Abstract:A flow injection analysis system (FIA) for the simultaneous determination of salinity, carbonate and ammoniacal nitrogen has been developed and reported in this paper. FIA incorporating membrane units was used, not only for the separation of the gaseous carbon dioxide and ammonia, but also for on-line dilution in the salinity measurement. The sample was injected via a 10-port valve with two sample loops. One loop was used for salinity and carbonate measurements and the second loop for ammoniacal nitrogen determination. A dual-channel capacitively coupled contactless conductivity detector was assembled in a single shielding box. Input voltage from the same AC power supply was fed to the input electrodes of both C4D cells. One channel of the C4D was used to monitor the change in conductivity of an acceptor stream that carried a zone of the water sample that has passed through the on-line dilution unit. Conductivity of this zone relates directly to the salinity of the sample. The same sample zone was next acidified to generate carbon dioxide gas that diffused through a hydrophobic membrane of the first gas diffusion (GD) unit. The zone of dissolved carbon dioxide in acceptor stream of water flowed into the same C4D cell as for the salinity measurement, but arriving at a later time. Concurrently, the second channel of the C4D monitored the change in conductivity of the acceptor stream in the second GD unit due to the diffusion of ammonia gas generated by the reaction of base with the sample injected from the second sample loop. The change in conductivity at this second C4D cell correlates with the concentration of ammoniacal nitrogen present in the sample. The proposed method is low cost, simple, rapid and sensitive. The limit of quantitation for salinity, carbonate and ammoniacal nitrogen are 0.31mmolL-1, 1.85 µmol L-1, respectively. Throughput of 20 samples h-1 for simultaneous analysis can be achieved with RSD of less than 3.8%. The system had been applied to the determination of salinity, carbonate and ammoniacal nitrogen in 15 water samples, with results in agreement with those obtained using comparison methods.

Real-time underway measurement of ammonium in coastal and estuarine waters using an automated flow analyzer with hollow fiber membrane contactor

High-frequency Underway Analysis of Ammonium in Coastal Waters Using an Integrated Syringe-Pump-based Environmental-Water Analyzer (Isea)

Automated Determination of Ammonium in Natural Waters with Reverse Flow Injection Analysis Based on the Indophenol Blue Method with O-Phenylphenol

Analysis of Ammonium in Seawater by Ion Chromatography with Single-Pump Column Switching

A flow injection-fluorometric method for the determination of ammonium in fresh and saline waters with a view to in situ analyses

A Modified Method of On-Line Solid Phase Extraction and Fluorometric Detection for Underway Monitoring and Onboard Analysis of Trace Ammonium in Seawater

A Sensitive Flow-Batch System for on Board Determination of Ultra-Trace Ammonium in Seawater: Method Development and Shipboard Application.

Green analytical method for simultaneous determination of salinity, carbonate and ammoniacal nitrogen in waters using flow injection coupled dual-channel C4D

Field determination of inorganic mercury in seawaters by a portable dual-channel and purge-and-trap system with atomic fluorescence spectrometry

Conductometric determination of ammonium by a multisyringe flow injection system applying gas diffusion

Real-Time Underway Mapping of Nutrient Concentrations of Surface Seawater Using an Autonomous Flow Analyzer

A Modified Method for On-Line Determination of Trace Ammonium in Seawater with a Long-Path Liquid Waveguide Capillary Cell and Spectrophotometric Detection

Reverse Flow Injection Method for Field Determination of Nitrate in Estuarine and Coastal Waters Using a Custom-Made Linear Light Path Flow Cell and the Vanadium Reduction Method

Simultaneous Underway Analysis of Nitrate and Nitrite in Estuarine and Coastal Waters Using an Automated Integrated Syringe-Pump-based Environmental-Water Analyzer

Flow-injection analysis with fluorescence detection for the determination of trace levels of ammonium in seawater

On-Line Solid Phase Extraction and Spectrophotometric Detection with Flow Technique for the Determination of Nanomolar Level Ammonium in Seawater Samples

Development of an Integrated Syringe-Pump-Based Environmental-Water Analyzer (isea) and Application of It for Fully Automated Real-Time Determination of Ammonium in Fresh Water

Simultaneous Determination of Nanomolar Nitrite and Nitrate in Seawater Using Reverse Flow Injection Analysis Coupled with a Long Path Length Liquid Waveguide Capillary Cell.

Automation of flow injection gas diffusion-ion chromatography for the nanomolar determination of methylamines and ammonia in seawater and atmospheric samples

In-field Determination of Trace Dissolved Manganese in Estuarine and Coastal Waters with Automatic On-Line Preconcentration and Flame Atomic Fluorescence Spectrometry.

The Orthogonal Reference Method for In-Situ Analysis of Ammonia Nitrogen Content in Seawater