Abstract:Magnesium (Mg) and its alloys offer great potential for reducing vehicular mass and energy consumption due to their inherently low densities. Historically, widespread applicability has been limited by low strength properties compared to other structural Al-, Ti- and Fe-based alloys. However, recent studies have demonstrated high-specific-strength in a number of nanocrystalline Mg-alloys. Even so, applications of these alloys would be restricted to low-temperature automotive components due to microstructural instability under high temperature creep loading. Hence, this work aims to gain a better understanding of creep and associated deformation behavior of columnar nanocrystalline Mg and Mg-yttrium (Y) (up to 3at.%Y(10wt.%Y)) with a grain size of 5 nm and 10 nm. Using molecular dynamics (MD) simulations, nanocrystalline magnesium with and without local concentrations of yttrium is subjected to constant-stress loading ranging from 0 to 500 MPa at different initial temperatures ranging from 473 to 723 K. In pure Mg, the analyses of the diffusion coefficient and energy barrier reveal that at lower temperatures (i.e., T < ~423K) the contribution of grain boundary diffusion to the overall creep deformation is stronger that the contribution of lattice diffusion. However, at higher temperatures (T > ~423K) lattice diffusion dominates the overall creep behavior. Interestingly, for the first time, we have shown that the(101-1),(101-2),(101-3) and (101-6) boundary sliding energy is reduced with the addition of yttrium. This softening effect in the presence of yttrium suggests that the experimentally observed high temperature beneficial effects of yttrium addition is likely to be attributed to some combination of other reported creep strengthening mechanisms or phenomena such as formation of stable yttrium oxides at grain boundaries or increased forest dislocation-based hardening.

On the dependence of creep-induced dislocation configurations on crystallographic orientation in pure Al and Al-Mg

Dislocation substructures in pure aluminium after creep deformation as studied by electron backscatter diffraction

Inconsistent creep between dendrite core and interdendritic region under different degrees of elemental inhomogeneity in nickel-based single crystal superalloys

Statistical Comparison of Substructures in Pure Aluminum Before and After Creep Deformation, Based on EBSD Image Data

Microstructure and Dislocation Structure Evolution During Creep Life of Ni-based Single Crystal Superalloys

On the influence of grain morphology on creep deformation and damage mechanisms in directionally solidified and oxide dispersion strengthened superalloys

Influence of crystal orientations on the creep fracture of a nickel-based single crystal superalloy

Quantitative investigation on the individual contribution of twinning and dislocation slip to creep in dilute Mg-Y alloys with various grain sizes

Cavitation and Grain Boundary Sliding During Creep of Mg-Y-Nd-Zn-Mn Alloy

Study on the microstructures and tensile creep behaviors of extruded dilute Mg–Mn–Zn alloys

Atomic-scale investigation of creep behavior in nanocrystalline Mg and Mg-Y alloys

An investigation on creep deformation and mechanical properties of a polycrystalline Fe-based alloy: a molecular dynamics study

Structural Evolution and Transitions of Mechanisms in Creep Deformation of Nanocrystalline FeCrAl Alloys.

The Grain Size and Orientation Dependence of Geometrically Necessary Dislocations in Polycrystalline Aluminum During Monotonic Deformation: Relationship to Mechanical Behavior

On the Relationship Between Dislocation Creep Strength and Microstructure of a Solid-Solution-Strengthened Ni-Base Superalloy

Dependence of strain rate sensitivity upon deformed microstructures in nanocrystalline Cu

Microstructural Investigation Of The Failure Mechanisms After Creep Exposure Of Mg-Y-Nd-Zn-Mn Alloy

Co-deformation Between the Metallic Matrix and Intermetallic Phases in a Creep-Resistant Mg-3.68Al-3.8Ca Alloy

Effect of pre-straining treatment on high temperature creep behavior of Ni-based single crystal superalloys

Tension–compression creep asymmetry in strong-textural Mg-RE alloy due to dislocation reconfiguration

High-Temperature Creep Behavior of a Nickel-Based Single-Crystal Superalloy with Small-Angle Deviation from [111] Orientation