Abstract:Microsupercapacitors (MSCs) are attractive energy devices for applications in IoT, wireless sensors, and other microelectronic systems due to their small footprints. In this work, the dimensional scaling of fully-integrated additively-fabricated MSCs is systematically investigated. The dimensions of the MSCs are scaled by varying the length and cross-section of their electrodes to study their scalability to the mm 3 range, making them attractive for even chip-scale embedding. MSCs with the thickest electrodes demonstrate the highest values of capacitance and energy density, while MSCs with the thinnest electrodes show lower capacitance and energy densities, but deliver higher power densities. We observe that as expected, capacitance scales with dimensions. We observe excellent performance levels, including maximum areal capacitance of ∼731.7 mF cm −2 , areal energy density of ∼36.59 μW h cm −2 , areal power density of ∼2669.8 mW cm −2 , and ∼95% capacitance retention after 17 000 cycles. These MSCs also show maximum volumetric capacitance, volumetric energy density, and volumetric power density of 8.7 F cm −3 , 0.436 mW h cm −3 , and 31.78 W cm −3 , respectively. Overall, these are the highest values reported to date for such systems. These results are achieved by utilizing novel chemistries for the components of the MSCs and from tuning their geometry. The electrodes of the MSCs are formed from a nanocomposite of edge-oxidized graphite oxide (EOGO)/cerium oxide nanoparticles to benefit from both electrical double-layer capacitance (EDLC) and pseudocapacitance, the electrolyte is a UV-curable hydrogel based on (poly(ethylene glycol) diacrylate (PEGDA) + LiCl + lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) + water), and the current collector is a silver paste. These MSCs are fully packaged and sealed by 3D printing a package using polycaprolactone (PCL) and depositing a UV-curable resin-based encapsulant. Our findings demonstrate that such devices can be scaled to mm 3 volumes while continuing to deliver excellent performance, making them attractive candidates for a range of embedded energy storage applications.

Editable 3D Micro-Supercapacitor with High Energy Density Based on Mortise-Tenon Joint Structures

Silicon-nanoforest-based solvent-free micro-supercapacitors with ultrahigh spatial resolution <i>via</i> IC-compatible <i>in situ</i> fabrication for on-chip energy storage

Three-Dimensional Micro/Nano-interconnected Scaffold Graphene-Based Micro-Supercapacitors with High Electrochemical Performance

Tuning the Mechanical and Electrical Properties of Porous Electrodes for Architecting 3D Microsupercapacitors with Batteries‐Level Energy

Laser-Assisted Multiscale Fabrication of Configuration-Editable Supercapacitors with High Energy Density

Advanced Three-Dimensional Microelectrode Architecture Design for High-Performance On-Chip Micro-Supercapacitors

Freestanding Micro-Supercapacitor with Interdigital Electrodes for Low-Power Electronic Systems

High-energy-density, All-Solid-state Microsupercapacitors with Three-Dimensional Interdigital Electrodes of Carbon/polymer Electrolyte Composite

Sub-mm3 dimensional scaling of fully-integrated additively-fabricated microsupercapacitors for embedded energy storage applications

A Laser-Processed Carbon-Titanium Carbide Heterostructure Electrode for High-Frequency Micro-Supercapacitors

Three dimensional high-performance micro-supercapacitors with switchable high power density and high energy density

Ordered porous and uniform electric-field-strength micro-supercapacitors by 3D printing based on liquid-crystal V2O5 nanowires compositing carbon nanomaterials

3D printing of high-performance micro-supercapacitors with patterned exfoliated graphene/carbon nanotube/silver nanowire electrodes

Nitrogen and Oxygen Co-Doped Graphene Quantum Dots with High Capacitance Performance for Micro-Supercapacitors

A High Energy Density 2D Microsupercapacitor Based on an Interconnected Network of a Horizontally Aligned Carbon Nanotube Sheet

Laser-Directed Energy Deposition to Achieve High-Aspect-Ratio Micropillar Arrays for 3D Interdigitated Microsupercapacitors

3D Wearable Fabric‐Based Micro‐Supercapacitors with Ultra‐High Areal Capacitance

High Areal Energy 3D‐Interdigitated Micro‐Supercapacitors in Aqueous and Ionic Liquid Electrolytes

Freestanding Solid-State Micro-Supercapacitor Based on Laser-Patterned Nanofibers

Aqueous high-voltage all 3D-printed micro-supercapacitors with ultrahigh areal capacitance and energy density

A MXENE BASED ALL-SOLID-STATE MICROSUPERCAPACITOR WITH 3D INTERDIGITAL ELECTRODE