Abstract:Background: Diisocyanates (isocyanates), including methylene diphenyl diisocyanate (MDI), are the primary reactive components of spray polyurethane foam (SPF) insulation. They are potent immune sensitizers and a leading cause of occupational asthma. Skin exposure to isocyanates may lead to both irritant and allergic contact dermatitis and possibly contribute to systemic sensitization. More than sufficient evidence exists to justify the use of protective garments to minimize skin contact with aerosolized and raw isocyanate containing materials during SPF applications. Studies evaluating the permeation of protective garments following exposure to SPF insulation do not currently exist.Objectives: To conduct permeation testing under controlled conditions to assess the effectiveness of common protective gloves and coveralls during SPF applications using realistic SPF product formulations.Methods: Five common disposable garment materials [disposable latex gloves (0.07 mm thickness), nitrile gloves (0.07 mm), vinyl gloves (0.07 mm), polypropylene coveralls (0.13 mm) and Tyvek coveralls (0.13 mm)] were selected for testing. These materials were cut into small pieces and assembled into a permeation test cell system and coated with a two-part slow-rise spray polyurethane foam insulation. Glass fiber filters (GFF) pretreated with 1-(9-anthracenylmethyl)piperazine) (MAP) were used underneath the garment to collect permeating isocyanates. GFF filters were collected at predetermined test intervals between 0.75 and 20.00 min and subsequently analyzed using liquid chromatography-tandem mass spectrometry. For each garment material, we assessed (i) the cumulative concentration of total isocyanate, including phenyl isocyanate and three MDI isomers, that effectively permeated the material over the test time; (ii) estimated breakthrough detection time, average permeation rate, and standardized breakthrough time; from which (iii) recommendations were developed for the use of similar protective garments following contamination by two-component spray polyurethane foam systems and the limitations of such protective garments were identified.Results: Each type of protective garment material demonstrated an average permeation rate well below the ASTM method F-739 standardized breakthrough rate threshold of 100.0 ng/cm2 min-1. Disposable latex gloves displayed the greatest total isocyanate permeation rate (4.11 ng/cm2 min-1), followed by the vinyl and nitrile gloves, respectively. The Tyvek coverall demonstrated a greater average rate of isocyanate permeation than the polypropylene coveralls. Typical isocyanate loading was in the range of 900 to 15,000 ng MDI/cm2.Conclusion: Permeation test data collected during this study indicated that each type of protective garment evaluated, provided a considerable level of protection (i.e. 10-110-fold reduction from the level of direct exposure) against the isocyanate component of the SPF insulation mixture. Nitrile gloves and polypropylene coveralls demonstrated the lowest rate of permeation and the lowest cumulative permeation of total isocyanate for each garment type.

Effects of impermeable and semipermeable glove materials on resolution of inflammation and epidermal barrier impairment after experimental skin irritation

Evaluation of comfort gloves made of semipermeable and textile materials in patients with hand dermatoses: Results of a controlled multicenter intervention study (ProTection II)

Comparison of skin calming effects of cosmetic products containing 4-t-butylcyclohexanol or acetyl dipeptide-1 cetyl ester on capsaicin-induced facial stinging in volunteers with sensitive skin

Testing for irritation with a multifactorial approach: comparison of eight non-invasive measuring techniques on five different irritation types

Testing the effectiveness of a polymeric membrane dressing in modulating the inflammation of intact, non-injured, mechanically irritated skin

Amputee skin condition: occlusion, stratum corneum hydration and free amino acid levels

Medical glove durability during exposure to different solvent agents: an ex-vivo experimental study

Permeability of gloves to selected chemotherapeutic agents after treatment with alcohol or isopropyl alcohol

Effectiveness of Semiocclusive Sodium Carboxymethyl Cellulose Fibers and Hydrocolloid Dressings for Irritant Peristomal Dermatitis: A Case Series

Testing of Disposable Protective Garments Against Isocyanate Permeation From Spray Polyurethane Foam Insulation

The effects of chlorination, thickness, and moisture on glove donning efficiency

Development of a cumulative irritation model for incontinence-associated dermatitis

Physiological and Molecular Effects of in vivo and ex vivo Mild Skin Barrier Disruption

Evaluation of disposable protective garments against epoxy resin permeation and penetration from anti-corrosion coatings

Enhancement of stratum corneum lipid structure improves skin barrier function and protects against irritation in adults with dry, eczema‐prone skin

Effects of ethylcellulose and 2-octyldodecanol additives on skin permeation and irritation with ethylene-vinyl acetate copolymer matrix patches containing formoterol fumarate

Comparison of Medical Tape Performance Using Skin Response Quantitative Measurements on Healthy Volunteers

Effects of eczema calming lotion on the stratum corneum in atopic dermatitis: Corneodesmosin and intercellular lipid lamellae

Skin physiology and textiles - consideration of basic interactions

Household laundry detergents disrupt barrier integrity and induce inflammation in mouse and human skin

In vitro characterisation of a novel rubber contact allergen in protective gloves