the plant chloroplast thylakoid membrane

Defect detection of 3D printing surface based on geometric local domain features

A Novel Methodology to Predict 3-D Surface Temperature Field on Delamination for Thermography

Toward the digital twin of additive manufacturing: Integrating thermal simulations, sensing, and analytics to detect process faults

Non-contact imaging of subsurface defects using a scanning laser source

Investigation of reconstructed three-dimensional active infrared thermography of buried defects: multiphysics finite elements modelling investigation with initial experimental validation

Investigating the Excellence of Different Thermography Approaches to Subsurface Dis-bonds Detection in Aluminum Honeycomb Sandwich Structures