Abstract:The problem of low detection accuracy of driving displacement exists in the driving process of anchor digging robots. In order to solve the above problem, taking the supporting bolt as the positioning benchmark, by analyzing the distance relationship between the anchor digging robot and the supporting bolt, the positioning model of 'anchor digging robot-supported anchor' is established. This paper proposes a binocular vision-based displacement detection method for anchor digging robots. Due to the complexity of the underground coal mine environment, the disparity map obtained by using the traditional Census transform algorithm has limitations. By analyzing the binocular vision ranging principle, an improved Census transform algorithm is proposed to obtain the disparity map of the anchor and the depth information of the anchor image. This paper presents a method of anchor feature recognition and positioning, and uses edge detection algorithm to extract the anchor contour in disparity map. The minimum circumscribed rectangle and the maximum circumscribed rectangle algorithm are used to frame the anchor outline and extract the pixel coordinates of anchor feature points. By analyzing coordinate conversion relationships, the pixel coordinates of feature points are converted to world coordinates. By using the least square method, the spatial coordinates of feature points are fitted into a straight line. The plane parallel to the roadway section is established through the straight line. The distance between the binocular camera and the plane is calculated, and then the distance between the anchor digging robot and the plane is obtained. A mobile robot platform is set up to carry out the displacement detection experiment of the anchor digging robot. The results show the following points. The improved Census transform algorithm reduces the mismatch rate from 19.85% to 11.52%, which is 41.96% lower than the traditional Census transform algorithm. The method of anchor feature point recognition and positioning can effectively extract the spatial coordinates of anchor feature points. The distance between the camera and the three parallel sections is 3 010.428, 2 215.910, 1 415.127 mm respectively through straight line fitting. In the robot positioning experiment, the real calculated displacement is compared with the theoretical displacement. The results show that the real calculated displacement curve coincides with the theoretical displacement curve basically. The error between the theoretical displacement and the calculated displacement is less than 20 mm. The autonomous, accurate and real-time displacement detection of the anchor digging robot can be realized.

Omni-directional attitude detection of advanced hydraulic support relative to roadway based on visual measurement principle

Evaluation of Real-Time Perception of Deformation State of Host Rocks in Coal Mine Roadways in Dusty Environment

Development of a Monocular Vision System for Robotic Drilling.

A New Method for Measuring the Attitude and Straightness of Hydraulic Support Groups Based on Point Clouds

Position measurement technology of boom-type roadheader based on binocular vision

Hybrid Calibration and Detection Approach for Mobile Robotic Manufacturing Systems.

Relative Position and Posture Detection of Hydraulic Support Based on Particle Swarm Optimization

Binocular vision-based displacement detection method for anchor digging robot

Analysis of Position Measurement Accuracy of Boom-Type Roadheader Based on Binocular Vision

Improvement of position and posture measurement system for boom-type roadheader based on machine vision

Research on Positioning Method of Coal Mine Mining Equipment Based on Monocular Vision

Locating Anchor Drilling Holes Based on Binocular Vision in Coal Mine Roadways

High-Precision Positioning, Perception and Safe Navigation for Automated Heavy-duty Mining Trucks

Robust distance measurement using illumination map estimation and MAHNet in underground coal mines

Automatic Acquisition System for Mine Pressure Monitoring in Coal Mine Working-Face Footage

Visual Sensor Target Tracking and Localization Method for Automatic Excavators

Expected position and attitude adjustment control method of coal mine roadway support robot

Research on Body Positioning Measurement Method of Bolting Robot based on Vision Theory

Infrared LEDs-Based Pose Estimation with Underground Camera Model for Boom-Type Roadheader in Coal Mining.

Research on a Real-Time Monitoring Method for the Three-Dimensional Straightness of a Scraper Conveyor Based on Binocular Vision

A Detection and Tracking Method Based on Heterogeneous Multi-Sensor Fusion for Unmanned Mining Trucks