Abstract:An old industrial site (brownfield) located south of Paris in a flooding plain and containing demolition disposal as well as a burning zone for metal recovery is being regenerated to satisfy local need for public green space. The main objective of the described study was therefore to assess the risk of remobilisation of trace metals, PAH and PCB present. The research focused on vertical migration due to rainfall (non-saturated flow) and to river flooding (saturated flow). To assess the remobilisation risk, representative soil profiles were reconstituted and eluted in columns with artificial rain and filtered river water for 6 weeks with an equivalent of 25 mm d−1. Soil analysis showed that both zones are highly contaminated, exceeding the French environmental standards. Though the superficial metal content was much higher in the burning zone with levels of g kg−1 than that in the demolition zone, most metals showed higher levels in the eluents of the latter. The level of dissolved Zn in the burning zone eluent was 30 μg L−1, while in the demolition zone, it was 300 μg L−1, 40 times the admissible level. Zn was thereby correlated to aromaticity parameter HIX, indicating a link with organic matter transformation. The Cu was only significantly released under saturated condition (up to 80 μg L−1) in the demolition soil, indicating as implicated mechanism manganese and iron oxide reduction rather than organic matter transformation. Despite the high PAH and PCB soil contents, these pollutants were not released. The total PAH content in the effluent was 30 ng L−1 in average and did not significantly differ between the two zones and the types of hydrology. Only Zn and Cu issued from demolition zone presented an eco-toxicological risk. Crossed statistical analysis of the results showed that the role of the soil type is preponderant in the pollutant release and that temporary flooding condition would induce a lower impact on the groundwater quality than an equivalent amount of fallen rain. Though the burning site was far more contaminated in the upper soil than the demolition zone, it presented little risk compared to the demolition zone, more profound and more permeable. The latter showed therefore significative trace metal release, up to 2.1 kg ha−1 year−1 for zinc, doubling the local atmospheric deposition.

Environmental availability of trace metals in a fired brick elaborated from a marine dredged sediment

Investigation of the emission and leaching behavior of characteristic heavy metals in sintered bricks prepared from oil-based drill cutting residues

Transforming restored heavy metal-contaminated soil into eco-friendly bricks: An insight into heavy metal stabilization and environmental safety

Using restored heavy metal contaminated soil as brick making material: Risk analysis upon different scenarios, considering the completeness of bricks

Heavy metal and metalloid emissions during co-processing of waste in a sintering kiln: Migration characteristics in the kiln and long-term leaching from bricks

Environmental Performance of Unfired Bricks Produced from Co-Disposal of Mine Tailings and Municipal Solid Waste Incineration Fly Ash Based on Comprehensive Leaching Tests

Environmental assessment, mechanical behavior, and chemical properties of self-compacting mortars (SCMs) with harbor dredged sediments to be used in construction

Assessment of leaching risk of trace metals, PAHs and PCBs from a brownfield located in a flooding zone

Effective sludge management: Reuse of biowaste and sewer sediments for fired bricks

Developing fired clay bricks by incorporating scrap incinerated waste and river dredged sediment

Mechanical behavior, petrography and microstructural analysis of mining waste recycled bricks

Solidification and stabilization of Pb-Zn mine tailing with municipal solid waste incineration fly ash and ground granulated blast-furnace slag for unfired brick fabrication

A multidisciplinary approach to assess history, environmental risks, and remediation feasability of soils contaminated by metallurgical activities. Part B: direct metal speciation in the solid phase

Recycling of MSWI fly ash in clay bricks-effect of washing and electrodialytic treatment

Resource Utilization of the Dredged Material of Urban river to Manufacture Sintered Brick

The Use of Urban River Sediments As A Primary Raw Material in the Production of Highly Insulating Brick

Comparison of the Fixation of Heavy Metals in Raw Material, Clinker and Mortar Using a BCR Sequential Extraction Procedure and NEN7341 Test

Retention of trace metals by solidified/stabilized wastes: assessment of long-term metal release

Dredged marine sediments stabilized/solidified with cement and GGBS: Factors affecting mechanical behaviour and leachability

Influence of chlorine on co-processing of hazardous wastes in brick kilns

Research Status and Environmental Protection Disposal of Recycled Electrolytic Manganese Residue