Abstract:PI-PD controllers have superior performance compared to traditional PID controllers, especially for controlling unstable and integrating industrial processes with time delays. However, computing the four tuning parameters of this type of controller is not an easy task. Recently, there has been significant interest in determining the tuning rules for PI-PD controllers that utilize the stability region. Currently, most tuning rules for the PI-PD controller are presented graphically, which can be time-consuming and act as a barrier to their industrial application. There is a lack of analytical tuning guidelines in the literature to address this shortfall. However, the existing analytical tuning guidelines do not consider a rigorous design approach. This work proposes new robust analytical tuning criteria based on predefined gain and phase margin bounds, as well as the centroid of the stability region. The proposed method has been tested using various simulation studies related to a DC–DC buck converter, a DC motor, and a heat exchanger. The results indicate that the proposed tuning rules exhibit strong performance against parameter uncertainty with minimal overshoots. Furthermore, the suggested technique for simultaneous control of yaw and pitch angles has been tested in a real-time application using the twin rotor multi-input multi-output system (TRMS). Real-time results indicate that, compared to other methods under investigation, the suggested approach provides nearly minimal overshoots.

Practical approach to mid-ranging control of double-unit actuating systems

Get the design right, the rest is automatic: Towards an adaptive MPC controller

A Pid Controller With Neuron Tuning Parameters For Multi-Model Plants

Collaborative Simulation and Integrated CMAC and PID Optimization and Control of an Aerial Work Platform

Precision Motion Control of Hydraulic Actuators with Performance Guaranteed Online Parameter Estimation

Research on dynamic performance of independent metering valve-cylinder system based on double pressure compound control

Precision Motion Control of Separate Meter-In and Separate Meter-Out Hydraulic Swing System with State Constraints

Robust PI-PD Controller Design: Industrial Simulation Case Studies and a Real-Time Application

New PI-PD Controller Design Strategy for Industrial Unstable and Integrating Processes with Dead Time and Inverse Response

Robust Feedback Compensation and PID Tuning under Actuator Rate Limit Effect Based on Bode’s Integrals

Real-time Gain Tuning of PI Controllers for High-Performance PMSM Drives

Nondimensional analysis and experimental assessment of the PII 1/2 DD 1/2 position control of a rotary axis

Design, Modeling and Dynamic Compensation PID Control of a Fully-Actuated Aerial Manipulation System

Model-based Linear Control of Nonlinear Pneumatic Soft Bending Actuators

Efficient PID Tracking Control of Robotic Manipulators Driven by Compliant Actuators

Design of Multivariable PID Control Using Iterative Linear Programming and Decoupling

Energy saving - Another perspective for parameter optimization of P and PI controllers.

Pneumatic bellows actuated parallel platform control with adjustable stiffness using a hybrid feed-forward and variable gain I-controller

Single Integration for Multi-objective Control

An Approach for Setting Parameters for Two-Degree-of-Freedom PID Controllers.

A Practical Multivariable Control Approach Based on Inverted Decoupling and Decentralized Active Disturbance Rejection Control