The middle scalene muscle and its contribution to the thoracic outlet syndrome.

G. I. Thomas,T. W. Jones,L. Stavney,D. R. Manhas

DOI: https://doi.org/10.1016/0002-9610(83)90098-3

1983-05-01

Abstract:

What problem does this paper attempt to address?

Plasmon-Driven Hot Electron Transfer at Atomically Sharp Metal-Semiconductor Nanojunctions

Masiar Sistani,Maximilian G. Bartmann,Nicholas A. Güsken,Rupert F. Oulton,Hamid Keshmiri,Minh Anh Luong,Zahra Sadre-Momtaz,Martien I. den Hertog,Alois Lugstein

DOI: https://doi.org/10.1021/acsphotonics.0c00557

2020-06-15

Abstract:Recent advances in guiding and localizing light at the nanoscale exposed the enormous potential of ultra-scaled plasmonic devices. In this context, the decay of surface plasmons to hot carriers triggers a variety of applications in boosting the efficiency of energy-harvesting, photo-catalysis and photo-detection. However, a detailed understanding of plasmonic hot carrier generation and particularly the transfer at metal-semiconductor interfaces is still elusive. In this paper, we introduce a monolithic metal-semiconductor (Al-Ge) heterostructure device, providing a platform to examine surface plasmon decay and hot electron transfer at an atomically sharp Schottky nanojunction. The gated metal-semiconductor heterojunction device features electrostatic control of the Schottky barrier height at the Al-Ge interface, enabling hot electron filtering. The ability of momentum matching and to control the energy distribution of plasmon-driven hot electron injection is demonstrated by controlling the interband electron transfer in Ge leading to negative differential resistance.

Applied Physics,Mesoscale and Nanoscale Physics
Effect of chronic treatment with tricyclic antidepressant drugs on identified brain noradrenergic and serotonergic neurons.

T. Svensson

Abstract:
Simultaneous harnessing of hot electrons and hot holes achieved via n-metal-p Janus plasmonic heteronanocrystals

Xiaodong Wan,Yuying Gao,Mesfin Eshete,Min Hu,Rongrong Pan,Hongzhi Wang,Lizhen Liu,Jia Liu,Jun Jiang,Sergio Brovelli,Jiatao Zhang

DOI: https://doi.org/10.1016/j.nanoen.2022.107217

IF: 17.6

2022-07-01

Nano Energy

Abstract:Plasmonic hybrid nanostructures have opened up avenues for developing new classes of energy conversion materials toward photocatalysis, photovoltaics, and photodetectors. At the core of these applications is how to engineer the interface between the plasmonic/non-plasmonic (typically semiconductor) components, and control the flow and extraction of energetic charge carries within the hybrid system. Despite important advancements on single carrier extraction, the construction of plasmonic nanostructures that can simultaneously harness hot electrons and hot holes has eluded the nascent field. This is because the realization of such nanostructures is extremely challenging, owing to the difficulty in controlled arrangement of disparate materials that can respectively extract hot electrons and holes into one nano-object. Here we present a new dimension for exploitation of plasmonic hot carriers through creating binary energy flow channels across the plasmonic/semiconductor interfaces. This is based on fabrication of the n-type-metal-p-type (n-M-p) heteronanocrystals that consist of plasmonic metal (Au nanorod) adjoined with both n-type (CdS) and p-type (PbS) semiconductors in a core-Janus-shell configuration. Otherwise intractable due to large lattice mismatches, the resulting n-M-p heteronanocrystals display atomically organized interfaces at M-n, M-p and p-n junctions and show suitable interfacial energy barriers. Direct imaging via spatial-resolved surface photovoltage microscopy under NIR light irradiation reveals that the CdS and PbS semiconductor domains can separately collect hot electrons and holes generated from the excitation of plasmons in Au nanorod. This results in extended lifetime of the charge-separated state, and rationalizes the superior performance of n-M-p heteronanocrystals in photocatalytic CO2 reduction even at λ > 700 nm.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Plasmonic hot carrier dynamics in solid-state and chemical systems for energy conversion

Prineha Narang,Ravishankar Sundararaman,Harry A. Atwater

DOI: https://doi.org/10.1515/nanoph-2016-0007

IF: 7.5

2016-06-01

Nanophotonics

Abstract:Abstract Surface plasmons provide a pathway to efficiently absorb and confine light in metallic nanostructures, thereby bridging photonics to the nano scale. The decay of surface plasmons generates energetic ‘hot’ carriers, which can drive chemical reactions or be injected into semiconductors for nano-scale photochemical or photovoltaic energy conversion. Novel plasmonic hot carrier devices and architectures continue to be demonstrated, but the complexity of the underlying processes make a complete microscopic understanding of all the mechanisms and design considerations for such devices extremely challenging.Here,we review the theoretical and computational efforts to understand and model plasmonic hot carrier devices.We split the problem into three steps: hot carrier generation, transport and collection, and review theoretical approaches with the appropriate level of detail for each step along with their predictions.We identify the key advances necessary to complete the microscopic mechanistic picture and facilitate the design of the next generation of devices and materials for plasmonic energy conversion.

optics,physics, applied,materials science, multidisciplinary,nanoscience & nanotechnology
Interfacial Hot Carrier Collection Controls Plasmonic Chemistry

Fatemeh Kiani,Alan R. Bowman,Milad Sabzehparvar,Can O.Karaman,Ravishankar Sundararaman,Giulia Tagliabue

DOI: https://doi.org/10.1021/acsenergylett.3c01505

2023-07-18

Abstract:Harnessing non-equilibrium hot carriers from plasmonic metal nanostructures constitutes a vibrant research field. It promises to enable control of activity and selectivity of photochemical reactions, especially for solar fuel generation. However, a comprehensive understanding of the interplay of plasmonic hot carrier-driven processes in metal/semiconducting heterostructures has remained elusive. In this work, we reveal the complex interdependence between plasmon excitation, hot carrier generation, transport and interfacial collection in plasmonic photocatalytic devices, uniquely determining the charge injection efficiencies at the solid/solid and solid/liquid interfaces. Interestingly, by measuring the internal quantum efficiency of ultrathin (14 to 33 nm) single-crystalline plasmonic gold (Au) nanoantenna arrays on titanium dioxide substrates, we find that the performance of the device is governed by hot hole collection at the metal/electrolyte interface. In particular, by combining a solid- and liquid-state experimental approach with ab initio simulations, we show a more efficient collection of high-energy d-band holes traveling in [111] orientation, resulting in a stronger oxidation reaction at the {111} surfaces of the nanoantenna. These results thus establish new guidelines for the design and optimization of plasmonic photocatalytic systems and optoelectronic devices.

Chemical Physics,Mesoscale and Nanoscale Physics
Surface Plasmon-Induced Hot Carriers: Generation, Detection, and Applications.

Kyoungjae Song,Yujin Park,Jeong Y Park,Hyunhwa Lee

DOI: https://doi.org/10.1021/acs.accounts.2c00623

IF: 24.466

2022-12-06

Accounts of Chemical Research

Abstract:ConspectusDuring surface plasmon-mediated light-matter interactions, external energies on plasmonic metal nanostructures undergo energy dissipation via elastic e-e scattering, radiative luminescence, and nonradiative processes such as thermal relaxation (phonon) and electronic excitation (electron-hole pairs). In this process, surface plasmon decays dominantly through nonradiative recombination when the metal is smaller than 25 nm, forming hot carriers, including hot electrons and hot holes, with high kinetic energy of 1-3 eV. Although the ultrafast dynamics of hot carriers are on time scales ranging from femtoseconds to picoseconds, these fast-disappearing hot carriers can be collected as the steady-state photocurrent or chemicurrent by adopting the metal-semiconductor (M-S)-based platform for detecting hot carrier flow. Plasmonic hot carriers, especially as they convert to an electrochemical signal, are a promising topic, and their energy conversion mechanisms are being actively studied in the fields of renewable energy, optoelectronics, and photocatalysis. Recent studies have demonstrated that these hot carriers can both improve the performance of solar energy conversion and control the catalytic activity or selectivity by directly participating in the photoelectrochemical (PEC) reaction.In this Account, we describe the inherent relationship between hot carriers and surface plasmon as well as what role hot carriers play throughout the catalytic reaction. The recent experimental work and the theoretical analysis of in situ hot carrier generation on Au nanostructures were conducted with photoconductive atomic force microscopy and finite-difference time-domain (FDTD) simulations, respectively. We highlight the recent nanoscale visualization of hot carrier flow occurring through light-matter interactions and that the localized surface plasmon field surrounding the Au nanostructure leads to boosted hot carrier generation. In addition, we highlight the recent demonstration that plasmonic hot carriers prolong the lifetime of photoexcited carriers in the MAPbI3/Au/TiO2 hybrid nanodiode by the synergistic effect between plasmonic Au and perovskites. From this work, the solar-to-electron conversion performance of this nanodiode significantly increases due to the amplification of light absorption, which helps to design hybrid platforms for efficient hot carrier photovoltaics. We discuss the application of surface plasmon-driven hot electron generation, including hot electron-based photovoltaic devices and photocatalysts. We highlight the recent photoelectrochemical measurements on the Au/p-GaN heterostructures that are controlled by participating plasmonic hot carriers in the water splitting reaction. Furthermore, controlling the flow of both hot electrons and holes by developing hybrid platform configurations for hot carrier applications has promising opportunities for regulating the catalytic activities of hot carrier-based photocatalysis and improving the photoconversion efficiency of hot carrier-based optoelectronic devices.

Medicine,Physics,Materials Science
Metal@semiconductor Core-Shell Nanocrystals with Atomically Organized Interfaces for Efficient Hot Electron-Mediated Photocatalysis

Jia Liu,Jingwen Feng,Jing Gui,Tao Chen,Meng Xu,Hongzhi Wang,Huifang Dong,Hailong Chen,Xiaowei Li,Liang Wang,Zhuo Chen,Zhenzhong Yang,Jiajia Liu,Weichang Hao,Yuan Yao,Lin Gu,Yuxiang Weng,Yu Huang,Xiangfeng Duan,Jiatao Zhang,Yadong Li

DOI: https://doi.org/10.1016/j.nanoen.2018.02.040

IF: 17.6

2018-01-01

Nano Energy

Abstract:Judicious interfacial-, crystalline-and structural-engineering of plasmonic metal-semiconductor nanocomposites is key to harnessing their plasmonic functions for enhancing solar energy conversion. In this work, metal@semiconductor core-shell nanocrystals with atomically organized interface, quasi-monocrystalline shell and diverse controllable structures/morphologies, which are hardly tractable by conventional synthetic strategies, are accessed by developing an aqueous cation exchange method. The combined studies including Mid-IR femtosecond transient absorption spectroscopy measurements show that the superior metal-semiconductor interface attained by the presented method can greatly promote the extraction of hot electrons from metal to semiconductor (the quantum yield of hot electron injection was estimated at similar to 48%) in comparison with the nanostructures bearing unoptimized interfaces. Thus produced metal@semiconductor nanocrystals give 2-3 orders of magnitude enhancement in photocatalytic H-2 evolution activity relative to their counterparts accessed by conventional methods.
Hot-carrier Generation in Plasmonic SiO2-Au Core-Shell Nanoparticles

Jorge U. Salmon-Gamboa,Pan Wang,Mazhar E. Nasir,Anatoly V. Zayats

DOI: https://doi.org/10.1109/cleoe-eqec.2017.8086652

2017-01-01

Abstract:After the innovative method reported by Fujishima and Honda for hydrogen generation by the UV-light-induced electrochemical water splitting on TiO 2 electrodes [1], many other approaches were developed using hot-carrier generation by light in various semiconductors and metallic nanostructures [2-4]. For example, as an alternative to electrochemical cell systems, semiconductor particles suspended in water became a new field of study [2], where photocatalysis takes place on the surface of the particles. Hydrogen evolution from plasmonic metal-semiconductor heterostructures has also been observed with Au nanorods partially coated with TiO 2 which provide separated Au/TiO 2 regions [3]. In this case, hot electrons are generated in the plasmonic Au nanorods upon light illumination and subsequently some of them filtered out through the Au/TiO 2 Schottky barrier into TiO 2 and become available for photoreduction.
Cu2O@Au-CsPbI3 heterostructures for plasmon hot carrier transfer enhanced optoelectronics

Xinhong Zhao,Jixiang Dong,Yongchu Fang,Jinyu Dai,Jiahuan Chen,Xiaoxian Song,Zhendong Fu,Wenbao Sun,Quan Wang,Zaoxue Yan

DOI: https://doi.org/10.1016/j.jallcom.2024.173644

IF: 6.2

2024-04-01

Journal of Alloys and Compounds

Abstract:Plasmon hot carrier devices have tremendous potential applications in broadband photovoltaics, photodetection, photocatalysis, and intelligent optoelectronics, as they have the ability to generate hot carriers with energy lower than the optical bandgap at Schottky junctions and broaden the spectral range. However, this is mostly challenged by the lack of effective methods for the separation, migration, and extraction of plasmon hot carrier. In this work, a Cu2O@Au-CsPbI3 heterostructure was fabricated using facile low-temperature solution synthesis and spin-coating technique. The proposed heterostructure benefits from the simultaneous transfer of plasmon hot holes to Cu2O and hot electrons to CsPbI3, as well as enhanced charge separation driven by the built-in electric field at the p-n heterojunction interface. The heterostructure realizes remarkably enhanced light absorption, reduces carrier recombination, and further improves conversion efficiency. It exhibits a wide spectrum response of ultraviolet-visible-near infrared and achieves enhanced photodetection performance. The results suggest that Cu2O@Au-CsPbI3 heterostructure is a promising candidate for optoelectronic devices based on the harvesting of plasmonic hot carriers.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Plasmonic Hot-Carrier Extraction: Mechanisms of Electron Emission

Charlene Ng,Peng Zeng,Julian A. Lloyd,Debadi Chakraborty,Ann Roberts,Trevor A. Smith,Udo Bach,John E. Sader,Timothy J. Davis,Daniel E. Gómez

DOI: https://doi.org/10.48550/arXiv.1711.07095

2017-11-20

Abstract:When plasmonic nanoparticles are coupled with semiconductors, highly energetic hot carriers can be extracted from the metal-semiconductor interface for various applications in light energy conversion. Hot charge-carrier extraction upon plasmon decay using such an interface has been argued to occur after the formation of an intermediate electron population with a uniform momentum distribution. The efficiency of the charge separation process is thus discussed to be limited by this spatial homogeneity in certain plasmon-induced applications. Here we demonstrate using visible pump, near-infrared probe transient absorption spectroscopy that increases in the contact area between metal and semiconductor leads to an increase in the quantum yield for hot electron injection that is inconsistent with the homogeneous energy-momentum distribution of hot-electrons. Instead, further analysis of the experimental data suggests that the highly energetic electrons are emitted across the interface via a surface charge emission mechanism that occurs via a plasmon excitation

Chemical Physics
Hot Electrons in Electrically Driven Plasmonic Nanorod Metamaterials (conference Presentation)

Pan Wang,Alexey V. Krasavin,Mazhar E. Nasir,Wayne Dickson,Anatoly V. Zayats

DOI: https://doi.org/10.1117/12.2306693

2018-01-01

Abstract:Nonequilibrium hot carriers formed near the interfaces of semiconductors or metals play a crucial role in chemical catalysis and optoelectronic processes. In addition to excitation by optical illumination, such hot carriers can also be generated due to electron tunnelling, a quantum-mechanical effect which allows the transport of electrons across a nanoscale junction between two conducting electrodes. Here we study electron tunnelling effects in electrically-driven plasmonic nanorod metamaterials containing up to 10^11 tunnel junctions per square centimeters and show that the generation of hot electrons makes the tunnel junctions highly reactive, facilitating strongly confined chemical reactions which can in turn modulate the tunnelling processes. To form nanometer scale gaps for electron tunneling, an overgrown plasmonic nanorod metamaterial (Au nanorod assembly electrochemically grown in a substrate-supported, thin-film porous aluminum oxide template) was first ion-milled at an oblique angle (75º with respect to the normal to the sample surface) to make the embedded Au nanorods ~1 nm shorter than surrounding aluminum oxide. Then, a droplet of eutectic gallium and indium (EGaIn) was added onto the sample surface working as an upper electrode, forming millions of ~1-nm air gaps between the Au nanorod tips and the EGaIn. When a low voltage (2.5 V) was applied between the Au nanorods and the EGaIn, a strong light emission was observed from the substrate side (~ 4 mm2 in size) due to the radiative decay of plasmonic modes excited in the nanorod metamaterial by inelastic tunnelling electrons. With an increasing applied bias, the intensity of emission increases gradually, and is accompanied by a blue-shift of the cutoff wavelength (the energies of the emitted photons are always less than the energy of tunnelling electrons). Apart from the excitation of plasmons and photons by the inelastic tunnelling electrons, hot electrons are generated simultaneously in the tips of Au nanorods by the elastic tunnelling electrons while leaving hot holes in the EGaIn. The large flux of energetic hot electrons makes the otherwise inert tunnel junctions highly reactive, facilitating the oxidation and reduction reactions in the junctions involving O2 and H2 molecules, respectively. These reactions are monitored either optically by changes in the intensity of light emission (~50%) resulting from the radiative decay of tunnelling-generated surface plasmons, or electrically via tunnelling current variations (~10%). Electrically-driven plasmonic nanorod metamaterial with reactive tunnel junctions comprises a fertile platform merging photonics, electronics and chemistry at the nanoscale, opening up opportunities for developing electron tunnelling-based devices, such as sensors, light sources, nanoreactors, modulators and photodetectors.
Long-lived modulation of plasmonic absorption by ballistic thermal injection

John A. Tomko,Evan L. Runnerstrom,Yi-Siang Wang,Weibin Chu,Joshua R. Nolen,David H. Olson,Kyle P. Kelley,Angela Cleri,Josh Nordlander,Joshua D. Caldwell,Oleg V. Prezhdo,Jon-Paul Maria,Patrick E. Hopkins

DOI: https://doi.org/10.1038/s41565-020-00794-z

IF: 38.3

2020-11-09

Nature Nanotechnology

Abstract:Light–matter interactions that induce charge and energy transfer across interfaces form the foundation for photocatalysis<a href="/articles/s41565-020-00794-z#ref-CR1">1</a>,<a href="/articles/s41565-020-00794-z#ref-CR2">2</a>, energy harvesting<a href="/articles/s41565-020-00794-z#ref-CR3">3</a> and photodetection<a href="/articles/s41565-020-00794-z#ref-CR4">4</a>, among other technologies. One of the most common mechanisms associated with these processes relies on carrier injection. However, the exact role of the energy transport associated with this hot-electron injection remains unclear. Plasmon-assisted photocatalytic efficiencies can improve when intermediate insulation layers are used to inhibit the charge transfer<a href="/articles/s41565-020-00794-z#ref-CR5">5</a>,<a href="/articles/s41565-020-00794-z#ref-CR6">6</a> or when off-resonance excitations are employed<a href="/articles/s41565-020-00794-z#ref-CR7">7</a>, which suggests that additional energy transport and thermal effects could play an explicit role even if the charge transfer is inhibited<a href="/articles/s41565-020-00794-z#ref-CR8">8</a>. This provides an additional interfacial mechanism for the catalytic and plasmonic enhancement at interfaces that moves beyond the traditionally assumed physical charge injection<a href="#ref-CR9">9</a>,<a href="#ref-CR10">10</a>,<a href="#ref-CR11">11</a>,<a href="/articles/s41565-020-00794-z#ref-CR12">12</a>. In this work, we report on a series of ultrafast plasmonic measurements that provide a direct measure of electronic distributions, both spatially and temporally, after the optical excitation of a metal/semiconductor heterostructure. We explicitly demonstrate that in cases of strong non-equilibrium, a novel energy transduction mechanism arises at the metal/semiconductor interface. We find that hot electrons in the metal contact transfer their energy to pre-existing free electrons in the semiconductor, without an equivalent spatiotemporal transfer of charge. Further, we demonstrate that this ballistic thermal injection mechanism can be utilized as a unique means to modulate plasmonic interactions. These experimental results are well-supported by both rigorous multilayer optical modelling and first-principle ab initio calculations.

materials science, multidisciplinary,nanoscience & nanotechnology
Geometry and Polarization Effects in Designing Metallic-Semiconductor Nanostructures for Plasmonic Hot Carrier Collection

Asma M. Elsharif

DOI: https://doi.org/10.1007/s11468-020-01196-6

IF: 2.726

2020-06-02

Plasmonics

Abstract:Hot carrier collection assisted with surface plasmon integrated with metallic-semiconductor nanostructures directs a way for direct photoelectric conversion, which could be utilized for a photochemical reaction or photovoltaic energy conversion. Modeling plasmon-assisted thermal carrier generation, transport, and injection across the Schottky barrier helps us to acknowledge design considerations for these devices. Here, the effects of the nanostructure's geometry and light polarization on hot electron collection are emphasized by analyzing a simple structure of rectangular gold nanorod and a sophisticated 2D Au/TiO2 nanocavity arrays designed by our group. The high electric field intensity inside the metallic nanostructure at the plasmon frequency enhances the hot electron generation shown here. The momentum distribution of hot electrons is determined by the nanostructure's geometry and light polarization, which mostly affects collection efficiency. The structural and optical design is known to elevate the internal electric field from ordinary to the metal-semiconductor pathway that assists in producing hot carriers that accumulate adequate motion through the Schottky barrier, which further increases the effectiveness of the device.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
Quantifying the role of surface plasmon excitation and hot carrier transport in plasmonic devices

Giulia Tagliabue,Adam S. Jermyn,Ravishankar Sundararaman,Alex J. Welch,Joseph S. DuChene,Ragip Pala,Artur R. Davoyan,Prineha Narang,Harry A. Atwater

DOI: https://doi.org/10.1038/s41467-018-05968-x

IF: 16.6

2018-08-23

Nature Communications

Abstract:Harnessing photoexcited “hot” carriers in metallic nanostructures could define a new phase of non-equilibrium optoelectronics for photodetection and photocatalysis. Surface plasmons are considered pivotal for enabling efficient operation of hot carrier devices. Clarifying the fundamental role of plasmon excitation is therefore critical for exploiting their full potential. Here, we measure the internal quantum efficiency in photoexcited gold (Au)–gallium nitride (GaN) Schottky diodes to elucidate and quantify the distinct roles of surface plasmon excitation, hot carrier transport, and carrier injection in device performance. We show that plasmon excitation does not influence the electronic processes occurring within the hot carrier device. Instead, the metal band structure and carrier transport processes dictate the observed hot carrier photocurrent distribution. The excellent agreement with parameter-free calculations indicates that photoexcited electrons generated in ultra-thin Au nanostructures impinge ballistically on the Au–GaN interface, suggesting the possibility for hot carrier collection without substantial energy losses via thermalization.

multidisciplinary sciences
Decoupling Plasmonic Hot Carrier from Thermal Catalysis via Electrode Engineering

Pandiaraj Sekar,Robert Bericat-Vadell,Yeersen Patehebieke,Peter Broqvist,Carl-Johan Wallentin,Mikaela Görlin,Jacinto Sá

DOI: https://doi.org/10.1021/acs.nanolett.4c01803

2024-07-17

Abstract:Increased attention has been directed toward generating nonequilibrium hot carriers resulting from the decay of collective electronic oscillations on metal known as surface plasmons. Despite numerous experimental endeavors, demonstrating hot carrier-mediated photocatalysis without a heating contribution has proven challenging, particularly for single electron transfer reactions where the thermal contribution is generally detrimental. An innovative engineering solution is proposed to enable single electron transfer reactions with plasmonics. It consists of a photoelectrode designed as an energy filter and photocatalysis performed with light function modulation instead of continuously. The photoelectrode, consisting of FTO/TiO2 amorphous (10 nm)/Au nanoparticles, with TiO2 acting as a step-shape energy filter to enhance hot electron extraction and charge-separated state lifetime. The extracted hot electrons were directed toward the counter electrode, while the hot holes performed a single electron transfer oxidation reaction. Light modulation prevented local heat accumulation, effectively decoupling hot carrier catalysis from the thermal contribution.
Plasmon-induced hot-electron generation at nanoparticle/metal-oxide interfaces for photovoltaic and photocatalytic devices

César Clavero

DOI: https://doi.org/10.1038/nphoton.2013.238

IF: 35

2014-01-30

Nature Photonics

Abstract:Finding higher efficiency schemes for electron–hole separation is of paramount importance for realizing more efficient conversion of solar energy in photovoltaic and photocatalytic devices. Plasmonic energy conversion has been proposed as a promising alternative to conventional electron–hole separation in semiconductor devices. This emerging method is based on the generation of hot electrons in plasmonic nanostructures through electromagnetic decay of surface plasmons. Here, the fundamentals of hot-electron generation, injection and regeneration are reviewed, with special attention paid to recent progress towards photovoltaic devices. This new energy-conversion method potentially offers high conversion efficiencies, while keeping fabrication costs low. However, several considerations regarding the materials, architectures and fabrication methods used need to be carefully evaluated to advance this field.

optics,physics, applied
Hot Electron-Driven Photocatalysis Using Sub-5 nm Gap Plasmonic Nanofinger Arrays

Yunxiang Wang,Buyun Chen,Deming Meng,Boxiang Song,Zerui Liu,Pan Hu,Hao Yang,Tse-Hsien Ou,Fanxin Liu,Halton Pi,Irene Pi,Isleen Pi,Wei Wu

DOI: https://doi.org/10.3390/nano12213730

IF: 5.3

2022-10-24

Nanomaterials

Abstract:Semiconductor photocatalysis has received increasing attention because of its potential to address problems related to the energy crisis and environmental issues. However, conventional semiconductor photocatalysts, such as TiO2 and ZnO, can only be activated by ultraviolet light due to their wide band gap. To extend the light absorption into the visible range, the localized surface plasmon resonance (LSPR) effect of noble metal nanoparticles (NPs) has been widely used. Noble metal NPs can couple incident visible light energy to strong LSPR, and the nonradiative decay of LSPR generates nonthermal hot carriers that can be injected into adjacent semiconductor material to enhance its photocatalytic activity. Here we demonstrate that nanoimprint-defined gap plasmonic nanofinger arrays can function as visible light-driven plasmonic photocatalysts. The sub-5 nm gaps between pairs of collapsed nanofingers can support ultra-strong plasmon resonance and thus boost the population of hot carriers. The semiconductor material is exactly placed at the hot spots, providing an efficient pathway for hot carrier injection from plasmonic metal to catalytic materials. This nanostructure thus exhibits high plasmon-enhanced photocatalytic activity under visible light. The hot carrier injection mechanism of this platform was systematically investigated. The plasmonic enhancement factor was calculated using the finite-difference time-domain (FDTD) method and was consistent with the measured improvement of the photocatalytic activity. This platform, benefiting from the precise controllable geometry, provides a deeper understanding of the mechanism of plasmonic photocatalysis.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Regulation of the erythropoietin gene: evidence that the oxygen sensor is a heme protein.

M. Goldberg,Dunn Sp,H. Bunn

DOI: https://doi.org/10.1126/SCIENCE.2849206

IF: 56.9

1988-12-09

Science

Abstract:Erythropoietin (Epo), the hormone that stimulates red blood cell production, is synthesized in the kidney and liver in response to hypoxia. The human hepatoma cell line Hep3B regulates its production of Epo in a physiologic manner. Either hypoxia or cobalt chloride markedly increases expression of Epo mRNA as well as production of biologically active and immunologically distinct Epo protein. New protein synthesis is required before the induction of increased levels of hypoxia- or cobalt-induced Epo mRNA. Hypoxia, cobalt chloride, and nickel chloride appear to stimulate Epo production through a common pathway. The inhibition of Epo production at low partial pressures of oxygen by carbon monoxide provides evidence that a heme protein is integrally involved in the oxygen-sensing mechanism. This hypothesis is further supported by the finding that when heme synthesis is blocked, hypoxia-, cobalt-, and nickel-induced Epo production are all markedly inhibited. A model is proposed in which a ligand-dependent conformational change in a heme protein accounts for the mechanism by which hypoxia as well as cobalt and nickel stimulate the production of Epo.
Dynamic analysis of a novel 3-PSP 3-DOF parallel manipulator

Qi Hao,Liping Wang,Liwen Guan,Xinjun Liu

2009-06-22

Abstract:This paper addresses the dynamic modeling of a novel 3-PSP 3-DOF spatial parallel manipulator, which is used as a tool head for high speed machining of structural aircraft components. Hereby, the dynamic analysis of the manipulator is very important. Based on the kinematic analysis, the dynamic equation without considering parasitic motions is derived by using the Newton-Euler approach. Since the parasitic motions are a special characteristic of the 3-PSP parallel manipulator, the dynamic modeling considering them is also focused further. The numerical simulation shows that the parasitic motions of the moving platform could be ignored in the dynamic analysis.
Plasmonic Bound States in the Continuum Metasurface-Semiconductor-Metal Architecture Enables Efficient Hot-Electron-Based Photodetector

Zichen Wang,Jiacheng Sun,Chenbo Wu,Jiye Li,Lang Wang,Yuyu Zhang,Zishun Li,Xiaorui Zheng,Liaoyong Wen

DOI: https://doi.org/10.1021/acsami.4c03770

IF: 9.5

2024-06-15

ACS Applied Materials & Interfaces

Abstract:Plasmonic hot-electron-based photodetectors (HEB-PDs) have received widespread attention for their ability to realize effective carrier collection under sub-bandgap illumination. However, due to the low hot electron emission probability, most of the existing HEB-PDs exhibit poor responsivity, which significantly restricts their practical applications. Here, by employing the binary-pore anodic alumina oxide template technique, we proposed a compact plasmonic bound state in continuum...

materials science, multidisciplinary,nanoscience & nanotechnology

The middle scalene muscle and its contribution to the thoracic outlet syndrome.

Plasmon-Driven Hot Electron Transfer at Atomically Sharp Metal-Semiconductor Nanojunctions

Effect of chronic treatment with tricyclic antidepressant drugs on identified brain noradrenergic and serotonergic neurons.

Simultaneous harnessing of hot electrons and hot holes achieved via n-metal-p Janus plasmonic heteronanocrystals

Plasmonic hot carrier dynamics in solid-state and chemical systems for energy conversion

Interfacial Hot Carrier Collection Controls Plasmonic Chemistry

Surface Plasmon-Induced Hot Carriers: Generation, Detection, and Applications.

Metal@semiconductor Core-Shell Nanocrystals with Atomically Organized Interfaces for Efficient Hot Electron-Mediated Photocatalysis

Hot-carrier Generation in Plasmonic SiO2-Au Core-Shell Nanoparticles

Cu2O@Au-CsPbI3 heterostructures for plasmon hot carrier transfer enhanced optoelectronics

Plasmonic Hot-Carrier Extraction: Mechanisms of Electron Emission

Hot Electrons in Electrically Driven Plasmonic Nanorod Metamaterials (conference Presentation)

Long-lived modulation of plasmonic absorption by ballistic thermal injection

Geometry and Polarization Effects in Designing Metallic-Semiconductor Nanostructures for Plasmonic Hot Carrier Collection

Quantifying the role of surface plasmon excitation and hot carrier transport in plasmonic devices

Decoupling Plasmonic Hot Carrier from Thermal Catalysis via Electrode Engineering

Plasmon-induced hot-electron generation at nanoparticle/metal-oxide interfaces for photovoltaic and photocatalytic devices

Hot Electron-Driven Photocatalysis Using Sub-5 nm Gap Plasmonic Nanofinger Arrays

Regulation of the erythropoietin gene: evidence that the oxygen sensor is a heme protein.

Dynamic analysis of a novel 3-PSP 3-DOF parallel manipulator

Plasmonic Bound States in the Continuum Metasurface-Semiconductor-Metal Architecture Enables Efficient Hot-Electron-Based Photodetector