Water consumption patterns and factors contributing to water consumption in arsenic affected population of rural West Bengal, India.

M. A. Hossain,M. A. Hossain,M. Rahman,M. Murrill,B. Das,B. Roy,S. Dey,Debasis Maity,D. Chakraborti

DOI: https://doi.org/10.1016/j.scitotenv.2012.06.057

2013-10-01

Abstract:

What problem does this paper attempt to address?

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

Yansen Rao,Meng Sun,Bingzheng Zhou,Zhongpeng Wang,Tao Yan,Yu Shao

DOI: https://doi.org/10.1021/acsaem.4c00794

IF: 6.4

2024-01-01

ACS Applied Energy Materials

Abstract:Constructing novel surface microstructures for photocatalytic materials could significantly enhance the photocatalytic hydrogen production rate from water splitting. In this work, novel 2D/3D structured CuCo2S4/CdIn2S4 p-n heterojunction photocatalysts for water splitting were successfully prepared by a solvothermal method. The coupling of a 2D CuCo2S4 nanoplate on the surface of 3D flower-like CdIn2S4 microspheres has strengthened the visible light absorption and promoted the charge separation efficiency due to their tight contacting area. The obtained CuCo2S4/CdIn2S4 (CSCIS-2) photocatalyst exhibited a hydrogen production rate of 1320 mu mol g(-1) h(-1), which was fivefold of that for pure CdIn2S4. Additionally, cyclic tests demonstrated improved photoactivity stability of the samples. A series of photoelectrochemical characterizations confirmed the effective suppression of charge carrier recombination in CuCo2S4/CdIn2S4 composite catalysts. Finally, a rational photocatalytic mechanism was proposed based on the semiconductor band theory. This work contributes to the enrichment of sulfide-based research and applications in photocatalysis.
In situ growth of CdIn2S4 on NH2-MIL-125 as efficient photocatalysts for H2 production under visible-light irradiation

Yuting Zhou,Xiaohan Zhao,Qian Liang,Man Zhou,Xiazhang Li,Song Xu,Zhongyu Li

DOI: https://doi.org/10.1016/j.jpcs.2022.111096

IF: 4.383

2023-02-01

Journal of Physics and Chemistry of Solids

Abstract:Heterojunction engineering is considered an effective strategy to improve the photocatalytic hydrogen production efficiency. In this paper, the novel CdIn2S4@NH2-MIL-125 (CIS@TIM) heterojunction photocatalysts were synthesized by the facile hydrothermal method. And the photocatalytic performance and stability for CIS@TIM of CIS were systematically investigated. Among these catalysts, the optimal catalysts (CIS@ with different ratios TIM-30) exhibited the highest photocatalytic hydrogen rate (2550 μmol g−1 h−1) under visible light illumination, which was more than 3 times that of pure CIS. The enhancement of photocatalytic hydrogen production activity was mainly due to the construction of heterojunction between CdIn2S4 and NH2-MIL-125. The construction of heterojunction can effectively separate photogenerated electrons and holes. Significantly, a rational catalytic mechanism that Z-scheme heterojunction was constructed between CdIn2S4 and NH2-MIL-125 was put forward, which can remarkably boost the photo-redox ability of the CIS@TIM composite. This work provides a new horizon for exploring high-efficient Z-scheme photocatalysts for photocatalytic H2 evolution by the heterojunction engineering.

physics, condensed matter,chemistry, multidisciplinary
Interface Charge Separation in Cu2CoSnS4/ZnIn2S4 Heterojunction for Boosting Photocatalytic Hydrogen Production

Zhen Shi,Wei Jin,Yuhang Sun,Xu Li,Liang Mao,Xiaoyan Cai,Zaizhu Lou

DOI: https://doi.org/10.1016/j.cjsc.2023.100201

IF: 0.847

2023-11-01

Chinese journal of structural chemistry

Abstract:The practical application of hexagonal ZnIn2S4 (ZIS) as a visible-light photocatalyst for hydrogen (H2) production is hindered by rapid internal charge recombination. In this study, we successfully synthesized Cu2CoSnS4 (CCTS) nanocrystals and loaded them onto the surface of ZIS nanosheets to create a p-n heterojunction photocatalyst. The optimized Cu2CoSnS4/ZnIn2S4 (CCTS/ZIS) heterojunction exhibited a significantly higher visible-light photocatalytic H2 evolution rate of 4.90 mmol·g−1·h−1 compared to ZIS and CCTS alone. The enhanced photocatalytic efficiency was attributed to improved electron transfer and charge separation at the heterojunction interface. The formation of p-n heterojunction facilitated the accumulation of valence band electrons in ZIS and conduction band holes in CCTS, effectively suppressing the recombination of photogenerated electrons and holes. Theoretical calculations, spectroscopic, and photoelectrochemical characterizations supported the findings. This work presents a promising approach for designing efficient p-n heterojunction semiconductor photocatalysts for practical applications in visible-light-driven hydrogen evolution.

chemistry, inorganic & nuclear,crystallography
Fabrication of Noble-Metal-Free Mo2C/CdIn2S4 Heterojunction Composites with Elevated Carrier Separation for Photocatalytic Hydrogen Production

Hong Qiu,Xiaohui Ma,Hongxia Fan,Yueyan Fan,Yajie Li,Hualei Zhou,Wenjun Li

DOI: https://doi.org/10.3390/molecules28062508

IF: 4.6

2023-03-10

Molecules

Abstract:Molybdenum-based cocatalyst being used to construct heterojunctions for efficient photocatalytic H2 production is a promising research hotspot. In this work, CdIn2S4 was successfully closely supported on bulk Mo2C via the hydrothermal method. Based on their matching band structures, they formed a Type I heterojunction after the combination of Mo2C (1.1 eV, −0.27 V, 0.83 V) and CdIn2S4 (2.3 eV, −0.74 V, 1.56 V). A series of characterizations proved that the heterojunction composite had higher charge separation efficiency compared to a single compound. Meanwhile, Mo2C in heterojunction could act as an active site for hydrogen production. The photocatalytic H2 production activity of the heterojunction composites was significantly improved, and the maximum activity was up to 1178.32 μmmol h−1 g−1 for 5Mo2C/CdIn2S4 composites. 5Mo2C/CdIn2S4 heterojunction composites possess excellent durability in three cycles (loss of 6%). Additionally, the mechanism of increased activity for composites was also investigated. This study provides a guide to designing noble-metal-free photocatalyst for highly efficient photocatalytic H2 evolution.

chemistry, multidisciplinary,biochemistry & molecular biology
N,P co-doped carbon quantum dots bridge g-C3N4 and SnO2: Accelerating charge transport in S-scheme heterojunction for enhanced photocatalytic hydrogen production

Yaru Shang,Tianxing Liu,Gang Chen,Ehsan Alborzi,Xue Yong,Yu Wang

DOI: https://doi.org/10.1016/j.jallcom.2023.172667

IF: 6.2

2024-01-01

Journal of Alloys and Compounds

Abstract:The preparation of photocatalysts with efficient electron-hole separation efficiency is the key to achieving sustainable utilization of solar energy. Herein, a three-phase composite of N,P co-doped carbon dots (NPCDs), SnO2 nanowires, and g-C3N4 nanotubes (CNNT) is synthesized, forming an S-scheme SnO2/NPCDs/CNNT heterojunction. The construction of S-scheme heterojunction not only improves the reduction ability due to band bending, but also promotes the separation of carriers. The conductive NPCDs are located between SnO2 and CNNT and formed as a unique charge transfer channel that accelerates carriers transfer between S-scheme heterojunction interfaces. Additionally, NPCDs serves as electron acceptors to receive electrons from the conduction band of CNNT, thereby further facilitating the carrier separation. This synergistically boosts the photocatalytic hydrogen production activity of SnO2/NPCDs/CNNT three-phase catalysts, leading to a high H2 yield (10.73 mmol·g−1·h−1) and outstanding cyclic stability. This study offers a strategy for designing heterostructure photocatalysts that enhanced charge separation through interface engineering.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
In-situ constructing ZnIn2S4@In(OH)3@CdS heterostructure for efficient photocatalytic H2 generation under visible light irradiation

Ligang Ma,Chao Lin,Wenjun Jiang,Le Xu,Yujie Shao,Tianyu Zhu,Ting Zhao,Xiaoqian Ai,Xiaoshan Wu

DOI: https://doi.org/10.1016/j.ijhydene.2024.01.007

IF: 7.2

2024-02-01

International Journal of Hydrogen Energy

Abstract:In the face of energy scarcity and environmental degradation, photocatalysis emerges as a green and highly efficient method to convert solar energy into a renewable energy source. In this study, CdS nanoparticles were successfully grown in situ along the edges of ZnIn2S4 nanosheets using ultrasound during the synthesis process and the second phase precipitation of In(OH)3 appeared in the process of preparation. Optimal Cd and S ratios resulted in ZnIn2S4@In(OH)3@CdS heterojunction exhibiting remarkable photocatalytic H2 production performance compared to standalone ZnIn2S4 and CdS. The internal heterojunction interface within the composite naturally generates an electric field, enhancing carrier separation and facilitating their transport. Additionally, the inclusion of In(OH)3 further expedites carrier extraction. Ultimately, the mechanism behind the photocatalytic H2 production was elucidated using the Z-scheme mechanism. This work introduced a novel approach to fabricating multifunctional photocatalysts, presenting a fresh perspective in their design and preparation.

energy & fuels,electrochemistry,chemistry, physical
Fabrication of CoS/CdS heterojunctions for enhanced photocatalytic hydrogen production

Luping Shen,Jiajun Cheng,Xiao Wang,Hongmei Wang,Zhufeng Lu,Liping Guo,Hongxia Ma,Lei Li,Herui Wen

DOI: https://doi.org/10.1016/j.ica.2022.121085

IF: 3.118

2022-10-01

Inorganica Chimica Acta

Abstract:Non-noble metal cocatalyst has showed good potential for improving photocatalytic hydrogen evolution reaction (HER). In this study, the non-precious metal cobalt sulfide (CoS) cocatalyst was deposited onto the CdS surface to construct heterojunctions using a solvothermal method. The fabricated structures were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), UV–visible diffuse-reflectance spectroscopy (UV–vis DRS), photoluminescence (PL), time-resolved PL spectra (TRPL) and photoelectrochemical measurements (PEC). The heterojunctions were evaluated as photocatalysts using the hydrogen evolution reaction with lactic acid as a sacrificial agent. The optimized 60 %-CoS/CdS sample shows a photocatalytic H2 production rate of 3193.7 μmol·h−1·g−1 under visible light (λ ≥ 400 nm), which is 32 times higher than that of pure CdS. The improved performance is attributed to a great improvement in separation efficiency of the photogenerated electron-hole pairs.

chemistry, inorganic & nuclear
Construction of ZnIn2S4/CdS/PdS S‐Scheme Heterostructure for Efficient Photocatalytic H2 Production

Guotai Sun,Zige Tai,Fan Li,Qian Ye,Ting Wang,Zhiyu Fang,Lichao Jia,Wei Liu,Hongqiang Wang

DOI: https://doi.org/10.1002/smll.202207758

IF: 13.3

2023-03-27

Small

Abstract:The ZnIn2S4/CdS/PdS heterostructure is designed via the confinement effect for the first time. The S‐scheme heterostructure is confirmed by in situ irradiated XPS and EPR. The optimized ZnIn2S4/CdS/PdS sample exhibits a high H2 production rate (19.1 mmol g−1 h−1) and AQE (26.26%). It is facing a tremendous challenge to develop the desirable hybrids for photocatalytic H2 generation by integrating the advantages of a single semiconductor. Herein, an all‐sulfide ZnIn2S4/CdS/PdS heterojunction is constructed for the first time, where CdS and PdS nanoparticles anchor in the spaces of ZnIn2S4 micro‐flowers due to the confinement effects. The morphology engineering can guarantee rapid charge transfer owing to the short carrier migration distances and the luxuriant reactive sites provided by ZnIn2S4. The S‐scheme mechanism between ZnIn2S4 and CdS assisted by PdS cocatalyst is testified by in situ irradiated X‐ray photoelectron spectroscopy and electron paramagnetic resonance (EPR), where the electrons and holes move in reverse driven by work function difference and built‐in electric field at the interfaces. The optimal ZnIn2S4/CdS/PdS performs a glaring photocatalytic activity of 191.9 μmol h−1 (10 mg of catalyst), and the largest AQE (apparent quantum efficiency) can reach a high value of 26.26%. This work may afford progressive tactics to design multifunctional photocatalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Novel CoMn2O4-ZnIn2S4 Hollow Heterostructure Cage for Efficient Photocatalytic Hydrogen Evolution

Lijun Liu,Luyang Zuo,Rui Li,Tianlong Xi,Huitao Fan,Bo Li,Liya Wang

DOI: https://doi.org/10.1016/j.apsusc.2023.157646

IF: 6.7

2023-05-01

Applied Surface Science

Abstract:Semiconductor photocatalytic hydrogen evolution (PHE) is used to convert solar energy to hydrogen energy. Therefore, a low-cost, effective, and dependable photocatalyst could be a viable solution to environmental and energy crises. However, performing energy-conversion reactions by preparing photocatalysts with suitable photoabsorption and effective charge separation is challenging. Herein, a novel CoMn2O4-ZnIn2S4 (CMO-ZIS) hollow microcube composite catalyst with a p-n heterojunction is constructed, in which ZnIn2S4 nanosheets are grown in situ on the surfaces of CoMn2O4 hollow microcubes. Surprisingly, 10% CoMn2O4-ZnIn2S4 (CMO-ZIS-10) exhibits a PHE rate of up to 11.04 mmol h−1 g−1, which is approximately 3.6 times higher than that of pure ZnIn2S4. In addition, to maintain the excellent visible light absorption efficiency of ZnIn2S4 nanosheets, the close-contact heterogeneous interface of CMO-ZIS enables easy separation and transfer of the carriers. Furthermore, the hollow structure increases the absorption efficiency of sunlight and provides more active sites, thus increasing the reactivity of photocatalyst. In this paper, we report a workable approach for building heterojunction photocatalysts powered by water splitting.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Promoting Charge Separation in CuInS2/CeO2 Photocatalysts by an S-scheme Heterojunction for Enhanced Photocatalytic H2 Production

Jing Wang,Xingyu Niu,Qi Hao,Kun Zhang,Xinyi Shi,Liping Yang,Hui Ying Yang,Jilei Ye,Yuping Wu

DOI: https://doi.org/10.1016/j.cej.2024.152534

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Low charge separation efficiency significantly hampers the performance of photocatalytic hydrogen production. Constructing heterojunctions emerges as a crucial strategy to enhance photocatalytic activity by improving charge separation. An S-scheme heterojunction not only effectively separates the photogenerated charge in composite photocatalysts but also preserves optimal redox capabilities. This study presents the first report of CuInS2/CeO2 (CIS/CeO2) and demonstrates how charge separation within CIS/CeO2 to enhance photocatalytic hydrogen production through the construction of an S-scheme heterojunction. The UV–visible-driven hydrogen production rate of CIS/CeO2 is 4.6 and 9.4 times higher than that of CIS and CeO2 alone, respectively. The improved photocatalytic performance primarily stems from enhanced charge separation promoted by the S-scheme heterojunction. The charge transfer pathway was confirmed as an S-scheme mechanism through a combination of band structure experiments, density functional theory (DFT) calculations on work function, internal electric field, and charge differential density distribution, alongside electron paramagnetic resonance (EPR) experiments. Multiple perspectives were employed to elucidate the reasons behind facilitating efficient charge separation. This research provides valuable insights for advancing photocatalytic performance.
Constructing a non-noble metal WC/CaIn2S4 Schottky heterojunction photocatalyst for enhanced photocatalytic H2 production

Wenjun Jiang,Liang Zhou,Tan Phong Nguyen,Lingzhi Wang,Jinlong Zhang,Yongdi Liu,Juying Lei

DOI: https://doi.org/10.1002/asia.202400901

2024-09-06

Abstract:To take the pronounced issue of recombination among photogenerated electrons and holes in the photocatalytic reaction, we report a WC/CaIn2S4 Schottky heterojunction photocatalyst using a straightforward one-step hydrothermal method and applied it for the enhanced hydrogen evolution reaction in photocatalysis. A stable Schottky energy barrier can be formed by closely connecting the metal-like WC with the n-type semiconductor CaIn2S4, accelerating the migration of photogenerated carriers. Meanwhile, WC can lower the overpotential for hydrogen evolution, leading to a notable enhancement in the photocatalytic hydrogen evolution rate. The hydrogen evolution rate of the optimal WC/CaIn2S4 Schottky heterojunction photocatalyst WCIS1:1 was approximately 2.3 times higher than that of Pt-loaded photocatalyst CIS+Pt. This study delves into the application significance of the Schottky heterojunction principle in the photocatalytic hydrogen production reaction. Furthermore, this study provides a novel approach to replacing noble metal Pt with metal-like WC in the field of photocatalytic hydrogen evolution.
In-situ constructing cobalt incorporated nitrogen-doped carbon/CdS heterojunction with efficient interfacial charge transfer for photocatalytic hydrogen evolution

Xuli Li,Yangqin Gao,Ning Li,Lei Ge

DOI: https://doi.org/10.1016/j.ijhydene.2022.06.119

IF: 7.2

2022-07-09

International Journal of Hydrogen Energy

Abstract:Designing an efficient heterojunction interface is an effective way to promote the electrons' transfer and improve the photocatalytic H 2 evolution performance. In this work, a novel hollow hybrid system of /CdS has been fabricated and constructed. CdS nanospheres are anchored on the hollow-structured cobalt incorporated nitrogen-doped carbon () through a one-pot in-situ chemical deposition approach, forming an intimate interface and establishing an excellent channel to improve the electrons transfer and charge carriers separation between CdS and cocatalyst, which immensely promotes the photocatalytic activity. The rate of photocatalytic H 2 evolution over hollow structured /CdS heterojunction can be achieved 8.2 mmol g −1 h −1 , which is about 45 times of pristine CdS nanospheres. The photocatalytic H 2 evolution mechanism has been investigated by the techniques of photoluminescence (PL) spectra, photocurrent-time (i-t) curves, electrochemical impedance spectroscopy (EIS) etc. This work aims to provide a new way in developing of high-performance advanced 3D heterojunction for photocatalytic hydrogen evolution.

energy & fuels,electrochemistry,chemistry, physical
Novel noble-metal-free NiCo-LDH/CdSe S-type heterojunction with built-in electric field for high-efficiency photocatalytic H 2 production

Shaochun Hou,Yanyan Li,Wenjun Li,Xiaohui Ma,Yueyan Fan

DOI: https://doi.org/10.1016/j.jtice.2024.105394

IF: 5.477

2024-02-05

Journal of the Taiwan Institute of Chemical Engineers

Abstract:Background Constructing heterojunction is one of the effective strategies for boosting carrier separation. Although CdSe is an excellent photocatalytic material, its activity is still very low. Methods In this paper, NiCo-LDH/CdSe (NCCSe) binary heterojunctions were successfully prepared by a two-step hydrothermal method. The results of photocatalytic tests show that 12NCCSe composites have the highest photocatalytic H 2 production activity, with an average rate of 2929.4 μmol·g −1 ·h −1 , which is 74 times higher than that of pure CdSe (39.5 μmol·g −1 ·h −1 ). Significant findings There are two main reasons for the obvious improvement of photocatalytic activity. Firstly, the separation efficiency of photogenerated carriers is greatly improved, which is attributed to the formation of S-type heterojunction with built-in electric field. Secondly, the addition of NiCo-LDH greatly enhances the light absorption intensity of NCCSe composites, providing more photogenerated electrons. In addition, the mechanism of increased photocatalytic activity for NCCSe S-type heterojunction composites was further discussed. This work provides a thought for constructing NiCo-LDH-based S-type heterojunction for efficient photocatalytic H 2 production, which could easily extend to other LDHs materials. Graphical abstract Download : Download high-res image (177KB) Download : Download full-size image

engineering, chemical
Efficient Schottky heterojunctions of CoP nanoparticles decorated Mn-doped CdS nanorods for photocatalytic hydrogen evolution by water splitting

Feitong Zhao,Xiaohong Yang,Shixian Xiong,Jiangcheng Li,Haitao Fu,Xizhong An

DOI: https://doi.org/10.1016/j.ijhydene.2024.09.334

IF: 7.2

2024-09-30

International Journal of Hydrogen Energy

Abstract:This study reports novel noble-metal-free photocatalytic composites containing CoP nanoparticles modified Mn-doped CdS (MCS) nanorods for producing H 2 by water splitting. MCS nanorods are prepared with various molar ratios of Cd to Mn via a solvothermal method. Compared to other MCS samples, the MCS-8:3 sample with exceptional crystallinity and shorter radial transfer paths displays the highest H 2 production rate, which is used for further modification. To mitigate the recombination of electrons and holes, CoP nanoparticles owning metallic properties are deposited onto the surface of MCS-8:3 as cocatalysts using a deposition–phosphorization method. The influence of the amounts of CoP on the morphology and H 2 production rates was investigated. The testing results indicate that MCS/CoP-7% exhibits significantly enhanced photocatalytic H 2 production rate of 40.5 mmol/g/h. This value is 4.7 times more than that of MCS-8:3, which is higher than most of the reported MCS-based catalysts. The optical and electrochemical experiments reveal that the established heterojunctions between MCS and CoP enable to improve the average charge lifetime, the separation and transfer of photogenerated charge. Furthermore, the band structures of the composites are also estimated. Combining with the XPS results and band structure, the enhanced photocatalytic performances can be attributed to the Schottky heterojunctions with the efficient electron-transfer pathway between MCS and CoP are proposed.

energy & fuels,electrochemistry,chemistry, physical
Effect on the rat uterus of the venom from the scorpion Leiurus quinquestriatus.

O. H. Osman,M. Ismail,M. El-Asmar,S. A. Ibrahim

DOI: https://doi.org/10.1016/0041-0101(72)90059-1

IF: 3.035

1972-06-01

Toxicon

Abstract:
Efficient photocatalytic H2 generation over In2.77S4/NiS2/g-C3N4 S-scheme heterojunction using NiS2 as electron-bridge

Zhuonan Lei,Xiaofei Cao,Jun Fan,Xiaoyun Hu,Jun Hu,Neng Li,Tao Sun,Enzhou Liu

DOI: https://doi.org/10.1016/j.cej.2022.141249

IF: 15.1

2023-02-01

Chemical Engineering Journal

Abstract:Herein, In2.77S4/NiS2 heterojunction was firstly synthesized through an in-situ solvothermal method, then it was introduced to the surface of g-C3N4 to construct a ternary In2.77S4/NiS2/g-C3N4 S-scheme heterojunction via a simple physical solvent evaporation process. The investigation shows that the ternary In2.77S4/NiS2/g-C3N4 heterojunction exhibits an excellent light harvesting ability from 200 nm to 800 nm for the metallic-like NiS2 and the narrower bandgap of In2.77S4, it also has a better charge carrier separation and migration property compared to single and binary components. According to the photocatalytic tests, the photocatalytic H2 production rate over 20 wt% In2.77S4/NiS2/g-C3N4 can attain 7481.7 μmol·g−1·h−1, 52.5, 33.8 and 28.5 times higher than that of g-C3N4, In2.77S4 and In2.77S4/g-C3N4 respectively. Further investigation shows that the charge carriers transfer between g-C3N4 and In2.77S4 follows a S-scheme transfer route on the basis of the photoelectrochemical tests and density functional theory (DFT) calculations. In addition, NiS2 as an electron-bridge can further improve the charge transfer between the interface of g-C3N4 and In2.77S4, making more useful electrons and holes with strong REDOX capacity participating the surface reactions. What’s more, In2.77S4/NiS2 can also induce more electrochemical active sites, which can lead to a faster surface H2 releasing kinetics by reducing the overpotential of H2 evolution. This work offers an effective method for the designing novel g-C3N4-based S-scheme heterojunctions by introducing a charge-bridge to facilitate the charge carrier transfer between different photocatalysts.

engineering, chemical, environmental
Rational Synthesis of S-Scheme CdS/SnS 2 Photocatalysts with Isolated Redox Cocatalysts for Enhanced H 2 Production

P. Anil Kumar Reddy,Hyungu Han,Ki Chul Kim,Sungjun Bae

DOI: https://doi.org/10.1021/acssuschemeng.3c08378

IF: 8.4

2024-03-11

ACS Sustainable Chemistry & Engineering

Abstract:A novel quaternary composite (10-NT6/CC8) comprising a heterostructure 1D CdS and 2D SnS2 embedded with spatially separated redox cocatalysts (cobalt phosphate (CoPi) and nickel phosphide (Ni2P)) was prepared by successive hydrothermal steps. The structural and elemental characteristics have been investigated by transmission electron microscopy, X-ray/ultraviolet photoelectron spectroscopy, UV–vis diffuse reflectance spectra, and N2 adsorption–desorption isotherms. The charge transfer at the interfaces resulted in reduced recombination and decay lifetimes, leading to a high charge carrier density, low charge transfer resistance, and better photocurrent density as evidenced by the photocurrent and photoluminescence studies. The in situ ESR measurements confirmed the production of highly capable redox charge carriers in the composite photocatalysts and confirmed the hole-mediated oxidation of lactic acid to produce hydrogen. Gibbs free energy from density functional theory calculations suggested that CoPi and Ni2P acted as favorable adsorption sites, which ultimately reduced the activation energy for the OER and HER reactions, respectively. 10-NT6/CC8 showed commendable hydrogen (H2) production activity (360.75 μL h–1) that was 30 times to that of the bare CdS (12.25 μL h–1). The 10-NT6/CC8 photocatalyst even produced 44.81 μL h–1 H2 from pure water (in the absence of a lactic acid scavenger) under solar light irradiation. The continuous time-on-stream hydrogen production experiments suggested the photostability of 10-NT6/CC8 even after 7 days of continuous photoactivity. The data obtained by Mott–Schottky and UPS analysis displayed an S-scheme charge transfer mechanism between the CdS and SnS2 heterojunction. The present work contributes to the design and development of various novel combinations of composite heterostructures and redox catalysts for improved photocatalytic hydrogen production.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
Facilitated charge transfer in ZnIn2S4@CuInP2S6 heterojunctions towards efficient photocatalytic H2 generation

Xin Ren,Chenbin Tang,Baorong Xu,Wu Tang,Bo Lin,Guidong Yang

DOI: https://doi.org/10.1016/j.matlet.2022.133654

IF: 3

2023-02-01

Materials Letters

Abstract:Accelerating charge separation and migration in semiconductor photocatalysts is the key for acquiring high performance in the photocatalytic hydrogen generation reaction. In this work, a new ZnIn2S4/CuInP2S6 hetero-structured system (ZIS/CIPS) is designed and constructed. Owing to the presence of face-to-face hetero-interface with high charge-transport capability, the photocatalytic hydrogen generation rate of ZIS/CIPS dramatically enhanced (76.2 μmol h−1) under the visible-light irradiation, which is up to 13 and 190 times compared to that of ZnIn2S4 and CuInP2S6 (CIPS), respectively.

materials science, multidisciplinary,physics, applied
Constructing 0D CoMoS4-3D ZnIn2S4 Heterostructure: Strengthened Visible Light Absorption and Efficient Charge Separation for Boosting Photocatalytic Hydrogen Evolution

Bingzheng Zhou,Meng Sun,Li Wang,Yansen Rao,Tao Yan,Bin Du,Yu Shao

DOI: https://doi.org/10.1016/j.solidstatesciences.2023.107317

IF: 3.752

2023-01-01

Solid State Sciences

Abstract:Constructing heterojunctions with transition metal sulfides is an excellent strategy to reduce the dependency on noble metals in photocatalytic water splitting. Herein, 0D CoMoS4 nanoparticles were first deposited in-situ on the surface of 3D ZnIn2S4 microflowers for constructing heterostructured CoMoS4-ZnIn2S4 (CMS-ZIS) compos-ites. The CMS-ZIS composites showed strengthened absorption capabilities in the visible light region compared with pure ZnIn2S4. The electron microscopy scanning images indicate that countless CoMoS4 particles were loaded into the gaps on the surface of ZnIn2S4 microflowers, resulting in a close interface contact between the materials. The photocatalytic hydrogen evolution (PHE) rate of the optimized CMS-ZIS-3 product is 6.43 folds that of pure ZnIn2S4, which is approximately 3942.1 mu mol g(-1) h(-1). The enhanced activity should be attributed to the promoted carrier transfer rate and reduced recombination efficiency. We inferred the possible mechanism for photocatalytic hydrogen production over CMS-ZIS-3 based on the band potential and photoelectrochemical testing results. This study provides a feasible strategy for designing efficient and cost-effective 0D/3D heterostructures.
A CdS@(PEA)2SnBr4 Heterojunction Photocatalyst for High-efficiency Hydrogen Production

Tingting Wang,Chengxin Zhou,Dan Li,Jian Gao,Cong Fan,Wu Tang

DOI: https://doi.org/10.1007/s10562-024-04666-2

IF: 2.936

2024-05-08

Catalysis Letters

Abstract:The uncertain movement and high recombination of photo-generated charges lead to a low conversion efficiency for photocatalytic hydrogen evolution. The path to address such problem is to construct a high-efficiency organic/inorganic heterojunction. Quasi-2D (PEA) 2 SnBr 4 has the better charge transport characteristics and more negative reduction potential compared with CdS. Herein, a CdS@(PEA) 2 SnBr 4 heterojunction is firstly constructed via in-situ loading CdS nanoparticles on the surface of (PEA) 2 SnBr 4 nanosheets. The interaction between CdS and (PEA) 2 SnBr 4 can effectively separate photo-generated carriers via controlling the carriers of the interface migration to retain the high-energy photo-generated electrons and holes, respectively. Under the simulated sunlight, the CdS@(PEA) 2 SnBr 4 heterojunction with optimum proportion attains a high photocatalytic hydrogen production rate of 13.38 mmol/g/h, up to 2.89 times compared with CdS. More importantly, the CdS@(PEA) 2 SnBr 4 heterojunction possesses a beneficial stability after recycling four times. This work offers a new design thought for the construction of the photocatalytic heterojunction to the inorganic/organic system.

chemistry, physical

Water consumption patterns and factors contributing to water consumption in arsenic affected population of rural West Bengal, India.

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

In situ growth of CdIn2S4 on NH2-MIL-125 as efficient photocatalysts for H2 production under visible-light irradiation

Interface Charge Separation in Cu2CoSnS4/ZnIn2S4 Heterojunction for Boosting Photocatalytic Hydrogen Production

Fabrication of Noble-Metal-Free Mo2C/CdIn2S4 Heterojunction Composites with Elevated Carrier Separation for Photocatalytic Hydrogen Production

N,P co-doped carbon quantum dots bridge g-C3N4 and SnO2: Accelerating charge transport in S-scheme heterojunction for enhanced photocatalytic hydrogen production

In-situ constructing ZnIn2S4@In(OH)3@CdS heterostructure for efficient photocatalytic H2 generation under visible light irradiation

Fabrication of CoS/CdS heterojunctions for enhanced photocatalytic hydrogen production

Construction of ZnIn2S4/CdS/PdS S‐Scheme Heterostructure for Efficient Photocatalytic H2 Production

Novel CoMn2O4-ZnIn2S4 Hollow Heterostructure Cage for Efficient Photocatalytic Hydrogen Evolution

Promoting Charge Separation in CuInS2/CeO2 Photocatalysts by an S-scheme Heterojunction for Enhanced Photocatalytic H2 Production

Constructing a non-noble metal WC/CaIn2S4 Schottky heterojunction photocatalyst for enhanced photocatalytic H2 production

In-situ constructing cobalt incorporated nitrogen-doped carbon/CdS heterojunction with efficient interfacial charge transfer for photocatalytic hydrogen evolution

Novel noble-metal-free NiCo-LDH/CdSe S-type heterojunction with built-in electric field for high-efficiency photocatalytic H 2 production

Efficient Schottky heterojunctions of CoP nanoparticles decorated Mn-doped CdS nanorods for photocatalytic hydrogen evolution by water splitting

Effect on the rat uterus of the venom from the scorpion Leiurus quinquestriatus.

Efficient photocatalytic H2 generation over In2.77S4/NiS2/g-C3N4 S-scheme heterojunction using NiS2 as electron-bridge

Rational Synthesis of S-Scheme CdS/SnS 2 Photocatalysts with Isolated Redox Cocatalysts for Enhanced H 2 Production

Facilitated charge transfer in ZnIn2S4@CuInP2S6 heterojunctions towards efficient photocatalytic H2 generation

Constructing 0D CoMoS4-3D ZnIn2S4 Heterostructure: Strengthened Visible Light Absorption and Efficient Charge Separation for Boosting Photocatalytic Hydrogen Evolution

A CdS@(PEA)2SnBr4 Heterojunction Photocatalyst for High-efficiency Hydrogen Production