Abstract:The activities aimed at reducing the safety hazard in lithium batteries have successfully considered the replacement of the conventional, volatile and flammable carbonate-based, liquid electrolytes with more stable polymer electrolytes, obtained in the form of free standing membranes. With respect to other solid polymer electrolytes, such as those based on poly(ethylene oxide), gelled polymer electrolytes (GPEs) have the great advantage of offering high conductivity, i.e. of the order of 10 −3 S cm −1 , over a wide temperature range, combined with a large electrochemical stability, i.e. extending up to 5V versus Li + /Li [1-3]. Poly(vinylidene fluoride) (PVdF)-based, gel-type membranes have been widely investigated as Li-conducting systems and prepared by conventional solvent-casting procedures [4] or electro-spinning techniques [5]. In this work we report on originally developed, PVdF-based GPEs obtained by in-situ formation of the gel matrix during cell assembly, followed by a lithium salt infiltration step [6]. Particular emphasis was devoted to the study and the optimization of the GPE composition. The substitution of the commonly used LiPF 6 salt with the fluorine free, bis(oxalato)borate (LiBOB) was investigated. A detailed thermal and dynamical mechanical characterization was adopted to elucidate the properties of the proposed systems over a wide temperature range. Vibrational spectroscopy revealed interesting molecular interactions among components, mainly. polymer and salt, strongly affecting the stability of the membranes. The electrochemical investigation confirmed high ionic conductivity, a controlled interfacial resistivity versus lithium metal and a good electrochemical stability window. The feasibility of the in-situ gelled, PVdF-based polymer electrolyte containing the LiBOB salt was demonstrated by successful galvanostatic cyclations of the quoted membrane in different lithium-ion cell configurations, obtained by coupling a Sn-C alloying anode with an high voltage spinel or a LiFePO 4 cathode. Acknowledgments The results of this work have been obtained by the financial support of the European Community within the Seventh Framework Programme APPLES (Advanced, High Performance, Polymer Lithium Batteries for Electrochemical Storage) Project (contract number 265644). References [1] F. Croce, G.B. Appetecchi, L. Persi, B. Scrosati, Nature 394 (1998) 456. [2] G.B. Appetecchi, P. Romagnoli, B. Scrosati, Electrochem. Commun. 3 (2001) 281. [3] J. Hassoun, S. Panero, P. Reale, B. Scrosati, Adv. Mater. 2 (2009) 4807. [4] J. Hassoun, P. Reale, Bruno Scrosati, J. Mater. Chem. 17 (2007) 3668. [5] F. Croce, M.L. Focarete, J. Hassoun, I. Meschinia, B. Scrosati, Energy Environ. Sci. 4 (2011) 921. [6] L. Lombardo, M. A. Navarra, S. Panero, L. Aguilera Medina, A. Matic, J. Hassoun, J. Power Sources, 245 (2014) 232.

Single-Ion Gel Polymer Electrolyte based on In-Situ UV Irradiation Cross-Linked Polyimide Complexed with PEO for Lithium-Ion Batteries

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Core-Shell Structured Gel Polymer Electrolyte with Single-Ion Conducting and Thermal Stability Bifunction for Lithium-Ion Batteries

Electrochemical Characteristics of Elastic, Non-Polar Polyurethane-Based Polymer Gel Electrolyte for Separator-Less Lithium-Ion Batteries

High-Performance and Highly Safe Solvate Ionic Liquid-Based Gel Polymer Electrolyte by Rapid UV-Curing for Lithium-Ion Batteries

In-situ crosslinked single ion gel polymer electrolyte with superior performances for lithium metal batteries

Diethylenetriaminepentaacetic Acid-based Conducting Solid Polymer Electrolytes Impede Lithium Dendrites and Impart Antioxidant Capacity in Lithium-Ion Batteries

Pyrrolidinium‐PEG Ionic Copolyester: Li‐Ion Accelerator in Polymer Network Solid‐State Electrolytes

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

In-Situ gelled Polymer Electrolytes for Advanced Lithium Ion Batteries

Conjugated Diketone-Linked Polyimide Cathode Material for Organic Lithium-Ion Batteries

In Situ Polymerization Of Methoxy Polyethylene Glycol (350) Monoacrylate And Polyethyleneglycol (200) Dimethacrylate Based Solid-State Polymer Electrolyte For Li-Ion Batteries

In-situ Crosslinked Gel Polymer Electrolytes Based on Ionic Monomers as Charge Carriers for Lithium-Ion Batteries

Poly(ionic liquid)@PEGMA Block Polymer Initiated Microphase Separation Architecture in Poly(ethylene oxide)-Based Solid-State Polymer Electrolyte for Flexible and Self-Healing Lithium Batteries

Deionized Water Pretreated Polyimide Nanofiber Membranes as Framework for Polymer Electrolytes Applied to Solid‐State Lithium Metal Batteries

Designing zwitterionic bottlebrush polymers to enable long‐cycling quasi‐solid‐state lithium metal batteries

Improving the Ionic Conductivity of PEGDMA-Based Polymer Electrolytes by Reducing the Interfacial Resistance for LIBs

Multiple enhancement effects of dipoles within polyimide cathode promoting highly efficient energy storage of lithium-ion battery

Semi‐Interpenetrating Polymer Electrolyte As a Coating Layer Constructed on Polyphenylene Sulfide Nonwoven to Afford Superior Stability and Performance for Lithium‐Ion Batteries

Semi-interpenetrating-network all-solid-state polymer electrolyte with liquid crystal constructing efficient ion transport channels for flexible solid lithium-metal batteries