Automatic Acquisition System for Mine Pressure Monitoring in Coal Mine Working-Face Footage

Miaoer Zhou,Yongkui Shi,Jian Hao,Xin Chen
DOI: https://doi.org/10.1155/2024/8876210
IF: 2.336
2024-02-07
Journal of Sensors
Abstract:The existing mine pressure monitoring system has realized the online continuous monitoring of the working-face stent resistance, roadway roof offcuts, and anchor rod/rope working resistance. However, the mine pressure monitoring information of the working face currently includes only the stent resistance and the monitoring time, and there is no information on the working-face advance. The mine pressure data cannot be precisely analyzed due to a lack of measurement point locations. Mine pressure data analysis combined with the working-face feed information is the basis for safe and efficient mining and for improving the intelligence level of the comprehensive mining face. According to the special electromagnetic environment of the underground, this system adopts UWB (ultra-wide-band) technology and the SDS-TWR (symmetric double-sided two-way ranging) ranging method, with the UWB positioning base station as the core and installs positioning tags at the end supports of the working face to collect information. The data are uploaded to the host computer via Ethernet for coordinate solving, automatically collecting the working-face footage data and providing positional information for mine pressure monitoring. The application results show that the system operates normally and can collect real-time information of working-face footage and monitor mine pressure data, and meet the requirements of coal mine positioning accuracy, positioning error is less than 30 cm, the application effect is good.
engineering, electrical & electronic,instruments & instrumentation
What problem does this paper attempt to address?
The problem this paper attempts to address is the lack of location information in the monitoring of mine pressure in coal mine working faces. Specifically, although existing mine pressure monitoring systems have achieved online continuous monitoring of working face support resistance, roadway roof separation amount, and anchor/bolt working resistance, the current working face mine pressure monitoring information only includes support resistance and monitoring time, lacking information on the advancement of the working face. Due to the absence of location information of measurement points, mine pressure data cannot be accurately analyzed. Analyzing mine pressure data in conjunction with working face advancement information is the foundation for achieving safe and efficient mining and improving the intelligence level of fully mechanized mining faces. To improve the measurement accuracy of the "roof pressure step distance," it is necessary to determine the position of the working face and calculate the distance between the working face and the advancement based on mine pressure monitoring. Existing positioning technologies still have limitations in terms of cost and positioning accuracy. Therefore, the research proposes a working face automatic acquisition system based on Ultra-Wideband (UWB) technology and the SDS-TWR ranging method to achieve automatic acquisition of working face advancement data and provide location information for mine pressure monitoring. This system uses positioning tags installed on the end support of the working face, utilizes UWB base stations for real-time ranging, and uploads the data to the host computer for coordinate calculation, thereby achieving automatic acquisition of working face advancement data and dynamic monitoring of mine pressure data.