Factors that influence oral bioavailability; a cathepsin K inhibitor for human studies.

D. Veber

DOI: https://doi.org/10.1007/978-0-387-73657-0_263

Advances in experimental medicine and biology

Abstract:

What problem does this paper attempt to address?

On-line prediction of fresh pork quality using visible/near-infrared reflectance spectroscopy.

Yi-Tao Liao,Yu-Xia Fan,Fang Cheng

DOI: https://doi.org/10.1016/j.meatsci.2010.07.011

IF: 7.077

2010-01-01

Meat Science

Abstract:Visible/near-infrared (Vis/NIR) spectroscopy was tested to predict the quality attributes of fresh pork (content of intramuscular fat, protein and water, pH and shear force value) on-line. Vis/NIR spectra (350–1100nm) were obtained from 211 samples using a prototype. Partial least-squares regression (PLSR) models were developed by external validation with wavelet de-noising and several pre-processing methods. The 6th order Daubechies wavelet with 6 decomposition levels (db6–6) showed high de-noising ability with good information preservation. The first derivative of db6–6 de-noised spectra combined with multiplicative scatter correction yielded the prediction models with the highest coefficient of determination (R2) for all traits in both calibration and validation periods, which were all above 0.757 except for the prediction of shear force value. The results indicate that Vis/NIR spectroscopy is a promising technique to roughly predict the quality attributes of intact fresh pork on-line.
Feasibility Study Of Near Infrared Spectroscopy With Variable Selection For Non-Destructive Determination Of Quality Parameters In Shell-Intact Cottonseed

Zhuangrong Huang,Sha Sha,Zhengqin Rong,Jinhong Chen,Qiuling He,Daud M. Khan,Shuijin Zhu

DOI: https://doi.org/10.1016/j.indcrop.2012.08.015

IF: 6.449

2013-01-01

Industrial Crops and Products

Abstract:The potential of near infrared (NIR) spectroscopy for non-destructive determination of quality parameters including oil and protein contents in shell-intact cottonseed was investigated. Linear partial least squares (PLS) and nonlinear least-squares support vector machine (LS-SVM) methods were used to develop the calibration models to determinate the protein and oil contents. Moreover, as variable selection techniques, the Monte Carlo uninformative variable elimination (MC-UVE) and the successive projections algorithm (SPA) were applied to improve the predictive ability of the model. Finally, the MC-UVE-LS-SVM models show the best prediction performance. The coefficient of determination (R-2), residual predictive deviation (RPD) and root mean squares error of prediction (RMSEP) were 0.959, 4.871 and 0.977 for protein, and 0.950, 4.429 and 0.834 for oil, respectively. The results indicate that NIR technology could be very useful for the rapid quality analysis of shell-intact cottonseed avoiding the need of grinding. Furthermore, the variable selection of MC-UVE can provide more robust and accurate calibration models than SPA. (C) 2012 Elsevier B.V. All rights reserved.
Chemical Characterization and Temporal Variability of Pasta Condiment By-Products for Sustainable Waste Management

Lorenzo Strani,Giulia Farioli,Marina Cocchi,Caterina Durante,Alessandra Olarini,Samuele Pellacani

DOI: https://doi.org/10.3390/foods13183018

IF: 5.2

2024-09-23

Foods

Abstract:Sustainable waste management is an extremely important issue due to its environmental, economic, and social impacts. Knowledge of the chemical composition of the waste produced is a starting point for its valorization. This research focuses, for the first time, on the by-products of pasta condiment production, starting with their characterization. In particular, the presence of potential bioactive compounds and their variability over time have been studied. The latter aspect is crucial for the subsequent valorization of these by-products. In addition to acidity and total phenolic content, an untargeted strategy was adopted, using spectroscopic and chromatographic techniques coupled with chemometrics, to study waste samples coming from four single condiment production lines, i.e., Genoese pesto, tomato, ricotta, and ragù sauces. The presence of lycopene, polyphenols, and several valuable volatile compounds was highlighted. Their presence and relative amounts vary mainly according to the presence of tomatoes in the sauce. The results obtained at different storage times (after 0, 7, 10, and 15 days) showed that the samples studied, despite having similar chemical characteristics, underwent changes after one week of storage and then presented a relatively stable chemical profile. A general decrease is observed after 7 days for almost all the chemical variables monitored, so careful planning within the first days is required to obtain a high recovery.
A Feasibility Research on the Monitoring of Traditional Chinese Medicine Production Process Using NIR-based Multivariate Process Trajectories

Wenlong Li,Haifan Han,Zhiwei Cheng,Yan Zhang,Shaoyong Liu,Haibin Qu

DOI: https://doi.org/10.1016/j.snb.2016.03.023

IF: 9.221

2016-01-01

Sensors and Actuators B Chemical

Abstract:Traditional Chinese medicine (TCM) products are usually manufactured through batch processes. To improve the batch-to-batch reproducibility, practical approaches for the real-time monitoring of batch evolution need to be developed. In-line near-infrared (NIR) spectroscopy combined with multivariate statistical process control (MSPC) method, as an efficient process analytical technology, is presented for the real-time batch process monitoring. Two representative TCM technical processes, the alkaline precipitation of the compound E-Jiao oral liquid and the liquid preparation process of Tanreqing injection, were taken as examples. The NIR spectra collected in-line was "variable-wise" unfolded into two-dimensional matrix, and multi-way principal component analysis (MPCA) model were developed based on the rearranged data of the normal operation condition (NOC) batches. Three kinds of multivariate control charts (PC scores, Hotelling T-2 and DModX) were used to monitor the evolution of test batches with artificial batch variations, including the change of starting material quality attributes and abnormal operation conditions. As illustrated with test batches, the established model can identify NOC or AOC (abnormal operation condition) batches accurately, and detect different kinds of deviations from NOC batches using these control charts. The results indicated that the NIR-based multivariate process trajectories can reflect the batch-to-batch reproducibility effectively, and can also help for the diagnosis of the failure batches in the TCM production. (C) 2016 Elsevier B.V. All rights reserved.
Application of Near Infrared Spectroscopy Combined with Particle Swarm Optimization Based Least Square Support Vactor Machine to Rapid Quantitative Analysis of Corni Fructus

Xue-song Liu,Fen-fang Sun,Ye Jin,Yong-jiang Wu,Zhi-xin Gu,Li Zhu,Dong-lan Yan

DOI: https://doi.org/10.16438/j.0513-4870.2015.12.003

2015-01-01

Abstract:A novel method was developed for the rapid determination of multi-indicators in corni fructus by means of near infrared (NIR) spectroscopy. Particle swarm optimization (PSO) based least squares support vector machine was investigated to increase the levels of quality control. The calibration models of moisture, extractum, morroniside and loganin were established using the PSO-LS-SVM algorithm. The performance of PSO-LS-SVM models was compared with partial least squares regression (PLSR) and back propagation artificial neural network (BP-ANN). The calibration and validation results of PSO-LS-SVM were superior to both PLS and BP-ANN. For PSO-LS-SVM models, the correlation coefficients (r) of calibrations were all above 0.942. The optimal prediction results were also achieved by PSO-LS-SVM models with the RMSEP (root mean square error of prediction) and RSEP (relative standard errors of prediction) less than 1.176 and 15.5% respectively. The results suggest that PSO-LS-SVM algorithm has a good model performance and high prediction accuracy. NIR has a potential value for rapid determination of multi-indicators in Corni Fructus.
Application of visible/near infrared spectroscopy to quality control of fresh fruits and vegetables in large-scale mass distribution channels: a preliminary test on carrots and tomatoes

Roberto Beghi,Valentina Giovenzana,Alessio Tugnolo,Riccardo Guidetti

DOI: https://doi.org/10.1002/jsfa.8768

Abstract:Background: The market for fruits and vegetables is mainly controlled by the mass distribution channel (MDC). MDC buyers do not have useful instruments to rapidly evaluate the quality of the products. Decisions by the buyers are driven primarily by pricing strategies rather than product quality. Simple, rapid and easy-to-use methods for objectively evaluating the quality of postharvest products are needed. The present study aimed to use visible and near-infrared (vis/NIR) spectroscopy to estimate some qualitative parameters of two low-price products (carrots and tomatoes) of various brands, as well as evaluate the applicability of this technique for use in stores. Results: A non-destructive optical system (vis/NIR spectrophotometer with a reflection probe, spectral range 450-1650 nm) was tested. The differences in quality among carrots and tomatoes purchased from 13 stores on various dates were examined. The reference quality parameters (firmness, water content, soluble solids content, pH and colour) were correlated with the spectral readings. The models derived from the optical data gave positive results, in particular for the prediction of the soluble solids content and the colour, with better results for tomatoes than for carrots. Conclusion: The application of optical techniques may help MDC buyers to monitor the quality of postharvest products, leading to an effective optimization of the entire supply chain. © 2017 Society of Chemical Industry.
Near infrared spectroscopy in combination with chemometrics as a process analytical technology (PAT) tool for on-line quantitative monitoring of alcohol precipitation.

Ye Jin,Zengzeng Wu,Xuesong Liu,Yongjiang Wu

DOI: https://doi.org/10.1016/j.jpba.2013.01.012

IF: 3.571

2013-01-01

Journal of Pharmaceutical and Biomedical Analysis

Abstract:The application of near infrared (NIR) spectroscopy for on-line quantitative monitoring of alcohol precipitation of the Danhong injection was investigated. For the NIR measurements, two fiber optic probes designed to transmit NIR radiation through a 2mm path length flow cell were applied to collect spectra in real-time. Particle swarm optimization- (PSO-) based least square support vector machines (LS-SVM) and partial least squares (PLS) models were developed for quantitative analysis of the critical intermediate quality attributes: the soluble solid content (SSC) and concentrations of danshensu (DSS), protocatechuic aldehyde (PA), hydroxysafflor yellow A (HSYA) and salvianolic acid B (SAB). The optimal models were then used for on-line quantitative monitoring of alcohol precipitation. The results showed that the PSO-based LS-SVM with a radial basis function (RBF) kernel was slightly better than the conventional PLS method, even though both methods exhibited satisfactory fitting results and predictive abilities. In this study, successful models were built and applied on-line; these models proffer real-time data and instant feedback about alcohol precipitation.
Near-Infrared Spectroscopy and Chemometrics for Effective Online Quality Monitoring and Process Control during Pelagic Fishmeal and Oil Processing

María Gudjónsdóttir,Gudrún Svana Hilmarsdóttir,Ólafur Ögmundarson,Sigurjón Arason

DOI: https://doi.org/10.3390/foods13081186

IF: 5.2

2024-04-14

Foods

Abstract:Near-infrared spectroscopy has become a common quality assessment tool for fishmeal products during the last two decades. However, to date it has not been used for active online quality monitoring during fishmeal processing. Our aim was to investigate whether NIR spectroscopy, in combination with multivariate chemometrics, could actively predict the changes in the main chemical quality parameters of pelagic fishmeal and oil during processing, with an emphasis on lipid quality changes. Results indicated that partial least square regression (PLSR) models from the NIR data effectively predicted proximate composition changes during processing (with coefficients of determination of an independent test set at RCV2 = 0.9938, RMSECV = 2.41 for water; RCV2 = 0.9773, RMSECV = 3.94 for lipids; and RCV2 = 0.9356, RMSECV = 5.58 for FFDM) and were successful in distinguishing between fatty acids according to their level of saturation (SFA (RCV2=0.9928, RMSECV=0.24), MUFA (RCV2=0.8291, RMSECV=1.49), PUFA (RCV2=0.8588, RMSECV=2.11)). This technique also allowed the prediction of phospholipids (PL RCV2=0.8617, RMSECV=0.11, and DHA (RCV2=0.8785, RMSECV=0.89) and EPA content RCV2=0.8689, RMSECV=0.62) throughout processing. NIR spectroscopy in combination with chemometrics is, thus, a powerful quality assessment tool that can be applied for active online quality monitoring and processing control during fishmeal and oil processing.

food science & technology
Monitoring batch-to-batch reproducibility of liquid-liquid extraction process using in-line near-infrared spectroscopy combined with multivariate analysis.

Haoshu Xiong,Xingchu Gong,Haibin Qu

DOI: https://doi.org/10.1016/j.jpba.2012.06.028

IF: 3.571

2012-01-01

Journal of Pharmaceutical and Biomedical Analysis

Abstract:Traditional Chinese medicine (TCM) products are usually manufactured through batch processes. To improve batch-to-batch reproducibility, the feasible approaches for real-time monitoring of batch evolution need to be developed. In-line near-infrared (NIR) spectroscopy combined with multivariate data analysis as an efficient process analytical technology (PAT) tool, is presented in this study for real-time batch process monitoring. Liquid–liquid extraction is a widely used purification technology in the TCM manufacture, and selected as the example to demonstrate the effectiveness of this PAT tool. Multi-way partial least squares (MPLS) model was developed based on in-line measured NIR spectral data of ten normal operation condition (NOC) batches. Three kinds of multivariate control charts (scores, Hotelling T2 and DModX) were used to monitor the evolution of six test batches with artificial batch variations, including the change of starting material quality attributes and abnormal operation conditions. The approach was found very effective for real-time monitoring of process deviations from NOC batches. It is an alternative promising tool for monitoring batch reproducibility of the unit operations during the manufacture of TCM.
An Affordable NIR Spectroscopic System for Fraud Detection in Olive Oil

Melendreras,Soldado,Costa-Fernández,López,Valledor,Campo,Ferrero

DOI: https://doi.org/10.3390/s23031728

IF: 3.9

2023-02-04

Sensors

Abstract:Adulterations of olive oil are performed by adding seed oils to this high-quality product, which are cheaper than olive oils. Food safety controls have been established by the European Union to avoid these episodes. Most of these methodologies require expensive equipment, time-consuming procedures, and expert personnel to execute. Near-infrared spectroscopy (NIRS) technology has many applications in the food processing industry. It analyzes food safety and quality parameters along the food chain. Using principal component analysis (PCA), the differences and similarities between olive oil and seed oils (sesame, sunflower, and flax oil) have been evaluated. To quantify the percentage of adulterated seed oil in olive oils, partial least squares (PLS) have been employed. A total of 96 samples of olive oil adulterated with seed oils were prepared. These samples were used to build a spectra library covering various mixtures containing seed oils and olive oil contents. Eighteen chemometric models were developed by combining the first and second derivatives with Standard Normal Variable (SNV) for scatter correction to classify and quantify seed oil adulteration and percentage. The results obtained for all seed oils show excellent coefficients of determination for calibration higher than 0.80. Because the instrumental aspects are not generally sufficiently addressed in the articles, we include a specific section on some key aspects of developing a high-performance and cost-effective NIR spectroscopy solution for fraud detection in olive oil. First, spectroscopy architectures are introduced, especially the Texas Instruments Digital Light Processing (DLP) technology for spectroscopy that has been used in this work. These results demonstrate that the portable prototype can be used as an effective tool to detect food fraud in liquid samples.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
A Feasibility Study on the Non-Invasive Analysis of Bottled Compound E Jiao Oral Liquid Using Near Infrared Spectroscopy

Wenlong Li,Haifan Han,Lu Zhang,Yan Zhang,Haibin Qu

DOI: https://doi.org/10.1016/j.snb.2015.01.073

2015-01-01

Abstract:The aim of this study was to explore the feasibility of near infrared (NIR) spectroscopy for the quantitative analysis of Compound E Jiao oral liquid, a popular oral TCM preparation, through intact glass vials. Transmission spectra were acquired with a sample holder tailored to the instrument's sample compartment. Total flavonoids, total saponins and soluble solid contents were considered as quality indicators of this oral preparation and calibration models were built using partial least-squares regression (PLSR) algorithm. The sample set was comprised of production samples as well as laboratory samples prepared by a concentrating-diluting method so as to extend the concentration range beyond the production variation. The developed models gave root mean square error of prediction (RMSEP) of 0.084 mg mL(-1) for total flavonoids, 0.014 mg mL(-1) for total saponins and 0.21% for soluble solid contents. To better evaluate the prediction performance, an independent set of ten production samples was introduced for the external validation. The models are compared with those built with the transflectance spectra collected in the destructive way. The results of paired t-test and F-test at a significance level of 0.05 revealed that the two sets of models exhibited comparable model performance. The overall results demonstrate that the proposed non-destructive method can be used as an advantageous alternative in the quality inspection of Compound E Jiao oral liquid production. (C) 2015 Elsevier B.V. All rights reserved.
Fast and Reliable On-Site Quality Assessment of Essential Raw Brewing Materials Using MicroNIR and Chemometrics

Giuseppina Gullifa,Chiara Albertini,Elena Papa,Rita Petrucci,Paola Di Matteo,Martina Bortolami,Stefano Materazzi,Roberta Risoluti

DOI: https://doi.org/10.3390/foods13172728

IF: 5.2

2024-08-28

Foods

Abstract:The interest in the quality control of the raw materials, intermediates, and final products, as well as production methods, of beer has increased significantly in recent decades due to the needs and expectations of consumers. Increasing in the industrialization and globalization of beer supply chains led to a need for novel analytical tools suitable for the rapid and reliable characterization of the materials involved. In this study, an ultracompact instrument operating in the NIR region of the spectrum, microNIR, was tested for the chemical investigation of barley malts. The essential raw materials for brewing require careful control since they deeply affect the characteristic flavor and taste of the final products. Therefore, a robust prediction model able to classify base and specialty barley malts was developed starting from NIR measurements. Soft Independent Class Analogy (SIMCA) was selected as the chemometric technique for the optimization of two prediction models, and ground and sieved materials were investigated using spectroscopy. The microNIR/chemometric approach proposed in this study permitted the correct prediction of the malt samples included in the external validation set, providing false positive and false negative rates no higher than 3.41% and 0.25%, respectively, and confirming the feasibility of the novel analytical platform.
Adrenocortical metabolism and plasma corticosterone in soman intoxicated rabbits

J. Doebler,E. W. Wickersham,Ľ. Polakovič,T. Shih,A. Anthony

DOI: https://doi.org/10.1007/BF01951700

1985-09-15

Experientia

Abstract:
Near-Infrared Spectroscopy and Geostatistical Analysis for Modeling Spatial Distribution of Analytical Constituents in Bulk Animal By-Product Protein Meals

José A. Adame-Siles,Tom Fearn,José E. Guerrero-Ginel,Ana Garrido-Varo,Francisco Maroto-Molina,Dolores Pérez-Marín

DOI: https://doi.org/10.1177/0003702816683958

2016-12-22

Applied Spectroscopy

Abstract:Control and inspection operations within the context of safety and quality assessment of bulk foods and feeds are not only of particular importance, they are also demanding challenges, given the complexity of food/feed production systems and the variability of product properties. Existing methodologies have a variety of limitations, such as high costs of implementation per sample or shortcomings in early detection of potential threats for human/animal health or quality deviations. Therefore, new proposals are required for the analysis of raw materials in situ in a more efficient and cost-effective manner. For this purpose, a pilot laboratory study was performed on a set of bulk lots of animal by-product protein meals to introduce and test an approach based on near-infrared (NIR) spectroscopy and geostatistical analysis. Spectral data, provided by a fiber optic probe connected to a Fourier transform (FT) NIR spectrometer, were used to predict moisture and crude protein content at each sampling point. Variographic analysis was carried out for spatial structure characterization, while ordinary Kriging achieved continuous maps for those parameters. The results indicated that the methodology could be a first approximation to an approach that, properly complemented with the Theory of Sampling and supported by experimental validation in real-life conditions, would enhance efficiency and the decision-making process regarding safety and adulteration issues.

spectroscopy,instruments & instrumentation
Application of the Non-Destructive NIR Technique for the Evaluation of Strawberry Fruits Quality Parameters

Manuela Mancini,Luca Mazzoni,Francesco Gagliardi,Francesca Balducci,Daniele Duca,Giuseppe Toscano,Bruno Mezzetti,Franco Capocasa

DOI: https://doi.org/10.3390/foods9040441

IF: 5.2

2020-04-06

Foods

Abstract:The determination of strawberry fruit quality through the traditional destructive lab techniques has some limitations related to the amplitude of the samples, the timing and the applicability along all phases of the supply chain. The aim of this study was to determine the main qualitative characteristics through traditional lab destructive techniques and Near Infrared Spectroscopy (NIR) in fruits of five strawberry genotypes. Principal Component Analysis (PCA) was applied to search for spectral differences among all the collected samples. A Partial Least Squares regression (PLS) technique was computed in order to predict the quality parameters of interest. The PLS model for the soluble solids content prediction was the best performing—in fact, it is a robust and reliable model and the validation values suggested possibilities for its use in quality applications. A suitable PLS model is also obtained for the firmness prediction—the validation values tend to worsen slightly but can still be accepted in screening applications. NIR spectroscopy represents an important alternative to destructive techniques, using the infrared region of the electromagnetic spectrum to investigate in a non-destructive way the chemical–physical properties of the samples, finding remarkable applications in the agro-food market.

food science & technology
A Multiblock Approach to Fuse Process and Near-Infrared Sensors for On-Line Prediction of Polymer Properties

Lorenzo Strani,Raffaele Vitale,Daniele Tanzilli,Francesco Bonacini,Andrea Perolo,Erik Mantovani,Angelo Ferrando,Marina Cocchi

DOI: https://doi.org/10.3390/s22041436

IF: 3.9

2022-02-13

Sensors

Abstract:Petrochemical companies aim at assessing final product quality in real time, in order to rapidly deal with possible plant faults and to reduce chemical wastes and staff effort resulting from the many laboratory analyses performed every day. In order to answer these needs, the main purpose of the current work is to explore the feasibility of multiblock regression methods to build real-time monitoring models for the prediction of two quality properties of Acrylonitrile-Butadiene-Styrene (ABS) by fusing near-infrared (NIR) and process sensors data. Data come from a production plant, which operates continuously, and where four NIR probes are installed on-line, in addition to standard process sensors. Multiblock-PLS (MB-PLS) and Response-Oriented Sequential Alternation (ROSA) methods were here utilized to assess which of such sensors and plant areas were the most relevant for the quality parameters prediction. Several prediction models were constructed exploiting measurements provided by sensors active at different ABS production process stages. Both methods provided good prediction performances and permitted identification of the most relevant data blocks for the quality parameters’ prediction. Moreover, models built without considering recordings from the final stage of the process yielded prediction errors comparable to those involving all available data blocks. Thus, in principle, allowing final ABS quality to be estimated in real-time before the end of the process itself.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Industrial Hydrogenation Process Monitoring Using Ultra-compact Near-Infrared Spectrometer and Chemometrics

Juliana Mendes Garcia Pereira,Jorge Leonardo Sanchez,Patricia Casarin de Lima,Gabriela Possebon,Augusto Tanamati,Ailey Aparecida Coelho Tanamati,Evandro Bona

DOI: https://doi.org/10.1007/s12161-017-0989-9

IF: 2.9

2017-07-11

Food Analytical Methods

Abstract:The hydrogenation process of soybean oil is monitored through time-consuming methodologies that demand sample preparation and produce chemical residues. Thus, it is necessary to develop faster low-cost waste-free instrumentation methodologies. The aim of this work was to evaluate an ultra-compact near-infrared spectrometer in tandem with the partial least squares regression (PLSR) or support vector regression (SVR) in the control of the hydrogenation process. Models were used to predict the saturated fatty acids (SFA), unsaturated fatty acids (UFA), monounsaturated fatty acids (MUFA), trans fatty acids (TFA), polyunsaturated fatty acids (PUFA), and the iodine value (IV). The values predicted by the PLSR and SVR models were compared to the experimental values obtained by gas chromatography. A methodology for feature selection was also assessed, which was able to reduce by up to 85% the variables used in the models without loss of performance. The values obtained for root mean square error of cross validation, root mean square error of calibration, root mean square error of prediction, and r2 remained very close for both PLSR and SVR. Regarding RSD, all values were above 5% for the PLSR models, whereas for the SVR, the RSD presented values lower than 5% for IV and UFA. It is worth noting that the spectrometer used has low cost, effortless assembly, and easy handling, which allows its use in any environment. Through the results obtained, it was demonstrated that the ultra-compact NIRS spectrometer in tandem with PLSR or SVR represent an alternative to monitor the industrial hydrogenation process of soybean oil.

food science & technology
Respiratory Syncytial Virus Infection: Rapid Diagnosis in Children by Use of Indirect Immunofluorescence

A. Kaul,R. Scott,M. Gallagher,M. Scott,J. Clement,P. Ogra

DOI: https://doi.org/10.1001/ARCHPEDI.1978.02120360044006

1978-11-01

Abstract:Specimens of 387 nasopharyngeal suction smears obtained from 354 children hospitalized with acute respiratory infections during an eight-month period were examined for the presence of respiratory syncytial (RS) virus by the indirect immunofluorescence antibody technique (IFAT) and by conventional tissue culture infectivity techniques. Respiratory syncytial virus was identified in nasopharyngeal suction smear specimens from 123 of these specimens (32%) with the use of both techniques. Of the specimens positive on tissue culture 92% were also positive for RS virus by IFAT. However, eight specimens positive for RS virus by tissue culture were negative by IFAT, although three of the specimens were technically unsuitable. Six percent of the specimens negative for RS virus by tissue culture were positive for RS virus antigen when tested by IFAT. Using IFAT, identification of RS virus could be accomplished within four to six hours, whereas isolation by tissue culture took an average period of ten days. These data suggest that IFAT is a reliable means for the rapid diagnosis of RS virus infection in infants and children.
A Pilot Survey on Hygienic-Sanitary Characteristics of Ready-To-Eat Sauces and Pesto

Giuseppina Caggiano,Giusy Diella,Paolo Trerotoli,Marco Lopuzzo,Francesco Triggiano,Massimo Ricci,Vincenzo Marcotrigiano,Maria Teresa Montagna,Osvalda De Giglio

DOI: https://doi.org/10.3390/ijerph17145005

2020-07-12

Abstract:In recent years, the chaotic habits of modern life have favored the consumption of quickly prepared meals, using ready-to-eat (RTE) foods and condiments. The aim of this study was to establish the microbiological safety of RTE sauces and pesto from markets analyzed at different stages of shelf life. In the bacterial investigation, all samples were shown to be acceptable, although differences were observed concerning shelf life times. On the other hand, the fungal investigation showed frequent positive results, with concentrations higher than threshold values. Detected microbial diffusion was the lowest when products were far from the expiry date and had just been opened, while high microbial proliferation was observed when analyzing the same package after 48 h, higher than for a product close to the end of its shelf life. This study highlights the discreet microbiological quality of processed and RTE foods, underlining the importance of hygienic-sanitary surveillance of these foods to their shelf life. Consequently, it is necessary to: (1) implement a food control plan for all food categories to carry out risk analysis associated with their consumption; and (2) better adapt the regulations relating to microbiological analysis, and understand the biological significance of each microbial parameter throughout the shelf life of foods.
Raman spectroscopy and multivariate analysis for the waste and edible vegetable oil classification

Matteo Poddighe,Alberto Mannu,Giacomo Luigi Petretto,Giorgio Pintore,Sebastiano Garroni,Luca Malfatti

DOI: https://doi.org/10.1080/14786419.2024.2409395

2024-10-13

Natural Product Research

Abstract:Twelve samples of waste cooking oil (WCO) were prepared by four different deep-frying procedures. The edible and the waste oil samples were characterised by Raman spectroscopy, revealing few and almost negligible differences between them. Therefore, the possibility of classifying the different groups of samples by extracting valuable data from the Raman spectra through statistical multivariate analysis was explored. Even if the number of samples was not enough to draw definitive conclusions, unsupervised principal component analysis (PCA) and supervised partial least square discriminant analysis (PLS-DA) conducted on the raw Raman signals, allowed to distinguish within edible and waste vegetable oil, and to select the most relevant combination of variables associated with each family. Using sparse partial least square discriminant analysis (S-PLS-DA), we determined a chemical fingerprint characteristic of each sample by creating a Variable In Projection (VIP) plot. The methodology herein presented could find relevant application in the detection of waste adulteration in vegetable oils sold for industrial purposes other than food.

chemistry, medicinal, applied

Factors that influence oral bioavailability; a cathepsin K inhibitor for human studies.

On-line prediction of fresh pork quality using visible/near-infrared reflectance spectroscopy.

Feasibility Study Of Near Infrared Spectroscopy With Variable Selection For Non-Destructive Determination Of Quality Parameters In Shell-Intact Cottonseed

Chemical Characterization and Temporal Variability of Pasta Condiment By-Products for Sustainable Waste Management

A Feasibility Research on the Monitoring of Traditional Chinese Medicine Production Process Using NIR-based Multivariate Process Trajectories

Application of Near Infrared Spectroscopy Combined with Particle Swarm Optimization Based Least Square Support Vactor Machine to Rapid Quantitative Analysis of Corni Fructus

Application of visible/near infrared spectroscopy to quality control of fresh fruits and vegetables in large-scale mass distribution channels: a preliminary test on carrots and tomatoes

Near infrared spectroscopy in combination with chemometrics as a process analytical technology (PAT) tool for on-line quantitative monitoring of alcohol precipitation.

Near-Infrared Spectroscopy and Chemometrics for Effective Online Quality Monitoring and Process Control during Pelagic Fishmeal and Oil Processing

Monitoring batch-to-batch reproducibility of liquid-liquid extraction process using in-line near-infrared spectroscopy combined with multivariate analysis.

An Affordable NIR Spectroscopic System for Fraud Detection in Olive Oil

A Feasibility Study on the Non-Invasive Analysis of Bottled Compound E Jiao Oral Liquid Using Near Infrared Spectroscopy

Fast and Reliable On-Site Quality Assessment of Essential Raw Brewing Materials Using MicroNIR and Chemometrics

Adrenocortical metabolism and plasma corticosterone in soman intoxicated rabbits

Near-Infrared Spectroscopy and Geostatistical Analysis for Modeling Spatial Distribution of Analytical Constituents in Bulk Animal By-Product Protein Meals

Application of the Non-Destructive NIR Technique for the Evaluation of Strawberry Fruits Quality Parameters

A Multiblock Approach to Fuse Process and Near-Infrared Sensors for On-Line Prediction of Polymer Properties

Industrial Hydrogenation Process Monitoring Using Ultra-compact Near-Infrared Spectrometer and Chemometrics

Respiratory Syncytial Virus Infection: Rapid Diagnosis in Children by Use of Indirect Immunofluorescence

A Pilot Survey on Hygienic-Sanitary Characteristics of Ready-To-Eat Sauces and Pesto

Raman spectroscopy and multivariate analysis for the waste and edible vegetable oil classification