Abstract:<p>Masks have become one of the most indispensable pieces of personal protective equipment and are important strategic products during the coronavirus disease 2019 (COVID-19) pandemic. Due to the huge mask demand–supply gap all over the world, the development of user-friendly technologies and methods is urgently needed to effectively extend the service time of masks. In this article, we report a very simple approach for the decontamination of masks for multiple reuse during the COVID-19 pandemic. Used masks were soaked in hot water at a temperature greater than 56 °C for 30 min, based on a recommended method to kill COVID-19 virus by the National Health Commission of the People's Republic of China. The masks were then dried using an ordinary household hair dryer to recharge the masks with electrostatic charge to recover their filtration function (the so-called "hot water decontamination + charge regeneration" method). Three kinds of typical masks (disposable medical masks, surgical masks, and KN95-grade masks) were treated and tested. The filtration efficiencies of the regenerated masks were almost maintained and met the requirements of the respective standards. These findings should have important implications for the reuse of polypropylene masks during the COVID-19 pandemic. The performance evolution of masks during human wear was further studied, and a company (Zhejiang Runtu Co., Ltd.) applied this method to enable their workers to extend the use of masks. Mask use at the company was reduced from one mask per day per person to one mask every three days per person, and 122 500 masks were saved during the period from 20 February to 30 March 2020. Furthermore, a new method for detection of faulty masks based on the penetrant inspection of fluorescent nanoparticles was established, which may provide scientific guidance and technical methods for the future development of reusable masks, structural optimization, and the formulation of comprehensive performance evaluation standards.</p>

Recycling of Anti-COVID-19 Filtering Facepiece Respirators for Use as Preliminary Water Filters

Development of a rapid plasma decontamination system for decontamination and reuse of filtering facepiece respirators

Safety in the practice of decontaminating filtering facepiece respirators: A systematic review

Comparison of Two Methods for Sterilization of Filtering Facepiece Respirators Worn for Extended Periods During the COVID-19 Pandemic: An Experimental Laboratory Study

Decontamination of disposable respirators for reuse in a pandemic employing in-situ-generated peracetic acid

Synthesis of a Quaternary Ammonium-Halamine and Preparation on the Modified Nanofibrous Filter with Superior Sterilization, Air Filtration, and Biodegradability

Exploring Reusability of Disposable Face Masks: Effects of Disinfection Methods on Filtration Efficiency, Breathability, and Fluid Resistance

Can Masks Be Reused After Hot Water Decontamination During the COVID-19 Pandemic?

Recycling of disposable single-use face masks to mitigate microfiber pollution

Recycling respirator masks to a high-value product: From COVID-19 prevention to highly efficient battery separator

Strategies for the reuse of N95 and N99 respiratory masks during the COVID-19 pandemic

Novel sustainable filter for virus filtration and inactivation

A Bio-Based Nanofibre Hydrogel Filter for Sustainable Water Purification

Filtration performances of non-medical materials as candidates for manufacturing facemasks and respirators

Biodegradable and Reusable Cellulose-Based Nanofiber Membrane Preparation for Mask Filter by Electrospinning

Fast and Deep Disinfection for Face Masks Recycle Using Vacuum Ultraviolet Irradiation

Ultraviolet germicidal irradiation of influenza-contaminated N95 filtering facepiece respirators

The Use of UVC Irradiation to Sterilize Filtering Facepiece Masks Limiting Airborne Cross-Infection

Disposal and resource utilization of waste masks: a review

Reusable Electrospun Nanofibrous Membranes with Antibacterial Activity for Air Filtration

Evaluating the efficiency of nanofiltration and reverse osmosis membrane processes for the removal of per- and polyfluoroalkyl substances from water: A critical review