Abstract:The user demands for Lithium ion batteries in mobile applications and electric vehicles request steady improvement in terms of capacity and cycle life. State-of-the-art lithium ion batteries irreversibly loose about 10 % of the capacity during the first cycles due to SEI formation. Therefore, 10 % of the cathode material is not used during the rest of the cells life which results in a waste of cathode material and leads to a lowered range of battery electric vehicles. Therefore, these losses must be compensated to ensure efficient resource utilization and to further increase the capacity of the lithium ion battery. We have developed a method to compensate these capacity losses by pre-lithiation: A fast and simple approach of electrolyte-free direct contact pre-lithiation leads to targeted degrees of pre-lithiation in a range of 7-50 % for state-of-the-art graphite electrodes. The parameters pressure (0-40 MPa), temperature (20-150°C) and time (0-60 min) are used to transfer lithium from a temporary substrate to the graphite anode. This process uses 1-5 μm thin lithium films made by the Fraunhofer IWS lithium melt deposition process as a lithium source. [1] The degree of pre-lithiation can be controlled by the lithium loading of the temporary substrate. NCM full cells built with pre-lithiated graphite electrodes where electrochemically evaluated in comparison to unlithiated electrodes. They show 6.5 % capacity increase after the first cycles using the additional lithium to form the SEI during the first cycles. The parameter influence of the pre-lithiation process on the initial coulomb efficiency of cells with pre-lithiated graphite electrodes is examined in half cells showing an ICE of 99.91 % for the best parameters. This method of electrolyte-free direct contact pre-lithiation shows an efficient way to further increase the capacity of state-of-the-art LIBs with graphite electrodes by increasing the cathode material utilization. It can potentially be scaled up to a roll-to-roll process using a heated calender nip. The temporary substrates with tailored lithium loading can be processed by lithium melt deposition in an efficient way with high lithium yield and high precision. [1] K. Schönherr, B. Schumm, F. Hippauf, R. Lissy, H. Althues, C. Leyens, S. Kaskel, Chemical Engineering Journal Advances 2022 , 9 , 100218. Figure 1

Precision Pre-Lithiated Graphite Anode for Lithium-Ion Capacitor with Exceptional High-Temperature Cycling Stability

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Hard carbon/graphite composite anode for durable lithium-ion capacitor

Elucidating the Chemical Pre‐Lithiation Mechanism of Hard Carbon Anodes for Ultra‐high Stability Lithium‐Ion Batteries

Molecularly chemical prelithiation of soft carbon towards high-performance lithium-ion capacitors

Stable cycling and low-temperature operation utilizing amorphous carbon-coated graphite anodes for lithium-ion batteries

A Novel Efficient Three-stage Electrochemical Pre-lithiation method for the Amorphous Carbon Negative Electrodes of Lithium-ion Capacitors

A High-Rate and Ultrastable Anode Enabled by Boron-Doped Nanoporous Carbon Spheres for High-Power and Long Life Lithium Ion Capacitors

A robust in-situ catalytic graphitization combined with salt-template strategy towards fast lithium-ions storage

Pre-lithiated Mesocarbon Microbeads Anode and Bifunctional Cathode for High Performance Hybrid Lithium-Ion Capacitors

Lithium Pre-Storage Enables High Initial Coulombic Efficiency and Stable Lithium-Enriched Silicon/Graphite Anode.

A novel pre-lithiation strategy achieved by the capacitive adsorption in the cathode for lithium-ion capacitors

A Fast and Scalable Pre-Lithiation Approach for Practical Large-Capacity Lithium-Ion Capacitors

Eliminating Graphite Exfoliation with an Artificial Solid Electrolyte Interphase for Stable Lithium‐Ion Batteries

Fabrication of porous lithium titanate self-supporting anode for high performance lithium-ion capacitor

Tailored Pre-Lithiation of Carbon Anodes Using Melt Deposited Thin Lithium

Simultaneous Prelithiation and Compatible Modification Toward Ultrafast and Ultrastable Lithium-Ion Capacitors

Interphase Engineering Enhanced Electro‐chemical Stability of Prelithiated Anode

Electrochemical performance of pre-lithiated graphite as negative electrode in lithium-ion capacitors

Γ-Graphyne Adjusted Diffusion–capacitance Behavior of Lithium Titanate for Boosting High-Rate and Wide-Temperature Lithium Storage

An integrated highly stable anode enabled by carbon nanotube-reinforced all-carbon binder for enhanced performance in lithium-ion battery