Abstract:This paper presents an experimental and an analytical investigation of the behavior of Reinforced Concrete (RC) beams strengthened in flexure by means of different combinations of externally bonded hybrid Glass and Carbon Fiber Reinforced Polymer (GFRP/CFRP) sheets. In order to obtain the mechanical properties of the hybrid sheets, multiple tensile coupon tests were conducted. In addition, an experimental program consisting of a control beam and four beams strengthened in flexure with GFRP, CFRP and hybrid FRP sheets was conducted. The series of the RC beams were tested under four point bending to study the flexural effectiveness of the proposed hybrid FRP sheets. The load–deflection response, strain readings at certain locations and associated failure modes of the tested specimens had been recorded. It is observed that the increase in the load capacity of the strengthened beams ranged from 30% to 98% of the un-strengthened control RC beam depending on the combination of the Carbon/Glass sheets. It was also observed that the ductility at failure loads of the beams strengthened with glass and hybrid sheets is higher than that with a single carbon sheet. Hence, the selection of the optimum combination of hybrid sheets can lead to a strengthening material which provides an improved ductility and strength in beam behavior. The load carrying capacity of the tested specimens was then predicted by the ACI 440.2R-08 guidelines. The predicted and measured results were in good agreement, within 5% for the control beam and for beams with one layer of strengthening sheet and between 13% and 17% for beams with two or more layers of hybrid strengthening sheets. Furthermore, an analytical model was developed to predict the load–deflection response of the tested specimens and the results were compared with the measured experimental data. The results showed that the developed analytical model predicted the response of the tested beam specimens with reasonable accuracy.

Behavior Under Repeated Loading of RC Beams Externally Strengthened in Flexure with SRG Systems

Investigation on Flexural Performance of RC Beams Flexurally Strengthened by Side-bonded CFRP Laminates

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Experimental Investigation on First Crack Strength and Crack Widthof Reinforced Concrete Beamsby Side-Bonding Cfrp Sheets

Strengthening of reinforced concrete beams in shear using different steel reinforced grout techniques

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Investigation On Flexural Behavior Of Reinforced Concrete Beams Flexurally Strengthened By Different Methods

CFRP Strengthened RC Beams with Pre-Strengthening Non-Uniform Reinforcement Corrosion Subjected to Post-Strengthening Wetting/drying Cycles

Bond Efficiency of EBR and NSM FRP Systems for Strengthening Concrete Members

A Design Proposal for Concrete Cover Separation in Beams Strengthened by Various Externally Bonded Tension Reinforcements

Study on flexural performance of cracked RC beams retrofitted with CFRP sheets

Flexural behavior of RC beams strengthened with steel wire mesh and self-compacting concrete jacketing — experimental investigation and test results

Effect of strengthening by carbon fiber reinforced polymer sheets on the flexural behavior of reinforced self-compacting concrete beams under repeated loads

The flexural behavior and efficiency of RC beams strengthened with SNSM bars under the effect of several end conditions and material properties

Behavior of reinforced concrete ring beams strengthened with sustainable materials

Flexural Strengthening of Reinforced Concrete Beams Using Carbon Fiber Reinforced Polymer (CFRP) Sheets with Grooves

Flexural performance of reinforced concrete beams strengthened using near-surface-mounted carbon-fiber-reinforced polymer bars: Effects of bonding patterns

Behavior of reinforced concrete beams strengthened with externally bonded hybrid fiber reinforced polymer systems

Double Linear Strain Distribution Assumption of Rc Beam Strengthened with External-Bonded or Near-Surface Mounted Fiber Reinforced Plastic

Flexural behavior of RC beams strengthened with fully or partially prestressed near-surface mounted FRP strips: An experimental investigation