Abstract:This study conducted a simulative analysis of different hybrid perovskite solar cells with various hybrid electron transport layers (ETL) and hole transport layers (HTL). The electron transport layer boosts durability, lowers production costs, increases stability, improves light absorption, and increases efficiency. Hybrid ETLs are taken into consideration to improve the device's performance. The selected hybrid ETLs (PCBM–SnS 2 , TiO 2 –SnO 2 , and PCBM–PCPB) were modeled with four hybrid perovskite absorbers (CsPbI 3 , FAPbI 3 , MAPbI 3, and FAMAPbI 3 ) and five HTLs (PEDOT: PSS, CuI, Spiro-OMeTAD, CBTS, and NiO). Three sets of solar cells are found to be the most effective configurations after investigating over sixty different combinations of perovskite solar cell architectures. The structures show CBTS as the efficient HTL for FAMAPbI 3 with all three hybrid ETLs. Besides, a holistic analysis of the effect of several factors such as the defect density and thickness of the absorber layer, temperature, parasitic resistances, capacitance, Mott–Schottky, impedance, conduction band offset, and current density–voltage and quantum efficiency characteristics is performed. The results show a maximum power conversion efficiency of 25.57%, 26.35%, and 23.36% with PCBM–SnS 2 , TiO 2 –SnO 2 , and PCBM–PCPB respectively. Among the studied hybrid ETLs, perovskite solar cell associated with TiO 2 –SnO 2 has depicted a superior performance (Voc = 1.12 V, Jsc = 26.88 mA/cm 2 , FF = 87.27%). The efficiency of the perovskite solar cell using this study has been drastically enhanced compared to the previous experimental report. The proposed strategy provides a new avenue for attaining clean energy and allows researchers to pave the way for further design optimization to obtain high-performance solar cell devices.

Optimization of vertical gradient Pb-Sn hybrid perovskite solar cells using SCAPS (Solar Cell Capacitance Simulator)

High‐Performance Tin–Lead Mixed‐Perovskite Solar Cells with Vertical Compositional Gradient

SCAPS-1D Simulation and First-principles Calculation of CsSnCl3 Hole Transport Layer-Free Perovskite Solar Cells Based on Gradient Doping

Boosting efficiency up to 25% for HTL-free carbon-based perovskite solar cells by gradient doping using SCAPS simulation

SCAPS-1D Simulation for Device Optimization to Improve Efficiency in Lead-Free CsSnI3 Perovskite Solar Cells

Optimization of all Pb-free perovskite CsGeI3/FASnI3 tandem solar device with 30.42% efficiency: Numerical simulation using SCAPS

Replacing the Electron-Hole Transport Layer with Doping: Scaps Simulation of Lead-Free Germanium-Based Perovskite Solar Cells Based on Csgei3

Constructing gradient structure to increase efficiency for carbon-based hole transport layer free all-inorganic perovskite solar cells using SCAPS-1D

Numerical Investigation Energy Conversion Performance of Tin-Based Perovskite Solar Cells Using Cell Capacitance Simulator

Design and Optimization of All-Inorganic Lead-Free Perovskite Solar Cells with RbGeI3/KSnI3 Heterojunction Structure

A Gradient Heterostructure Based on Tolerance Factor in High-Performance Perovskite Solar Cells with 0.84 Fill Factor.

Pivotal avenue for hybrid electron transport layer-based perovskite solar cells with improved efficiency

Performance optimization of eco-friendly CH3NH3SnI3based perovskite solar cell employing CH3NH3SnBr3as hole transport layer by SCAPS-1D device simulator

Optimization of an inorganic lead free RbGeI3 based perovskite solar cell by SCAPS-1D simulation

Enhancing power conversion efficiency of lead-free perovskite solar cells: a numerical simulation approach

Power Conversion Efficiency Enhancement of Low-Bandgap Mixed Pb–Sn Perovskite Solar Cells by Improved Interfacial Charge Transfer

Synergy of Front‐Surface Energy‐Level Gradient and Lattice Anchoring Effect for Enhancing Perovskite Solar Cell Performance

Enhancing the Efficiency and Stability of Perovskite Solar Cells through Gradient Energy Band Tin Oxide Electron Transport Layer Design with Graphene Quantum Dot Incorporation

Numerical Simulation and Optimization of Highly Stable and Efficient Lead-Free Perovskite FA1−xCsxSnI3-Based Solar Cells Using SCAPS

Strategic integration of electron transport layer for high-performance optimized lead-free double perovskite solar cells with temperature dependence

Performance improvement of HTL-free perovskite solar cells with the graded approach by numerical simulation