The colonization of cartilage and ligaments by Trypanosoma cruzi.

P. Lagrange,K. Calabrese,A. Alencar,S. C. D. da Costa

DOI: https://doi.org/10.1590/S0074-02761992000500024

Memórias do Instituto Oswaldo Cruz

Abstract:

What problem does this paper attempt to address?

Study on Mechanical Properties of Deep Expansive Soil and Coupling Damage Model of Freeze–Thaw Action and Loading

Zhuliang Zhu,Bin Lin,Shiwei Chen

DOI: https://doi.org/10.3390/app131911099

2023-01-01

Abstract:This study is primarily intended to present a damage constitutive equation under the combined action of confining pressures and freeze–thaw cycles by subjecting deep expansive clay to the consolidated undrained triaxial tests. We study the influence of the numbers of freeze–thaw cycles on various mechanical indexes of soil by using the TSZ-2 instrument (fully automatic triaxial instrument). As the number of freeze–thaw cycles increases, the ultimate peak stress of the soil decreases, and then, the effect of the freeze–thaw effect on the shear strength gradually weakened. By combining the expression method of the damage variable under the action of loading alone with the expression method under the action of freeze–thaw cycles alone, we brought in the damage evolution equation to obtain the damage constitutive equation under the combined action of confining pressures and freeze–thaw cycles. The stress values under three confining pressures (100 kPa, 200 kPa, and 300 kPa) can be determined by using the final damage constitutive model. The measured data with a water content of 17% and six freeze–thaw cycles were compared with the theoretical data. The actual strength values were 118.4 kPa, 152.3 kPa, and 184.1 kPa, and the theoretical strength values were 120 kPa, 150 kPa, and 186 kPa. The fitting degree of the strength value was as high as 99%, which verifies the feasibility of this model. This study can serve as an available reference for well wall construction and disaster prediction in deep coal mining.
Analysis of mechanical properties and deterioration mechanisms of mudstone under wetting-drying cycles

Zhenwei Wang,Jiayi Shi,Kuo Ding,Shiya Chen,Xiaomou Jiang,Chenpeng Shen

DOI: https://doi.org/10.1080/15376494.2024.2392634

2024-09-20

Mechanics of Advanced Materials and Structures

Abstract:During seasonal rainfall periods, natural rocks typically undergo repeated wetting-drying cycles, which directly affects the micro-structure of the rock samples and consequently leads to the deterioration of their mechanical properties, especially in mudstone. Therefore, this paper investigated the degradation pattern of strength parameters and failure pattern of mudstone samples under wetting-drying cycles through a series of laboratory tests and quantitatively characterized the micro-structural changes in the samples. Additionally, numerical simulations were utilized to delve deeper into the degradation mechanism of the samples. The results indicate that with an increasing number of wetting-drying cycles, the degradation of peak strength and elastic modulus becomes more pronounced. Moreover, there is a continuous increase in micro-porosity within the samples, accompanied by changes in pore structure and morphology. According to the simulation results, the wetting-drying cycles change how the samples fail, transitioning from mixed tensile-shear failure to predominantly shear failure. This study not only deepens the theoretical understanding of the deterioration mechanisms in mudstone but also provides important guidance for practical applications.

materials science, multidisciplinary,mechanics, composites, characterization & testing
Shear strength model of unsaturated frozen soil based on soil freezing characteristic and soil water characteristic

Huie Chen,Qi Ding,Haotian Guo,Jinfeng Li,Xiang Gao,Sitan Li

DOI: https://doi.org/10.1016/j.coldregions.2024.104132

IF: 4.427

2024-01-24

Cold Regions Science and Technology

Abstract:The strength characteristics of unsaturated soil after freezing significantly influence the safety of engineering construction in frozen soil regions. In this study, the soil freezing characteristic curve (SFCC) and soil water characteristic curve (SWCC) of unsaturated lean clay were tested. Based on the similarity between SFCC and SWCC, the unfrozen water content of SFCC was used to replace the water content of the SWCC to obtain the expression for soil suction under different negative temperatures. A shear strength model of unsaturated frozen soil was established. According to unsaturated triaxial tests under different conditions, the effectiveness of the established unsaturated soil shear strength model was verified. The test results show that in the rapid freezing stage of the SFCC, the volumetric unfrozen water content with an initial matrix suction of 57 kPa exhibited the largest rate of change. The stress-strain curve of soil at positive temperature is strain hardening type, and that at negative temperature presents different types under the influence of temperature, initial matrix suction and confining pressure. The effective cohesion and internal friction angle of soil varied significantly under the influence of temperature and initial matrix suction. When the initial matrix suction was constant, the unsaturated shear strength of the soil increased nonlinearly with a decrease in temperature. When the temperature was ≥−5 °C, the shear strength increased with an increase in initial matrix suction, but decreased when the temperature was ≤−5 °C. The model fitting results were consistent with the measured results of the unsaturated triaxial test, which verifies the validity of the model. This research can provide a reference for studying the mechanical characteristics of unsaturated frozen soil under negative temperature.

engineering, environmental, civil,geosciences, multidisciplinary
Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Jingyu CHEN,Yuanqiang CAI,Zhigang CAO,Fuyou LI,Chuan GU

DOI: https://doi.org/10.13722/j.cnki.jrme.2018.0274

2018-01-01

Abstract:The large-scale triaxial apparatus GDS was upgraded with an unsaturated testing module to study the long-term dynamic characteristics of unsaturated road base and subbase materials. The testing materials were taken from a common quarry in Zhejiang Province and mixed with kaolin at a mass ratio 3% to simulate the actual road base and subbase materials. During the tests,the axis-translation method was used to control the matric suction. A series of large-scale cyclic triaxial tests were conducted on the crushed tuff aggregate mixtures under four initial matric suctions and two cyclic stress amplitudes. Special attention was paid to the effects of the initial matric suction on the accumulated axial strain and resilient modulus. The testing results indicate that the soil-water characteristic curve(SWCC) of the unsaturated materials presents a hysteresis phenomenon in the water retention tests. For the same matric suction,the moisture content in the drying path is higher than that in the wetting path. Under cyclic loadings,the resilient modulus increases with the increasing of matric suction. The influence of initial matric suction on resilient modulus is more obvious at smaller matric suctions(0–30 k Pa) than at larger matric suctions. The accumulated axial strain decreases with the increasing of matric suction,and the decreasing rate also declines with the increasing of matric suction. A nonlinear relationship exists between the accumulated axial strain and matric suction,and a linear relationship exists between the accumulated axial strain and moisture content.
Study on the effect of water on the shear behavior and microstructure of red mudstone

Qingyu Xie,Qiangbing Huang,Xiaosen Kang,Shaoyan Wu,Hengxing Lan

DOI: https://doi.org/10.1038/s41598-024-78710-x

IF: 4.6

2024-12-03

Scientific Reports

Abstract:Red mudstone has significant hydrophilicity, that is hard at low water contents and soft and unstable at high water contents, and understanding the whole range of water content on the shear behavior of red mudstone is critical for evaluating red beds landslide stability. However, the deterioration mechanism of red mudstone in the process of gradual humidification is not clear in the whole range of water content. In this study, a series of mechanical and microscopic tests were carried out in the whole range of water content. A mechanical behavior prediction model for the entire process under the coupling of initial damage and load damage was constructed. The results show that the deterioration of shear strength, elastic modulus and strength parameters conforms to the "logistic model" curve with the increase of water content in the whole range of water content. In addition, the water sensitivity of cohesion was higher than the internal friction angle, and it gradually stabilized as water content increased. The weakening mechanism of the mechanical strength in the accelerated decline stage is the initiation and propagation of microcracks caused by mineral expansion, which leads to the corresponding shear behavior. Finally, the constructed damage model can be transformed into different yield conditions through parameter changes. The introduction of coupling damage enables the model to more accurately describe and predict the accelerated attenuation stage of red mudstone in the process of gradual humidification in the whole range of water content.

multidisciplinary sciences
Effect of Temperature on the Strength Characteristics of Unsaturated Silty Clay in Seasonal Frozen Region

Huie Chen,Haotian Guo,Xiaoqing Yuan,Yating Chen,Chao Sun

DOI: https://doi.org/10.1007/s12205-020-1974-1

IF: 2.115

2020-07-21

KSCE Journal of Civil Engineering

Abstract:The strength characteristics of unsaturated silty clay after the cooling and single freeze-thaw cycle were studied by using Global Digital Systems Ltd. (GDS) triaxial test system after controlling initial matric suction. The results demonstrate that, the initial matrix suction and freezing process can strengthen the shear strength of the soil, which makes the stress-strain curve of the soil show certain strain hardening characteristics at different temperatures. when the temperature is negative (including 0°C), the curve has a flat transition section whose strength does not change with deformation, and the flat transition section becomes shorter as the temperature and confining pressure decrease. The strength of the soil at negative temperature and the speed at which it reaches its peak value are much greater than those of the soil after positive temperature and single freeze-thaw cycle, and the contribution of confining pressure to the strength decreases with the decrease of temperature. The effect of temperature change (15°C to −15°C) on soil strength is mainly reflected in the total cohesion, and the effect of freeze-thaw on the effective internal friction angle is more significant. The strength and deformation characteristics of soil under the freezing process and freeze-thaw cycle are determined by the initial matric suction, the form of connection between soil particles, the migration of unfrozen water, and the degree of water-ice phase transformation.

engineering, civil
Experimental and Numerical Simulation Study on the Influence of Gaseous Water on the Mechanical Properties of Red-Layer Mudstone in Central Sichuan

Kang Huang,Fei Yu,Wei Zhang,Kaiwen Tong,Shichang Li,Jianhua Guo,Shanxiong Chen,Zhangjun Dai

DOI: https://doi.org/10.1007/s00603-023-03228-z

IF: 6.518

2023-01-24

Rock Mechanics and Rock Engineering

Abstract:Water has a significant effect on the mechanical properties of rocks, especially those containing expansive clay minerals. The red-layer mudstone contains various clay minerals, which easily collapse in water. To further study the effect of water on the mechanical properties of red-layer mudstone, uniaxial and triaxial tests were first conducted on samples with different moisture contents, prepared using the gaseous moisture absorption method in the laboratory. The effect of water on the fracture mode, mechanical behaviour and strength of the red-layer mudstone was subsequently studied at a heterogeneous particle scale using the three-dimensional numerical simulation program 3DEC. The results demonstrated that the strengths of the mudstone samples (uniaxial compressive and triaxial compressive strengths) decreased with an increase in the moisture content. As the moisture content increased, the elastic modulus and residual strength of mudstone decreased. The Mohr–Coulomb strength envelope under different moisture contents was constructed, and it was found that with an increase in the moisture content, the cohesion of the mudstone decreased significantly and the internal friction angle remained almost unchanged. This numerical model accurately demonstrates the damage evolution (tensile and shear cracks) at a heterogeneous particle scale. Simultaneously, the macroscopic mechanical behaviour, strength and failure patterns observed in the laboratory were reproduced. Finally, this study reveals the weakening mechanism of water on the mechanical properties of red-layer mudstone at macroscopic and Ümesoscopic scales.

geosciences, multidisciplinary,engineering, geological
Study on dynamic mechanical response characteristics and fracture energy dissipation mechanism of sandstones with different saturations under real-time low temperature

Ming Li,Hao Yu,Jiazhi Zhang,Gang Lin,Lianying Zhang,Yanlong Chen,Fuqiang Zhu,Yiwen Mao,Hang Chen,Zhengbang Ding,Yihang Liang

DOI: https://doi.org/10.1007/s40948-023-00622-3

2023-06-06

Geomechanics and Geophysics for Geo-Energy and Geo-Resources

Abstract:It is of great significance to study the mechanical properties of rocks with different saturations for safe and efficient development of geotechnical engineering in low-temperature environments, such as open-pit mining and tunnel excavation in winter in cold areas, and etc. In this paper, the LT-SHPB test system was used to carry out impact loading tests for sandstones with various saturations at − 20 °C environment. SEM was used to observe the cross-sectional characteristics of the specimens. The distributions of fragments were obtained by screening after impact failure. The energy dissipation model was established during the failure process. The research results indicated that the failure strength, elastic modulus, and peak strain of sandstones showed significant strain rate strengthening. Under the fixed strain rate, as the increase of the water content, the failure strength and elastic modulus and the sensitivity increased first and then decreased, while the peak strain showed the opposite change characteristics. 75% saturation was the turning point of the change. The sandstones under saturated water content exhibited remarkable ductile failure characteristics, while the brittle failure dominated in other conditions. The fundamental reason for this change was the difference between the freezing and frost heave effects of water-bearing specimens under low temperature conditions. The change characteristics of the macroscopic damage degree of sandstones with the strain rate and water content were basically the same as the characteristics of mechanical properties. The higher the internal density, the more the dissipated energy and surface specific energy for the whole failure of the specimen. The energy dissipation difference could directly change the macroscopic failure characteristics.

energy & fuels,geosciences, multidisciplinary,engineering, geological
Study on time-effect to the strength deterioration of carbonaceous mudstone under water-rock interaction

Peng Mo,Qiongzhen Tang,Junhui Luo,Haifeng Huang,Qing Yang,Yu Chen

DOI: https://doi.org/10.1590/1517-7076-rmat-2023-0166

2023-01-01

Matéria (Rio de Janeiro)

Abstract:While excavation activities in mountain terrain regions, the exposure of carbonaceous mudstone could deteriorate the strength under the water-rock interaction, which impacts slope stability and affects the safety of the engineering project. The present study conducted the Point Loading Test (PLT), Acoustic Emission (AE), and Scanning Electron Microscope (SEM) to investigate the degradation of its mechanical properties under the water-rock interaction. The results reveal that: (1) The Total Organic Carbon (TOC) content and water content correspond to a negative correlation, and the carbonaceous mudstone possesses a softening boundary which makes the mudstone strength decay rapidly resulting in the strength decrease by 80% once the water content exceeds the boundary value; (2) Water-rock interaction weakens the acoustic emission capacity and the acoustic emission characteristic in the failure process of carbonaceous mudstone with different TOC can reflect the influence of water-rock interaction on its macroscopic strength and fracture structure deterioration, and the damage degree under immersion is over 50%; (3) The inhomogeneity of water-rock interaction causes unbalanced forces in the rock, as dissolved soluble minerals and oxidation-reduction of organic matter accelerate the deterioration of carbonaceous mudstone making the water-rock interaction is slowed down by the water-swelling filling of minerals in a time period. Therefore, this study has investigated the strength deterioration of carbonaceous mudstone subjected to water-rock interaction from macro-scale and micro-scale perspectives, which provides a reference for preventing and controlling carbonaceous mudstone deterioration resulting from catastrophes.

materials science, multidisciplinary
Mechanical Properties and Deterioration Mechanism of Remolded Carbonaceous Mudstone Exposed to Wetting–Drying Cycles

Yu-Ling Yang,Tao Zhang,Song-Yu Liu,Jun-Hui Luo

DOI: https://doi.org/10.1007/s00603-022-02833-8

IF: 6.518

2022-03-12

Rock Mechanics and Rock Engineering

Abstract:Carbonaceous mudstone suffers intrusion of wetting–drying cycles in the period of seasonal rainfall, leading to a serious threat to the stability of the related infrastructures. The presented study aims to obtain insight into the mechanical properties and deterioration mechanism of carbonaceous mudstone exposed to wetting–drying cycles. A series of laboratory tests were conducted to determine the stress–strain curve, unconfined compressive strength qu, residual strength σr, shear strength τf, cohesion c, and friction angle φ of the remolded carbonaceous mudstone samples with various cycles. The results showed that the stress–strain characteristic gradually changed from 'brittle' to 'ductile' with an increase in wetting–drying cycles. Both qu and τf presented dramatic decrease within the first 10 cycles, and then they reached a relatively stable value, indicating effective engineering measures should be conducted before this stable stage to prevent failure of the carbonaceous mudstone. The σr value exhibited a contrary trend to that of qu, which can be captured using the exponential function. Two strength parameters, c and φ, decreased with the increasing wetting–drying cycles. Scanning electron microscope analysis indicated that after suffering wetting–drying cycles, carbonaceous mudstone possessed an unstable micro-structure with larger pore size and layer spacing. This was mainly attributed to the swelling/shrinkage behavior of clay minerals, which facilitated the development of tensile stress in carbonaceous mudstone. The loss or dissolution of soluble minerals/salts yielded negative impacts on the stability of micro-structure and accelerated the deterioration of mechanical properties. Additional micro-chemical analysis was suggested to quantitatively evaluate the mineralogy and pore profile characteristics of carbonaceous mudstone with wetting–drying cycles.

geosciences, multidisciplinary,engineering, geological
Mechanical properties and damage constitutive model of silty mudstone under heating and water-cooling cycles

Hongyuan Fu,Xiaowei Yu,Ling Zeng,Jintao Luo,Jie Liu

DOI: https://doi.org/10.1007/s11440-023-02225-4

2024-02-27

Acta Geotechnica

Abstract:Understanding the deformation and damage behaviors of soft rocks under temperatures and water–rock interactions is crucial for designing rock engineering structures and for assessing geotechnical disasters. Hence, the physical–mechanical characteristics and damage mechanisms of silty mudstone under heating and water-cooling cycles were determined by a series of laboratory tests. The results indicate that heating and water-cooling treatments prompt crack development within silty mudstone, observable through volume augmentation along with reductions in mass, density, and P-wave velocity. The interconnections between the decrease of mechanical properties such as elastic modulus, cohesion, and internal friction angle of silty mudstone and the factors including temperatures and cycle number are explicitly established. The deterioration of the physical–mechanical properties of silty mudstone primarily arises from the thermal expansion, dehydration, and hydrolysis of mineral constituents. Furthermore, a new damage constitutive model for silty mudstone considering temperature and the number of heating and water-cooling cycles is established based on lognormal distribution and the Mohr–Coulomb criterion. Additionally, the model parameters S 0 and F 0 characterize the homogeneity and average strength, enabling a quantitative assessment of the damage degree of rocks.

engineering, geological
Study on the Influence of Temperature and Water Content on the Static Mechanical Properties of Sandstone

Xiaojun Zhang,Maolin He,Zhuo Li,Yongsheng Jia,Wenxue Gao

DOI: https://doi.org/10.3390/ma17143399

2024-07-09

Abstract:The area of permafrost worldwide accounts for approximately 20% to 25% of land area. In cold-climate regions of China, which are garnering international attention, the study of low-temperature and moisture effects on rock mass mechanical properties is of significant importance. China has a wide area of cold regions. This research can provide a foundation for China's exploration activities in such extreme environments. This paper examines the mechanical behavior of rock specimens subjected to various low temperatures and water contents through uniaxial compression tests. The analysis encompasses failure modes, stress-strain relationships, uniaxial compressive strength (UCS), and elastic modulus (EM) of these specimens. Findings reveal that at lower temperatures, the rock specimens' fracture patterns transition from compressive shear failure to cleavage failure, reflecting a shift from a plastic-elastic-plastic to a plastic-elastic response. Specifically, saturated rocks exhibit a 40.8% decrease in UCS and an 11.4% reduction in EM compared to their dry counterparts. Additionally, in cold conditions, an increased water content in rocks primarily leads to vertical cracking. Under such conditions, saturated rocks show a 52.3% decline in UCS and a 15.2% reduction in EM, relative to their dry state.
Influences of Bedding Angle and Soaking Time on the Mechanical Behaviour of Silty Mudstone: Laboratory Testing and Theoretical Modelling

Guang-Tao Yu,Hong-Yuan Fu,Qian-Feng Gao,Ling Zeng,Jia-Jun Li

DOI: https://doi.org/10.1144/qjegh2023-126

2024-04-22

Quarterly Journal of Engineering Geology and Hydrogeology

Abstract:Silty mudstone is highly susceptible to the influence of hot and humid environments, leading to the deterioration of its mechanical properties presenting a geohazard and even resulting in geological disasters. Accurately characterizing the effects of bedding and water-rock interaction on the mechanical behavior of silty mudstone is a crucial prerequisite for the protection and reinforcement of silty mudstone slopes. To this end, uniaxial compression tests and Brazilian splitting tests were conducted to examine the mechanical properties of bedded silty mudstone. Based on the test results, the effects of bedding angle and soaking time on mechanical properties such as tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone were revealed. The test results showed that the tensile strength increased exponentially with increasing bedding angle. The observed split failure patterns of bedded silty mudstone encompassed splitting-pulling damage, shear damage, and splitting damage. The uniaxial compressive strength of silty mudstone exhibited a U-shaped variation with an increase in bedding angle. The specimen with a bedding angle of 45° had the lowest uniaxial compressive strength at 7.64 MPa. Furthermore, the elastic modulus of silty mudstone was positively correlated with the bedding angle. The failure patterns of bedded silty mudstone under uniaxial compression included splitting-tension damage, shear-slip damage, and splitting-shear damage. The saturated tensile strength, uniaxial compressive strength and elastic modulus of bedded silty mudstone exhibited an exponential decrease with increasing soaking time. The test data confirmed the applicability of the Jaeger equation to the uniaxial compressive strength of bedded silty mudstone. Subsequently, a modified Hoek-Brown failure criterion was derived by combining fracture mechanics theory and test results and introducing a softening factor. The parameters A , D and m in the above failure criterion decreased exponentially with increasing soaking time and a empirical Hooke-Brown failure criterion considering the soaking time was established. Compared with previous theoretical models, this model is more adaptable to the actual engineering situation, which results in more accurate calculations.

geosciences, multidisciplinary,engineering, geological
Shear Mechanical and Permeability Properties of Deep Rock Mass under Thermal-Hydraulic-Mechanical Coupling

Zhi-Nan Lin,Shi-Hong Feng,Jia-Quan Wang,Qiang Zhang,Haifeng Long

DOI: https://doi.org/10.1109/ichceswidr54323.2021.9656263

2021-11-06

Abstract:For the deep fractured rock mass, a variety of factors determine its mechanical properties, such as high in-situ stress, high seepage pressure and high temperature, etc. A series of shear experiments on saturated sandstone under different normal stress, seepage pressures were carried out, which had conducted five heat-water treatments. The setting max temperatures were 100, 300 and 400°C. The seepage pressure is constantly selected to be 5 MPa, while the normal stresses are 10, 15, and 20 MPa, respectively. The shear-seepage characteristics of sandstone under hydraulic-mechanical coupling were studied. The peak shear stress and its corresponding peak shear deformation increase with the increase of normal stress; with the increase of normal stress, the shear strength of specimen increases nearly nonlinearly. With the increase of temperature and water seepage pressure, the shear strength and the corresponding peak shear deformation will decrease. The weakening effect of seepage pressure on its shear mechanics was analysed. The study can provide a scientific theoretical basis for rock strength damage mechanism and disaster control under thermal-hydraulic-mechanical coupling in deep rock engineering.
Effects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture

Yu Zhang,Junyuan Lu,Wei Han,Yawen Xiong,Jinsong Qian

DOI: https://doi.org/10.3390/ma16020567

IF: 3.4

2023-01-07

Materials

Abstract:Soil-rock mixture is a commonly used geotechnical material used in many construction projects, such as slopes, tunnels, and dams. The shear strength of soil-rock mixture is its key property and is affected by many factors. This study aimed to investigate the shear strength characteristics of soil-rock mixture and the influences of moisture and stone content on shear strength parameters. Soil-rock mixture samples with four different stone and moisture contents were fabricated and tested using a large-scale direct shear test apparatus under four vertical pressures. The results demonstrated that the shear properties of the soil-rock mixture showed significant Mohr Coulomb failure criteria for all stone contents. As the moisture content increased, the shear strength of the soil-rock mixture first increased by 10~18% and then decreased after w = 12% to the residue value. The change in cohesion and internal friction angle of soil-rock mixture with different moisture contents shared a similar trend. For w 12%, the two indexes obviously decreased. As the stone content increased from 30% to 60%, the shear strength of the soil-rock mixture increased by 82~174%. The internal friction angle increased linearly with stone content, while the cohesion of the mixture first increased and then decreased after the stone content reached 50%. The results can help in the designation and application of soil-rock mixture.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Water absorption/dehydration by NMR and mechanical response for weakly cemented mudstones subjected to different humidity conditions

Shuai Wang,Lijun Han,Qingbin Meng,Yuhao Jin,Weisheng Zhao

DOI: https://doi.org/10.1007/s10064-019-01629-5

IF: 4.2

2019-11-07

Bulletin of Engineering Geology and the Environment

Abstract:Mudstones of Bayanhua Formation are characterized by high porosity, large content of swelling clay minerals, and weak cementation due to its late diagenesis in Wujianfang Basin, eastern Inner Mongolia, China. Mechanical properties heavily deteriorate during water absorption or dehydration, resulting in underground engineering instability. To study water absorption/dehydration and mechanical response for weakly cemented mudstones, two sets of weathering routes, namely, higher relative humidity (RHs) and lower RHs, are performed by using a self-developed weathering instrument, which can achieve environmental control and real-time weight measurement. The water migration is logged by nuclear magnetic resonance (NMR). Finally, uniaxial compression tests are carried out on weathered samples to study their mechanical properties. The results show that dehydration occurs even under the 70% RH condition, due to their higher initial water content of more than 10%, and the dehydration content is exponential over time under the 60% RH condition. Variations of T2 spectrum reflect the water migration when the surrounding humidity changes. The maximum peak of the transverse relaxation time (T2) moves left during dehydration and shifts to the right when adsorbing water. The uniaxial compressive strength (UCS) does not increase with the decreasing RH at any time, which is distinct from elasticity modulus (E). There is a critical RH at 50%, indicating that damages accumulate when the RH is lower than 50%. Tensile fracture occurs for the most types of weathered samples, and shear failure only occurs under the drying condition.

engineering, environmental,geosciences, multidisciplinary, geological
Shear strength of unsaturated expansive soil during wetting-drying cycles

XU Dan,TANG Chaosheng,LENG Ting,LI Yunsheng,ZHANG Yan,WANG Kan,SHI Bin

DOI: https://doi.org/10.13745/j.esf.yx.2016-11-62

2018-01-01

Earth Science Frontiers

Abstract:Expansive soil is highly sensitive to climate change.Understanding the response of engineering properties of expansive soil under wetting drying cycles is therefore significant for revealing the disaster mechanism as natural expansive soil is subjected to periodic evaporation and infiltration.In this investigation,a series of shear tests were conducted on unsaturated remolded expansive soil which was subjected to three wetting-drying cycles.The influence of drying process,normal stress and wetting-drying cycles on shear strength behavior were analyzed and discussed.The results show that (1) during drying,specimen stiffness,shear strength,shear strength parameters (cohesion and internal friction angle),failure brittleness and peak strength loss increase with decreasing water content,while the shear displacement decreases accordingly;(2) higher normal stress gives rise to higher shear strength as well as residual shear strength,but lower peak strength loses,and fracture toughness of the specimen increases generally with increasing normal stress applied during shearing;(3) the shear strength behavior of unsaturated expansive soil is significantly influenced by wetting-drying cycles,during which both shear strength and cohesion increase first and then decrease,and reach their peak values at the second drying path;however,the internal friction angle is slightly influenced by wetting-drying cycles;(4) after the specimens were subjected to multiple wetting-drying cycles,the shear characteristics are similar to that of over consolidated soil,and the specimen presents more brittleness at failure;(5) the residual shear strength seems to be independent of drying process and wetting-drying cycles as the obtained values are generally kept around 100 kPa;and (6) shear strength of unsaturated expansive oil during wetting-drying cycles is significantly conditioned by suction,microstructurc and cracking development;it is necessary to combine unsaturated soil mechanics and soil science to make an accurate evaluation.
Experimental study on the deterioration of mechanical properties of sandy mudstone under different water-gas interactions

Ning Jiang,Dawei Yin,Xia Jiang,Zhiyou Gao,Shaorong Yang,Chuanbao Jia

DOI: https://doi.org/10.1016/j.heliyon.2024.e30667

IF: 3.776

2024-05-05

Heliyon

Abstract:Based on the water-rock-gas coupling test system, the work combined the scanning electron microscope and XTDIC 3D full-field strain measurement system. The Brazilian splitting test was performed on four groups of sandy mudstone specimens under contrast (CO), mash-gas soaking (MS), water-mash gas soaking (WM), and water-soaking (WS) conditions. The tensile strength, deformation failure, and microscopic characteristics of fractures were studied to reveal the deterioration mechanism of the tensile properties of sandy mudstone under water-gas coupling. The results showed that the uniaxial tensile strength of sandy mudstone specimens under the three soaking conditions was less than that of the contrast conditions. Compared with specimens in the CO group, the tensile strength of specimens in MS-WS groups was reduced; the WS group decreased the most. Specimens changed from brittle failure to plastic failure after soaking. The decrease rate in strength after the peak was consistent with the change trend in tensile strength. It led to a larger localized deformation zone of specimens and more obvious displacement. The deformation localization zone of the WS group was the broadest, with the most intense displacement. Besides, stress concentration first occurred in the submerged part of the WM group. Fractures expanded in the direction of maximum principal strain. The internal pore structure of sandy mudstone specimens in each group changed after soaking. The average porosity, maximum pore area, and probability entropy of specimens in WS-MS groups increased compared to the CO group. The WS group had the largest reduction and the MS group had the smallest. The pre-peak energy storage capacity of sandy mudstone specimens was gradually weakened. Compared with the CO group, that in the WS-MS groups was reduced. The WS group had the greatest reduction, and the MS group had the smallest. The deterioration effect of water on the interior of sandy mudstone was stronger than that of gas. The work is of great significance for understanding the stability of coal and rocks in closed-pit high-gas mines.
Study on Dynamic Characteristics of Unsaturated Strongly Weathered Sericite Schist Residual Soil

Nie Guang-ying,Xia Yu,Zhang Qing-wen

DOI: https://doi.org/10.1088/1755-1315/647/1/012103

2021-01-01

IOP Conference Series: Earth and Environmental Science

Abstract:Abstract Sericite schist residual soils are widely distributed on the shallow surface of western Yunnan, and most of them are in an unsaturated state. In order to study its dynamic characteristics, a resonance column tester was used to target the strongly weathered unsaturated sericite schist residuals in the Dali Railway. The soil carries out dynamic characteristic test to study. The results show that the confining pressure has a great influence on the dynamic characteristics of the specimen, the dynamic shear modulus increases with the increase of the confining pressure, the phenomenon that the damping ratio decreases with the increase of shear strain is more obvious. Using the Hardin-Drnevich model can better fit the dynamic shear modulus with shear strain. The application of the improved linear equation can better describe the relationship and analyse its mechanism.
Volume Changes and Mechanical Properties of Expansive Mudstone below Canals under Wet-Dry/Wet-Dry-Freeze-Thaw Cycles

Rui Zhu,Ying-hao Huang,Zhu Song,Feng Zhou

DOI: https://doi.org/10.1155/2021/3791692

IF: 1.843

2021-06-05

Advances in Civil Engineering

Abstract:The complex environment in northern China is the main reason for degradation of expansive mudstone below the canals, which resulted in instability and damage of canal slopes. In this study, a serial of laboratory tests was conducted to explore the volume changes and mechanical behaviors of expansive mudstone below the canals in Xinjiang. The experimental program includes wet-dry (WD) and wet-dry-freeze-thaw (WDFT) tests, volume measurement, and unconfined compression tests. The test results show that during the WD cycles, the volume changes of expansive mudstones with a higher dry range would be more significant. The freeze-thaw process in the WDFT cycles resulted in a decrease of volume change ranges when the expansive mudstones had a relatively smaller dry range and a slight increase of volume change ranges when the expansive mudstones had a relatively larger dry range. In the meantime, the stress-strain relationships of expansive mudstones with different dry ranges all presented strain softening under the cycles of WD or WDFT. The first cycle resulted in a significant decrease of failure strength. After seven WD/WDFT cycles, the failure strength of expansive mudstones with different dry ranges decreased by 37.2%∼59.1%. In addition, the freeze-thaw process in the WDFT cycles promoted the softening of the stress-strain relationships and aggravated the failure strength attenuation of expansive mudstones. Through this study, we expect to provide a preliminary basis for the construction and maintenance of expansive mudstone canals in Xinjiang.

construction & building technology,engineering, civil

The colonization of cartilage and ligaments by Trypanosoma cruzi.

Study on Mechanical Properties of Deep Expansive Soil and Coupling Damage Model of Freeze–Thaw Action and Loading

Analysis of mechanical properties and deterioration mechanisms of mudstone under wetting-drying cycles

Shear strength model of unsaturated frozen soil based on soil freezing characteristic and soil water characteristic

Experimental research on long-term dynamic characteristics of unsaturated road base and subbase mixtures

Study on the effect of water on the shear behavior and microstructure of red mudstone

Effect of Temperature on the Strength Characteristics of Unsaturated Silty Clay in Seasonal Frozen Region

Experimental and Numerical Simulation Study on the Influence of Gaseous Water on the Mechanical Properties of Red-Layer Mudstone in Central Sichuan

Study on dynamic mechanical response characteristics and fracture energy dissipation mechanism of sandstones with different saturations under real-time low temperature

Study on time-effect to the strength deterioration of carbonaceous mudstone under water-rock interaction

Mechanical Properties and Deterioration Mechanism of Remolded Carbonaceous Mudstone Exposed to Wetting–Drying Cycles

Mechanical properties and damage constitutive model of silty mudstone under heating and water-cooling cycles

Study on the Influence of Temperature and Water Content on the Static Mechanical Properties of Sandstone

Influences of Bedding Angle and Soaking Time on the Mechanical Behaviour of Silty Mudstone: Laboratory Testing and Theoretical Modelling

Shear Mechanical and Permeability Properties of Deep Rock Mass under Thermal-Hydraulic-Mechanical Coupling

Effects of Moisture and Stone Content on the Shear Strength Characteristics of Soil-Rock Mixture

Water absorption/dehydration by NMR and mechanical response for weakly cemented mudstones subjected to different humidity conditions

Shear strength of unsaturated expansive soil during wetting-drying cycles

Experimental study on the deterioration of mechanical properties of sandy mudstone under different water-gas interactions

Study on Dynamic Characteristics of Unsaturated Strongly Weathered Sericite Schist Residual Soil

Volume Changes and Mechanical Properties of Expansive Mudstone below Canals under Wet-Dry/Wet-Dry-Freeze-Thaw Cycles