Simulating High‐Efficiency, Lead‐Free Inorganic‐Organic Perovskite Tandem Solar Cells with over 46% Efficiency
Basra Sultana,A. T. M. Saiful Islam,Iqra Mamoon,Md. Dulal Haque,Nacer Badi,Ahmad Irfan,Md. Ferdous Rahman
DOI: https://doi.org/10.1002/slct.202404116
2024-11-28
ChemistrySelect
Abstract:This study designed and optimized three structures: a top cell (ITO/ZnSe/CH3NH3GeI3/CuSCN/Ni), a bottom cell (ITO/ZnSe/CH3NH3SnI3/CuI/Ni), and a tandem cell (CH3NH3GeI3/CH3NH3SnI3) combining both. The optimized tandem structure exhibited a higher efficiency of 46.89% (28.47% for top cell and 18.46% for bottom cell), with a JSC of 27.17 mA/cm2, a VOC of 2.04 V, and an FF of 84.31%. Perovskite‐based tandem solar cells (SCs) show significant potential for improving efficiency. In this study, three configurations were designed and optimized: a top cell (ITO/ZnSe/CH3NH3GeI3/CuSCN/Ni), a bottom cell (ITO/ZnSe/CH3NH3SnI3/CuI/Ni), and a tandem cell combining both. Using SCAPS‐1D, the study evaluated how the absorber layer thickness, doping concentration, and defect density affected photovoltaic (PV) performance. It also explored the influence of doping in the back surface field (BSF), interface defect densities, temperature, and back contact work function. The top cell achieved a power conversion efficiency (PCE) of 28.47%, with an open‐circuit voltage (VOC) of 1.21 V, a short‐circuit current density (JSC) of 27.17 mA/cm2, and a fill factor (FF) of 86.24%. The bottom cell reached a PCE of 18.46%, with a VOC of 0.83 V, a JSC of 27.17 mA/cm2, and an FF of 81.839%. The optimized tandem structure demonstrated a notably higher efficiency of 46.89%, with a JSC of 27.17 mA/cm2, a VOC of 2.04 V, and an FF of 84.31%. These results suggest the proposed CH3NH3GeI3/CH3NH3SnI3 tandem design could pave the way for efficient, eco‐friendly, and cost‐effective PV cells in a near future.
chemistry, multidisciplinary